Trending March 2024 # Disable Automatic Reboots After Windows 10/11 Updates # Suggested April 2024 # Top 4 Popular

You are reading the article Disable Automatic Reboots After Windows 10/11 Updates updated in March 2024 on the website Minhminhbmm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Disable Automatic Reboots After Windows 10/11 Updates

Disable automatic reboots after Windows 10/11 updates

542

Share

X

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

Windows 10 is all about updates. When Microsoft presented the the idea of “Windows 10 as a service”, it became clear that users won’t be able to use the system properly without installing updates. However, as good as Windows 10 updates are, there’s still one thing the the most users find annoying.

That, of course, are unexpected restarts when installing updates. Ever since Microsoft introduced updates for Windows, it is required to restart your computer to install them. User of previous versions of Windows had major problem with that, as installing updates interrupted, and wasted a lot of users’ work.

In Windows 10, however, the situation is slightly better. Windows Update now offers you full control over installing updates, as you can choose when exactly you want your computer to restart and install downloaded updates. But some users still don’t seem satisfied, as they usually forget to set a restarting time, and end up having their computers unexpectedly rebooted once again.

Because of that, users want to completely disable automatic restarts, and install updates when they choose to. That was possible in some previous versions of Windows, using the Group Policy Editor, but Microsoft removed this option in Windows 10. However, there’s actually a way to disable automatic restarts using another method, and we’re going to show you how.

First thing you need to do is to the Reboot task in Task Scheduler. If you’re not sure how to do that, just follow these instructions:

Go to Search, type task scheduler, and open Task Scheduler

Once you’ve disabled Reboot, you need to forbid all users and groups from your computer to access this file. That way, you’ll disable automatic reboot for all users, and system also won’t be able to turn it back on. Here’s what you need to do:

Go to this path: C:WindowsSystem32TasksMicrosoftWindowsUpdateOrchestrator

Now, find the Reboot file, and take ownership over it. If you don’t know how to do that, check out this article.

We assume you’ll stay on the Advanced Security window after taking ownership over the file, so now go to Disable inheritance

Once you perform this action, all users and groups should be removed. If there are any left, remove them manually

You should see only permission now on the “Advanced Security Settings” page, and that one should be full control for your user account

There you go, after performing this process, your computer won’t reboot automatically every time you download a new update. But don’t be confused, this won’t prevent your system from receiving updates, they just won’t be fully installed until you restart your machine by yourself.

RELATED STORIES YOU NEED TO CHECK OUT:

Still experiencing troubles? Fix them with this tool:

SPONSORED

Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?

x

Start a conversation

You're reading Disable Automatic Reboots After Windows 10/11 Updates

Fix Black Screen After Windows Update In Windows 11/10

Microsoft releases Windows Updates periodically in order to fix bugs reported by users and add new security features to the users’ systems. Sometimes, Windows Updates cause problems. One such issue reported by some users is a black screen after installing a Windows Update. When you download Windows Update, your computer needs to be restarted in order to install the update. After successful installation, you will be able to use your computer. But if a black screen occurs, you will be unable to use your computer. In this article, we will see how to fix the Black Screen issue after Windows Update.

Why is my PC screen black on Windows 11?

If your Windows 11/10 PC screen is black, your display driver might have been corrupted. You should boot into Windows Safe Mode and update your graphics driver from there. Another cause of this problem is the corrupted system image files. Also, check your monitor connections. It is also possible that the cable connecting your monitor is damaged.

How to fix Black Screen after Windows Update

If you see a Black Screen after Windows Update on your Windows 11/10 PC you will be in any one of the following situations:

Check your display cables (solution for Desktop users)

Close the lid and open it again (solution for laptop users)

Disconnect all external hardware

Use a key combination to wake up your display

Repair your system files

Update your display adapter

Perform System Restore or uninstall Windows Update

Reset your PC

Let’s see all these fixes in detail.

