Trending March 2024 # Bypass It’s Time To Update Your Device Message On Windows 11/10 # Suggested April 2024 # Top 10 Popular

You are reading the article Bypass It’s Time To Update Your Device Message On Windows 11/10 updated in March 2024 on the website Minhminhbmm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Bypass It’s Time To Update Your Device Message On Windows 11/10

If while installing any software on your Windows 11/10 computer, you see a message It’s time to update your device, then here’s how you can bypass this message. Some Windows users have reported is when they find a message saying ‘It’s time to update your device’ while normally using their PC. Users have also reported that this message pops up when they’re trying to install a .exe package. It can be really annoying to be notified of an update when you’re trying to go about your work, so in this article, we will explain how you can bypass the ‘It’s time to update your device’ message on Windows 11/10.

How do you turn off It’s time to update your device?

If you want to turn off the ‘It’s time to update your device’ message, you can try implementing the solutions mentioned below:

Allow Windows to download third-party apps

Use the Media Creation Tool to update Windows

Switch out of S mode

Disable SmartScreen

It’s time to update your device – Says Windows

Before you begin making any changes, it is important that you comply with some pre-requisites.

Update Windows using the Media Creation Tool

Allow Windows to download apps from third-party sources

Disable SmartScreen temporarily

Switch out of S mode (If applicable)

Now, onto the solutions.

1] Update Windows using the Media Creation Tool

Sometimes Windows updates can be accompanied by errors of all sorts and you can never get over the message in the discussion if that’s the case. A way to sidestep these errors is to use the Windows 10 Media Creation Tool. This will help you update Windows with ease, thus getting rid of the ‘It’s time to update your device’ message. Here’s how to do so:

Visit Microsoft’s official software page to download the Media Creation Tool

Once downloaded, set it up and allot administrative privileges to the app

2] Allow Windows to download apps from third-party sources

Many users have also reported that making this change to their Windows settings has helped them bypass the ‘It’s time to update your device’ message. Here’s what you have to do:

Press the Windows + ‘I’ key combination to open your Windows Settings

From the first tab Apps and features, open the Choose where to get apps drop-down

Here, select Anywhere and close the Settings window to save this change

Repeat the task you were performing when you got the message and you won’t be encountering it anymore.

3] Disable SmartScreen temporarily

You can use the Registry Editor to disable SmartScreen from your Windows computer in an attempt to sidestep this error.

Open the Registry Editor by running the command ‘Regedit’

Visit the following location

ComputerHKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindowsSystem

If this doesn’t help you get rid of the message, you can try one last solution

4] Switch out of S Mode (if applicable)

Now, select the Go to the Store option

Users should note that this process only pertains to those who use the S mode and is a one-time process, so they can’t revert back once it’s done.

How to stop automatic updates in Windows 10?

Another question that is greatly related to the issue at hand here is if there is a way users can halt the automatic updates that Windows initiates, and there is. Follow the steps below to do so:

Open Settings

Here, you’ll see an option to pause Windows updates till a specific time period. Set it up according to your needs and exit the window.

We hope that this post was able to help you and that you are not facing the issues with the ‘It’s time to update your device’ message anymore.

You're reading Bypass It’s Time To Update Your Device Message On Windows 11/10

How To Check Your Screen Time On Windows 11

Within Settings, you’ll only find a simple measure of total screen time and how much each app has depleted battery life. Further controls are available via Microsoft’s Family Safety app, but screen time can only be accessed if you set up a separate child account and device. 

By contrast, Android and iOS let you set app limits and provide lots of data about your own device by default. Becoming aware of where your time is being spend is a useful step towards reducing screen time – something many of us are trying to do. 

However, alongside the limited built-in tools, there is a third-party app available for Windows 11 which offers some additional functionality. It doesn’t quite compare to what you’ll find on a smartphone, but it’s a significant improvement. 

In this article, we’ll run through the three main ways you can check and manage screen time on Windows 11. 

How to check total Windows 11 screen time

As its name suggests, ‘Screen on’ serves as a measure of the total time your device’s display has been switched on. It’s not a completely accurate measure of how long you’re staring at it for – you may leave the screen on while away from your desk or sofa – but it serves as a useful guide. 