Fix Windows Update black screen 1] Check your display cables (solution for Desktop users)

If you are a desktop user, it might be possible that your display is showing you a black screen due to loose connections or a faulty display cable. Check your display connections. If another computer is available, connect your monitor to that computer. This will let you know whether the issue is associated with your display or not. For this, you can also use your friend’s computer

2] Close the lid and open it again (solution for laptop users)

Laptop users can try this. Close your laptop lid and open it again. See if this resolves the issue or not.

3] Disconnect all external hardware

Sometimes, faulty hardware connected to a computer causes issues. You can check this by disconnecting all your external hardware devices. After disconnecting your hardware devices, force shut down your computer by pressing and holding the power button. After this, wait for a few minutes and turn on your computer. See if it resolves the issue.

4] Use a key combination to wake up your display

In Microsoft Windows operating system, you can wake up your display by using the Win + Ctrl + Shift + B key combination. Use this key combination and see if it helps.

5] Repair your system files

One possible cause of this problem is system file corruption after Windows Update. In some cases, Windows Update causes problems on a computer. We suggest you repair your system files. To do so, you have to enter Windows Recovery Environment.

Because your display is black, you have to interfere with the normal startup process in Windows to enter the Recovery Environment. To do so, press and hold the power button to force shut down your computer. After that, turn it on again. When you see the Windows logo or your computer manufacturer’s logo, immediately press and hold the power button to force shit down your system again. Repeat this process until you see the Automatic Repair screen.

Now, follow the steps written below:

In the Command Prompt, you will see the following:

You have to select the drive on which Windows is installed. In most cases, it is the C drive. Hence, type the following command and hit Enter.

C: 5] Update your display adapter

If you have tried all the above fixes but your display is still showing a black screen, the problem might be associated with your display driver. We suggest you update your display driver.

To do so, you have to start your computer in Safe Mode via Windows Recovery Environment.

Your screen should be visible in Safe Mode. Now, download the latest version of your display driver from the manufacturer’s website and install it.

After installing the driver, restart your computer. Your problem should be fixed.

Related: Fix Black screen when playing games on Windows.

7] Perform System Restore or uninstall Windows Update

After you uninstall the update you may want to hide the problematic update.

8] Reset your PC

If none of the above solutions worked for you, resetting your PC will be the last option. Again, you have to use Windows Recovery Environment for resetting your PC. While using the Reset this PC option, select Keep my files if you do not want your data to be deleted.

Does Windows 11 have display issues?

No, Windows 11 does not have display issues. However, problems can occur on any machine. Hence, you may experience display issues on your computer irrespective of the operating system installed on it. Display issues usually occur due to the corrupted display driver and system image files. In some cases, it is a hardware issue.

Read next: Screen stays black after waking the computer from Sleep Mode.

How To Run Windows Updates From Command Line In Windows 11/10

Windows Updates can be run from PowerShell and Command Prompt in Windows 11/10. In this article, we will be checking out how to do it. Windows Update is one of the most highlighted features of Windows 10. Because with the release of Windows 10, Windows was offered to the customers as a service rather than a product. Under the scenario of Software as a Service, this led to the Windows Updates on Windows 10 being on by default and without an option for anyone to disable it.

Now, while some criticized this move by Microsoft, ultimately this is a step towards the customer’s greater good. Because Windows Update helps the users stay secured against all kinds of threats and provide them with the latest and the greatest from Microsoft. So, for those who appreciate this service, today we are going to talk about another way to run these updates.

Run Windows Updates from Command Line

The following methods will be carried out to run Windows Update from Command Line on Windows 11/10-

Using Windows Powershell.

Using Command Prompt.

1] Run Windows Update using Windows Powershell

Running Windows Updates on Windows Powershell will require you to manually Install the Windows Update module, Get Windows Updates downloaded and Install Windows Updates. And for this, open Windows Powershell by searching for Powershell in the Cortana search box and run it with Administrator level privileges.

Install the PSWindowsUpdate Module

Type in,

Install-Module PSWindowsUpdate

to install the Windows Update module for Windows Powershell.

Check for Updates

After that,

Get-WindowsUpdate

to connect to the Windows Update servers and download the updates if found.

Install Updates

Finally, type in,

Install-WindowsUpdate

to install the Windows Updates downloaded on your computer.

Check for Microsoft Updates Add-WUServiceManager -MicrosoftUpdate Install specific updates only Get-WindowsUpdate -KBArticleID "KB1234567" -Install Hide specific Update Install-WindowsUpdate -NotKBArticle "KB1234567" -AcceptAll Skip Updates belonging to specific categories Install-WindowsUpdate -NotCategory "Drivers","FeaturePacks" -AcceptAll

Related: Command-line switches to deploy Microsoft software Update packages

2] Run Windows Update using Command Prompt

Command Prompt on Windows Operating Systems exists since a very long time whereas Windows Powershell is comparatively new. Hence, it has similar capabilities to run Windows Updates, but the highlighting point here is that you do not need to download any module for Windows Updates.

First, open Command Prompt by searching for cmd in the Cortana search box and run it with Administrator level privileges.

Finally, type in the following commands and hit the Enter key in order to perform the respective operations,

Start checking for updates: UsoClient StartScan Start downloading Updates: UsoClient StartDownload Start installing the downloaded updates: UsoClient StartInstall Restart your device after installing the updates: UsoClient RestartDevice Check, Download and Install Updates: UsoClient ScanInstallWait

It is worth noting that, the Command Prompt commands mentioned above are just meant for Windows 11/10 only.

How to enable the Windows Update service in Windows 11/10?

If the Windows Update service is disabled or is set to run manually, then you can enable the Windows Update service in Windows 11/10 using the following steps:

Type services in the Search box and use Enter key

In the Properties window, set the Startup type to Automatic

Press the Start button to run the service

Press Apply button and OK button to save the changes.

How do I know if Windows Update is installed in Command Prompt?

If you want to check the history of installed security updates or critical updates in Command Prompt on Windows 11/10, then first open the elevated Command Prompt window and execute wmic qfe list command. This will show the update description, update ID (or Hotfix ID), Installed by, Installed On, etc., information. Here, do note that not all Windows Updates are visible. So, it is better to access the Update history section in the Settings app of Windows 11/10 to see all the installed updates.

Related read: How to Update Drivers using Command Prompt.

How To Disable Bitlocker On Windows 11

Another way to disable BitLocker, open PowerShell (admin) and run the “Disable-BitLocker -MountPoint “C:”” and “$BLV = Get-BitLockerVolume” and “Disable-BitLocker -MountPoint $BLV” commands.

On Windows 11, you can disable BitLocker (or suspend the feature) in at least two ways from the Settings app and using commands from PowerShell, and in this guide, you will learn how. Although BitLocker allows you to use encryption on a drive to protect your data from unauthorized access, it has a caveat. It may cause problems when for certain operations, such as when upgrading to a newer version of Windows 11, updating non-Microsoft apps, or when the system may need to install a firmware update. 

If the encryption feature is causing issues, you don’t need to disable it. You only have to suspend the feature, complete the task, and then resume BitLocker. Now, in the case that you no longer need to protect your data with encryption, then you can disable BitLocker completely. You can perform these tasks on Windows 11 Pro, Enterprise, and Education through the Settings app or PowerShell.

In the case that you have Windows 11 Home, then you need to use these instructions to disable BitLocker device encryption.

This guide will teach you the steps to temporarily or permanently disable BitLocker on Windows 11.

Disable BitLocker permanently on Windows 11

If you want to stop using BitLocker, you can disable the feature altogether through the Settings app and PowerShell.

To disable BitLocker on Windows 11, use these steps:

Select the drive to disable encryption.

After you complete the steps, BitLocker will disable encryption on the specified drive on Windows 11.

Turn off BitLocker temporarily from PowerShell

To disable BitLocker with PowerShell commands on Windows 11, use these steps:

Open Start.

Type the following command to disable BitLocker on Windows 11 and press Enter:

Disable-BitLocker -MountPoint "C:"

(Optional) Type the following command to BitLocker for all drives on Windows 11 and press Enter:

$BLV = Get-BitLockerVolume Disable-BitLocker -MountPoint $BLV

Once you complete the steps, the system will decrypt the drive and disable BitLocker permanently on Windows 11.