To access it on Windows 11: 

The graph is useful for battery life info, but below it you’ll find a figure for ‘Screen on’. This is set to the last 24 hours by default, but you can choose the last 7 days if you prefer

Anyron Copeman / Foundry

How to check Windows 11 screen time per app

Microsoft only provides data for battery usage per app, rather than screen time. That won’t be of any use if your device is plugged in, but the timings are generally accurate if you’ve been running on battery power. 

To view it: 

From the drop-down box next to ‘Sort by:’, choose ‘In use’ 

Each app will now be sorted by the amount of battery power consumed in the time specified above – either 24 hours or 7 days. See the ‘in use’ time in brackets for a guide to screen time

Anyron Copeman / Foundry

But while many Windows 11 devices can last a full working day, most people will plug them in at some point. That makes the data much less reliable, but a third-party app makes things easier. 

How to check Windows 11 screen time using a third-party app

Microsoft is yet to make a dedicated version of Android’s Digital Wellbeing app, but developer Alexandra Sava has.  

Despite being limited to data from the last seven days, it offers Android-style graphs and pie charts for exploring where your time is spent. You can also set individual app limits, tag apps as one of six categories or choose to include any from the data. 

Here’s how to get it: 

Anyron Copeman / Foundry

Once installed, the app will open automatically to the home screen you see below. It sometimes takes a while to update with the latest data, but should be generally accurate

Anyron Copeman / Foundry

In order to collect screen time data, Digital Wellbeing for Windows stays running in the background. It means that when you try to open it, you’ll see a message saying ‘Application is already running. Check your notification tray’. 

Anyron Copeman / Foundry

Related articles

Fix Windows Update Error 0X8024A203 On Windows 11/10

Windows Update is a very useful service that provides a platform for updating the operating system. It helps to ensure that your device is running with the latest features and security updates. However, some users have recently encountered error code 0x8024a203 when they run the Windows Update on their computers. In this post, we have covered some quick and easy solutions that could help you resolve this issue. Now, let’s find out how to resolve it.

Fix Windows Update Error 0x8024a203 on Windows 11/10

Despite the newness of the Windows operating system, users are experiencing multiple problems with it. One of these errors is 0x8024a203, which occurs during the updating of Windows. At this point, the user is unable to download and install the latest Windows update. In case you’re facing the same problem as us, do not worry, we’ve come up with a list of effective solutions to help you with it.

Run Windows Update Troubleshooter

Delete the Temporary Files

Run SFC and DISM tool

Reset Windows Update Components

Manually download and install updates

Let’s now see them in detail.

1] Run Windows Update Troubleshooter

Microsoft Windows comes with various types of troubleshooting tools that can be used to fix various kinds of problems. When you encounter a Windows Update error, you should run the Windows Update troubleshooter first. You can do this by following these steps:

For Windows 11

Open the Windows Settings. For quick access to the Settings app, use the Windows+I keyboard shortcut.

On the left side of the screen select System.

When the troubleshooting process is complete, the problem might be resolved.

For Windows 10

Launch the Windows Settings.

Once you have done this, check if the issue persists.

2] Delete the Temporary Files

If you experience trouble installing Windows updates, you can clear your temporary files and cache. After clearing them, restart your computer and check if it works.

3] Run SFC and DISM

The System File Checker (SFC) is a tool that users can use to detect and restore corrupt system files. If you’re experiencing this problem, it seems some of the files needed for Windows Update are damaged, altered, or missing. In order to restore missing or corrupt system files, you can use System File Checker, followed by Deployment Image Servicing and Management (DISM).

Follow the below instructions to run SFC and DISM:

Run the Command Prompt as an administrator.

Type in sfc /scannow and press Enter.

Wait a few minutes for the procedure to complete. While the system is scanning the code, you can perform any other task you wish.

Once it completes the scanning process, restart your computer to see if it works.

If that doesn’t resolve the problem, run DISM to repair the corrupted Windows Update files.

Copy and paste the following command into the elevated Command Prompt window and press the Enter key:

DISM.exe /Online /Cleanup-image /Restorehealth

Once this is done, restart your computer and the problem should be resolved.

However, if your Windows Update client is already broken, you will be prompted to use a running Windows installation as the repair source or use a Windows side-by-side folder from a network share, as the source of the files.

You will then be required to run the following command instead:

DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess

Here you have to replace the C:RepairSourceWindows placeholder with the location of your repair source.