Disable BitLocker temporarily on Windows 11

On Windows 11, you can suspend BitLocker encryption in at least two ways through the Settings app and PowerShell.

To turn off BitLocker temporarily on a Windows 11 drive, use these steps:

Open Settings on Windows 11.

Select the drive with protection to suspend encryption.

Once you complete the steps, the encryption protection will be temporarily disabled, allowing you to perform updates, such as firmware and non-Microsoft app updates.

Turn off BitLocker temporarily from PowerShell

To suspend BitLocker with PowerShell commands, use these steps:

Open Start.

Type the following command to suspend BitLocker on the system drive and press Enter:

Suspend-BitLocker -MountPoint "C:" -RebootCount 0

After you complete the steps, the system will disable BitLocker temporarily on the system drive, allowing you to perform different tasks that otherwise could cause problems. The “-RebootCount 0” option specifies the many times the computer will reboot before re-enabling BitLocker. You can change the number to a maximum of 15.

If you want to resume the protection immediately, you can use the same instructions outlined above, but in step 3, run the Resume-BitLocker -MountPoint "C:" command.

Disable Driver Signature Enforcement To Install Unsigned Drivers In Windows 11/10

If you receive Windows requires a Digitally Signed Driver message, then this post will show you how to disable Driver Signature enforcement permanently via Advanced Startup Options or CMD in Windows 11/10/8/7. This will allow you to install Unsigned Drivers. Driver Signing is the process of associating a digital signature with a driver package.

Driver Signing is the process of associating a digital signature with a driver package. Windows device installations use digital signatures to verify the integrity of the driver packages and to verify the identity of the vendor who provides the driver packages.

The drivers you normally install on your computer from Windows Update, Original Equipment Manufacturers, or some 3th-party driver download software, etc. must be digitally verified by Microsoft via a digital signature. It is an electronic security mark that certifies the publisher for the driver, as well as all the relevant information related to it. If a driver isn’t certified by Microsoft, Window won’t run them on either 32-bit or 64-bit system. This is referred to as “driver signature enforcement”.

Windows requires a Digitally Signed Driver

Windows 11/10 will load only Kernel-mode drivers signed digitally by the Dev Portal. However, the changes will affect only the new installations of the operating system with Secure Boot on. The non-upgraded fresh installations would require drivers signed by Microsoft. At times you may receive a message – Windows requires a Digitally Signed Driver. If you wish you can disable Driver Signature enforcement. Let us see how to do it.

Disable Driver Signature Enforcement on Windows 11/10

There are three options available to you-

Use Advanced Boot Menu

Enable Test Signing Mode

Disable Device Driver Signing.

How to Install Unsigned Drivers in Windows 11/10 1] Use Advanced Boot Menu

Hold down the Shift key while choosing the “Restart” option in Windows. Your computer will restart with Advanced Options. From the list of options displayed, select the “Troubleshoot” tile.

Next, select “Advanced options” and hit the “Startup Settings” tile.

Next, select the “Restart” button to restart your PC on the Startup Settings screen.

You will see the following screen on restart. Press the 7 keyboard key to activate the “Disable driver signature enforcement” option.

Once done, your PC will reboot with driver signature enforcement disabled, and you’ll be able to install unsigned drivers.

Having said that, the next time you restart your computer, driver signature enforcement will be disabled.

2] Disable Device Driver Signing

Run Command Prompt as Administrator and execute the following command:

bcdedit.exe /set nointegritychecks on

This will automatically disable driver signature enforcement on your device.

If you wish to enable this feature back again, you need to execute the following command in an elevated cmd window:

bcdedit.exe /set nointegritychecks off

To be able to do this, Secure Boot Policy will have to be disabled.

If you decide to exit this mode, run the following command:

bcdedit /set testsigning off

Hope this works for you.

3] Enable Test Signing Mode

Next, paste the following command into the Command Prompt window and press Enter:

bcdedit /set testsigning on

If a message is displayed on the screen reading “The value is protected by Secure Boot policy”, it means Secure Boot is enabled for your computer’s UEFI firmware.