Once the process is complete, DISM will create a log file in %windir%/Logs/CBS/CBS.log and capture any issues that the tool finds or fixes.

Close the command prompt, and then run Windows Update again and see it has helped.

4] Reset Windows Update Components

This problem can also happen if some type of corruption occurs in your system files. Hence, if you are still experiencing a problem after running the SFC and DISM utilities, you can reset the Windows Update Components and see if it works. Here is a guide to help you do this:

The first thing you need to do is run the Command Prompt as an administrator.

To do so, press the Windows key + R to open the Run dialog box.

In the text field, type in cmd and press Ctrl+Shift+Enter keyboard shortcut.

Once it opens the Command Prompt, type the following commands. After typing each command, press Enter:

net stop bits net stop wuauserv net stop appidsvc net stop cryptsvc

In this case, the Background Intelligent Transfer Service (BITS), Windows Update service, and Cryptographic service will stop working.

It is now time to reset Windows Update components by deleting all qmgr*.dat files from your computer.

To do this, type the below command line in the command prompt and hit enter.

Del "%ALLUSERSPROFILE%Application DataMicrosoftNetworkDownloaderqmgr*.dat"

Afterward, type Y on your keyboard to confirm the deletion.

Next, you should rename the SoftwareDistribution and catroot2 folders.

To do this, run the following commands in the command prompt window. Don’t forget to press Enter after typing each command.

Ren %systemroot%SoftwareDistribution SoftwareDistribution.bak Ren %systemroot%system32catroot2 catroot2.bak

After you have done this, you need to reset both BITS and Windows Update services to their default settings.

To do this, type the below commands in the elevated command prompt window:

sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU) sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

To execute the commands, press Enter after each one.

In the command prompt window, type the following code to move to the System32 directory. Press Enter to continue.

cd /d %windir%system32

Type the following commands, and be sure to hit enter after each command.

regsvr32.exe atl.dll regsvr32.exe urlmon.dll regsvr32.exe mshtml.dll regsvr32.exe shdocvw.dll regsvr32.exe browseui.dll regsvr32.exe jscript.dll regsvr32.exe vbscript.dll regsvr32.exe scrrun.dll regsvr32.exe msxml.dll regsvr32.exe msxml3.dll regsvr32.exe msxml6.dll regsvr32.exe actxprxy.dll regsvr32.exe softpub.dll regsvr32.exe wintrust.dll regsvr32.exe dssenh.dll regsvr32.exe rsaenh.dll regsvr32.exe gpkcsp.dll regsvr32.exe sccbase.dll regsvr32.exe slbcsp.dll regsvr32.exe cryptdlg.dll regsvr32.exe oleaut32.dll regsvr32.exe ole32.dll regsvr32.exe shell32.dll regsvr32.exe initpki.dll regsvr32.exe wuapi.dll regsvr32.exe wuaueng.dll regsvr32.exe wuaueng1.dll regsvr32.exe wucltui.dll regsvr32.exe wups.dll regsvr32.exe wups2.dll regsvr32.exe wuweb.dll regsvr32.exe qmgr.dll regsvr32.exe qmgrprxy.dll regsvr32.exe wucltux.dll regsvr32.exe muweb.dll regsvr32.exe wuwebv.dll

Running the above commands will re-register all the respective BITS files and Windows Update related DLL files

Your next step should be to reset the network configurations that may have contributed to the problematic error.

In order to do that, run the below commands:

netsh winsock reset netsh winsock reset proxy

After you have done this, it’s time to restart the services you stopped earlier, such as Background Intelligent Transfer Service (BITS), Windows Update, and Cryptography.

For this, open the Command Prompt and run the below command line. You must press Enter after each command.

net start bits net start wuauserv net start appidsvc net start cryptsvc

Now close the Command Prompt window and restart your computer.

When your PC starts, go to Windows Updates and see if you can install the pending updates

5] Manually download and install updates

When none of the above solutions resolve the problem, you can try downloading and installing the update manually from the Microsoft Update Catalog and see if that helps.

How do I fix the Windows Update assistant error?

In case you’re having issues with Windows Update Assistant on your computer, you can use the following steps to fix the issue. Restart the Windows Update Service. Run the Windows Update troubleshooter. Temporarily turn off the Third-Party Antivirus program and Windows Defender. Clean up the update cache.

What does Windows Update do?

Windows Update keeps the operating system and other Microsoft programs updated. The security patches and feature upgrades provided by Microsoft prevent malware attacks and other threats. Furthermore, it allows you to view your update history, which lists all the updates that your computer has downloaded and installed.

Related: Fix Windows Update Error 0x80242014.

Windows 10/11 Update Error 0X800703Ed

Windows 10/11 update error 0x800703ed [FIX]

404

Share

X

Antivirus

is the common cause for

update errors

, and if you’re having error 0x800703ed, start by disabling certain antivirus

features

. If that doesn’t

work

, you might have to completely disable or remove your

antivirus

.

If you can’t

update

your

Windows, next

you might want to check your system for

file

corruption

.

To do

that, you just need to run an

SFC

scan. Follow the steps in our guide.

Update errors happen pretty often but you don’t have to get discouraged. You can fix them with our comprehensive solutions in the Windows Update errors section.

How can you fix Windows 10 errors? Just head over to our Windows 10 errors Hub and you will find a plethora of articles with solutions. 

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

Windows 10 is a massive step forward in many categories, with a lot of stability improvements and timely support.

Nonetheless, even though we can expect a lot from Windows 10, there’s still an abundance of issues that need to be addressed.

Yes, we are talking about update errors and the inability to get scheduled updates.

The error we’ll try to troubleshoot today goes by the code 0x800703ed. This error is mainly caused by faulty drivers or system files corruption.

So, in case you’ve encountered an error with this code, follow the steps below.

Update error 0x800703ed can be problematic and prevent you from installing the latest updates. Speaking of update errors, here some similar issues that users reported:

Windows 10 update failed dual boot – According to users, this issue can occur if you’re using dual boot on your PC. To fix the problem, simply make your system partition as active and check if that helps.

0x800703ed Windows 10 upgrade – If you’re having this problem, the issue might be your drivers. However, you can fix the problem by updating your drivers to the latest version.

Solution 1 – Use SFC and DISM scans

If you can’t update your Windows to the latest version due to error 0x800703ed, you might want to check your system for file corruption. To do that, you just need to run an SFC scan. This is relatively simple, and you can do it by following these steps:

Once the scan is finished, check if the problem is still there. If you can’t run SFC scan, or if the issue is still there, your next step would be to run DISM scan. To do that, follow these steps:

Once the DISM scan if completed, check if the issue is still there. If you weren’t able to run SFC scan before, try running it again and check if that solves your problem.

We are aware that the troubleshooting can occasionally be quite annoying, especially with complex issues like this. Furthermore, if you are not experienced enough, you can cause additional issues that may prove even harder to resolve.

Good thing is that tech enthusiasts created the script that can do everything instead of you. You’ll just need to download and run it. Follow these instructions to utilize this helpful tool:

Additionally, you can use this script to troubleshoot any kind of update-related issue.

One thing that is of utmost importance for all-around system performance is updated BIOS. Some of the users weren’t able to even install Windows 10, while others experienced a variety of issues after the installation.

According to users, outdated drivers can cause this issue to occur on your PC. If you’re getting error 0x800703ed, we would have to recommend that you update your drivers.

To update your drivers, simply visit your hardware manufacturer’s website and download the latest drivers for your hardware. This is a relatively simple procedure if you know the model of your hardware and how to download your drivers.

Expert tip:

⇒ Get Outbyte Driver Updater

Solution 5 – Use Windows boot

According to users, you might encounter error 0x800703ed if you’re using both Linux and Windows in a dual boot mode. To fix the problem, you need to set your PC to use Windows boot instead of Linux boot.

To do that, you’ll need a third-party application such as easyBCD. Simply set your PC to use Windows boot and the issue should be completely resolved.

Solution 6 – Check your antivirus

Antivirus is the common cause for update errors, and if you’re having error 0x800703ed, be sure to disable certain antivirus features. If that doesn’t work, you might have to completely disable or remove your antivirus.

If removing the antivirus solves your problem, this might be a perfect time to consider switching to a different antivirus solution.

Why not go with an antivirus that won’t stop your Windows from working as it should? Or won’t interfere with any Windows Updates. 

There a many options for good Windows 10 compatible antiviruses that ensure great protection.