Disable it in your computer’s UEFI Firmware Settings to enable test signing mode via Advanced Startup Options.

Restart your computer to enter test mode. A “Test Mode” watermark should be visible in the bottom right corner of your computer screen. When you see this, it indicates no restriction for installing unsigned or not verified drivers.

You need to know that Driver Signing is a security feature that protects your system and you should consider re-enabling it as soon as it is possible.

How to find unsigned drivers in Windows 10?

Windows computers come with a built-in tool that helps you find all the unsigned drivers. This tool is File Signature Verification Tool. You can run it using the sigverif command in the Run command box. Unsigned drivers may be malware and they may cause damage to your system. Therefore, it is important to check if an unsigned driver is installed on your system or not.

What is disable driver signature?

That’s it!

Windows 10 Deactivated Itself After Update

Windows 10 Deactivated Itself After Update [6 Quick Fixes] Surefire fixes to restore your activation in no time

309

Share

X

If Windows 10 deactivates itself after an update, it might be because of corrupt system files.

A quick yet effective solution to this issue is to perform a system restore to a time when your PC is working well.

Another effective fix is to repair the broken system files using built-in tools or dedicated software.

Have you updated your operating system to Windows 10, and it quickly deactivated itself after some time? If so, don’t worry: you’re not the only one.

Turn out this is a big issue with Windows 10, but luckily, this article will show you how to fix this problem quickly.

1. Run an SFC scan

The first thing you need to do if Windows 10 deactivated itself is to search for faulty system files. Running the SFC scan should fix or replace any file causing problems.

2. Validate your product ID via Command Prompt 3. Reset your PC 4. Use System Restore

With this, your system should return to a time when it was working well.

5. Clean install Windows 10

If you still cannot fix the Windows 10 deactivated itself issue after applying the fixes above, you might need to perform a clean install of the OS.

While this process can be time-wasting, it will help reactivate your PC, as you will need to enter the activation key during the installation. For everything, you need to make it successful, check our guide on how to clean install Windows 10.

6. General activation solutions that may help you

However, if you don’t want to resort to complex and irreversible solutions, such as clean installing Windows 10, follow the steps below.

Indeed, a few users confirmed that these methods worked for them, but the fact is that some of these solutions may help you activate the OS. You’ve got nothing to lose if you try them out.

6.1. Launch the Activation Troubleshooter

You could run the Activation Troubleshooter if the digital license activation failed after Windows 10 deactivated itself. This tool will check for activation conflicts and hopefully resolve them.

6.2. Run a full system scan

Expert tip:

Perform a full system scan to detect any malware running on your computer. You can use Windows’ built-in antivirus, Windows Defender, or third-party antivirus solutions.

Finally, install all available updates, including the optional ones.

6.4. Check your disk for errors

Launch Command Prompt as admin.

Copy and paste the command below and hit Enter: chkdsk c: /r

If you get any prompt, press the Y key and wait for the command to finish running.

Some users reported they could activate Windows 10 after checking their disk for errors. Of course, perform this check on the disk where you installed the OS.

6.5. Clean your temporary files and folders

The simplest and quickest manner to delete your temporary files and folders is to use Disk Cleanup. Using your computer or browsing the Internet, your PC accumulates various unnecessary files.

These so-called junk files may affect your computer’s processing speed, causing apps to respond slowly and triggering various error codes. In rare cases, they can even push Windows 10 to deactivate itself.

If all the above methods fail to address this problem and you can’t use your key to activate the OS, try contacting Microsoft Support. You can chat online with a Microsoft Support Engineer or call Support directly.

With this, we can conclude this guide on how to fix the Windows 10 deactivated itself issue. All that is left for you to do is follow the instructions carefully, and you should regain your activation status.

If you want to know how long you can use Windows 10 without activation, check our detailed guide for all the necessary information.

Was this page helpful?

x

Start a conversation

Update the detailed information about Disable Automatic Reboots After Windows 10/11 Updates on the Minhminhbmm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!