Solution 7 – Make sure that your system partition is set to Active

According to users, this issue can occur if your system partition isn’t set to Active. To fix the problem, you just need to change your partition settings. This is relatively simple, and you can do it by following these steps:

After doing that, try to install the update again. If you don’t want to use Disk Management, you can use any other third-party disk management tool.

Solution 8 – Disconnect all unnecessary devices

If you can’t update Windows 10 due to error 0x800703ed, the problem might be your USB devices. Sometimes other devices can interfere with your PC and that can lead to this and many other errors.

To fix the problem, users are suggesting to disconnect all devices from your PC, except for your keyboard and mouse.

If you have a second monitor, be sure to disconnect it as well and check if that solves your problem. Some users are also recommending to change your resolution to 1024×768 before trying to install the update, so you might want to try that as well.

According to users, sometimes update error 0x800703ed can be caused by your update settings. Your settings can interfere with your system, and that could lead to this and many other errors.

However, you can fix the issue simply by changing a couple of settings. To do that, just follow these steps:

After doing that, try to install the update again.

Solution 10 – Repair system with USB/DVD system installation media

Besides the clean installation, we’ve got one last solution for you. If the previous workarounds fell short, you can use USB/DVD drive with system installation to repair the update issues.

The process is a bit lengthy, but it is certainly worth trying. Follow these instructions closely:

Was this page helpful?

x

Start a conversation

Inaccessible Boot Device Error In Windows 11/10

If you receive INACCESSIBLE_BOOT_DEVICE error after you have upgraded to Windows 11/10, or after you used Reset in Windows 11/10, then this post suggests a way to overcome the issue.

The INACCESSIBLE BOOT DEVICE bug check usually indicates that the Windows operating system has lost access to the system partition during startup. If this happens, the system usually shuts itself down after showing a Blue Screen or Stop Error to protect itself from probable data corruption or loss.

Fix INACCESSIBLE_BOOT_DEVICE Blue Screen

There can be multiple reasons for Inaccessible_Boot_Device Stop error.

Missing, corrupted, or misbehaving filter drivers that are related to the storage stack

File system corruption

Changes to the storage controller mode or settings in the BIOS

Using a different storage controller over the default driver from Windows

Moving the hard disk to a different computer that has a separate controller

A faulty motherboard or storage controller, or faulty hardware

Failure of the TrustedInstaller service to commit newly installed updates because of Component-Based Store corruptions

Corrupted files in the Boot partition

Here are a few suggestions you can try to resolve the issue. See what applies in your case:

If you think a boot device may be at fault, you may need to edit the boot options.

Remove any recently added hardware.

Check if the disk firmware version is incompatible with Windows 11/10. If not, you may need to update to the latest firmware version. See if you need to update the BIOS.

If you recently added a driver, restart your computer, enter Advanced Boot Options menu, select the Last Known Good Configuration option. You may boot Windows into Safe Mode and try a system restore or a Rollback.

If you think the cause could be hard disk corruption, Run Chkdsk /f /r on the system partition. If you cannot boot into Windows, use the Recovery Console and run Chkdsk /r or run Chkdsk from the Repair Console.

Read: UNMOUNTABLE_BOOT_VOLUME Blue Screen Error

Advanced troubleshooting for Stop error 7B or Inaccessible_Boot_Device 1] Verify that the boot disk is connected and accessible.

Boot into Advanced Recovery, and then open Command Prompt. Here we will figure out if the boot disk is connected and available.

Microsoft recommends that you execute diskpart, and then run list disk command. This command will reveal the list of physical drives that are attached to the computer. If they are connected, you should receive details just like the image below:

Note: 

UEFI interface will have an asterisk () in the **GPT* column.

BIOS interface will not have an asterisk in the Dyn column.

If the list disk command lists the OS disks correctly, run the list vol command in diskpart. It should generate an output similar to the next image.

The image above displays Volume 1 as the boot disk. If there is no similar listing, you may have to either repair the boot partition on your own or connect with the service center of the OEM.

2] Verify the integrity of the Boot Configuration Database

Boot Configuration Database, a replacement of chúng tôi file, contains boot configuration parameters and controls how the operating system is booted. If there is any corruption or misconfiguration, we will have to fix it. Before that, let’s diagnose if there is a problem.

Boot into Advanced Recovery, and then open Command Prompt. Type bcdedit and hit Enter. You should results like in the image below. UEFI and BIOS have their slight differences.

The BIOS interface will not have any path, but the drive. But the UEFI interface will show a complete path in the device partition parameter.

a] Set default device partition

Take the backup of BCD using the command bcdedit /export C:tempbcdbackup. To restore at a later stage, you can replace /export with /import.

If the device under {default} is wrong or missing, run the bcedit command with the set option bcdedit /set {default} device partition=C:

b] Re-create the BCD completely

If you receive an error message which says The boot configuration data store could not be opened, The system could not find the file specified, then execute bootrec /rebuildbcd on the Command Prompt.

c] Verify Location of winload and bootmgr

bootmgr: %SystemDrive%bootmgr

winload: %SystemRoot%system32winload.exe

Before going ahead, make sure to make a backup of all the contents under the SYSTEM partition to another location. It will come in handy if something goes wrong. Use the Command Prompt to navigate to the System drive, and create a folder where you can back up everything.

Navigate to these directories, and unhide files using Attrib -s -h -r command. If they are not in their place, let’s rebuild it.

Where “OSDrive” is where Windows is available, and the system drive is where the bootmgr resides.

Reboot and see if this has helped.

If nothing works, you may have to fresh-install your earlier OS, viz. Windows 8.1 or Windows 7 operating system, activate it, upgrade to Windows 11/10, activate it and then clean install Windows using ISO.

TIP: This post will help you if you receive a Blue Screen after Windows Updates.

How To Update Skype On Windows 10, Windows 8

How to update Skype on Windows 10, Windows 8

256

Share

X

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

Microsoft’s IM client, Skype, has a lot of users all over the world. It’s simple user interface and attracting features have made it quite popular. If you’ve installed Skype on your Windows 8, Windows 10 or Windows 8.1 device, you will probably want to receive all the Skype updates so that it will work properly and you won’t have to uninstall it later on.

Maintaining Skype on Windows 8, Windows 10 is quite easy, as it is a very well designed program that it constantly updates by Microsoft, in order to make it as good as possible. Even so, in some situations, it cause some minor problems for certain users. If you want to know how to update Skype on Windows 8, Windows 10 and Windows 8.1 to ensure that it works flawlessly, take a look here and find out.

Updating Skype on Windows 10, Windows 8 and Windows 8.1 [Desktop and App]

So, as you know, there are two versions of Skype available for Windows 10, Windows 8 users: there is the desktop program that can be installed on computers running Windows 10, Windows 8, and there is the Windows Store Skype app that can be accessed via the Start Screen.

If you don’t have this feature turned on, you can do so by opening Skype and navigating to the “Tools” menu and selecting “Options“. Under “Advanced” you will find a sub-category named “Automatic Updates“. Here you will see if this service is turned on. If you it is not, you can turn in on and from now on, at every startup, Skype will search for an update.

For more information regarding Skype desktop updates, you can take a look at the Skype Support website, where you will find more information on this matter.

The Skype App for Windows 10, Windows 8 and Windows 8.1 is also very easily updated. As you might know, when you start your Windows 8, Windows 10 device, the Store will notify you if you have updates to make. Microsoft releases periodic updates for its apps, and if they will release one for Skype, you will be able to see in the list of apps to update on your Store app.

Expert tip:

Note: Keep in mind that the Store app also has a option to search for updates automatically, so be sure to have it turned on.

You can also check for updates manually. To do this, go to Help and select the ‘Check for updates’ option from the drop-down menu.

Skype will then search for updates. A new update window will appear on the screen allowing you to install the latest updates. If you’re using old Skype versions, you have two possibilities: you can either install the latest updates for your your current Skype version or upgrade to the new version.

Speaking of updates, it is worth mentioning that all Skype users will have to switch to the new Skype version starting May 25. Microsoft already began notifying users that old Skype version will no longer work after May 25.

We noticed you are using a version of Skype for Windows 10 that will no longer work after May 25, 2023. Older conversation history may be impacted during the upgrade.

Now you know how to update Skype on Windows 10, Windows 8 and Windows 8.1. The process is almost automatic, and it will allow you to have the best experience that Skype can offer. Be sure to have your desktop client check for updates when you start Skype, and take a regular look at your Skype updates.

RELATED STORIES TO CHECK OUT:

Was this page helpful?

x

Start a conversation

Update the detailed information about Bypass It’s Time To Update Your Device Message On Windows 11/10 on the Minhminhbmm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!