Trending February 2024 # Error 1722: How To Fix This Windows Installer Package Issue # Suggested March 2024 # Top 4 Popular

You are reading the article Error 1722: How To Fix This Windows Installer Package Issue updated in February 2024 on the website Minhminhbmm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Error 1722: How To Fix This Windows Installer Package Issue

Error 1722: How to Fix This Windows Installer Package Issue

455

Share

X

You may encounter Error 1722 (Windows Installer package error) while trying to install or remove a program from your device.

The issue is caused by installing a program incorrectly or when a program running as part of the setup did not finish as expected.

You can use Safe Mode to install applications or update the software to resolve this problem.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Fix Windows 11 OS errors with Fortect:

This tool repairs common computer errors by replacing the problematic system files with the initial working versions. It also keeps you away from system errors, BSoDs, and repairs damages made by malware and viruses. Fix PC issues and remove viruses damage now in 3 easy steps:

Download and Install Fortect on your PC

Launch the tool and Start scanning to find broken files that are causing the problems

Fortect has been downloaded by

0

readers this month.

When you use Windows 11, the built-in Windows Installer handles the installation, maintenance, and removal of software on your PC.

If your Installer is faulty, you might encounter errors while trying to install or remove a software program. A typical one is Error Code 1722. An error may also appear due to issues with your computer system in the following format:

Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

It is worth noting that you are likely to experience the error when you are trying to install:

Java

Security software

Drivers

Games

Microsoft products

What causes the Windows Installer 1722 Error in Windows 11?

When installing new software on your computer, errors do occur. Sometimes, this is due to the fact that the program needs a component that is no longer available on your PC or because there is a conflict with another software that’s already installed.

This can also be caused by an incorrect installation of another application because they leave traces behind and sometimes make changes in the registry. 

The registry holds all settings for them on your computer. When making changes here, they can cause errors in other programs.

When you use different kinds of software that make changes in the same area of ​​the registry it can lead to conflicts between them. These conflicts can prevent your software from working correctly.

What can I do about the Windows Installer 177 Error in Cisco VPN client?

Error 1722 Windows Installer is one of the common errors you might come across while installing Cisco VPN Client in Windows 11.

There may be different reasons for this error but the most common one could be the incompatibility of the files with the OS version, bad sectors on the disk, or damaged registry entries. That’s why our below fixes will do the trick in no time.

What causes the Error 1722 with Windows Installer Package of Acrobat DC?

Error 1722 is a common error message in Windows operating system. It usually occurs when we try to install a software program or driver using the .exe file.

Do note that it also occurs when we try to open some programs, for example, Adobe Acrobat DC. The error message appears as:

It is not a critical error and it only means that the application failed to start correctly, due to some corrupt files or missing files. You can usually correct that by reinstalling the application or the program with which you are trying to open it.

Are there multiple Windows Installer 1722 Error variations?

Windows Installer 1722 Errors in Windows 11 often occur when trying to install, reinstall, or update one of Microsoft’s programs. 

These complications are usually caused by minor issues that can be fixed in a few minutes. Here are some of the main variations that you may encounter:

Error in Application: Windows Installer Error 1722

Windows Installer Error 1722 is not a valid Win32 application

Windows Installer Error 1722 has encountered a problem and needs to close. We are sorry for the inconvenience.

Windows Installer Error 1722 can’t be located

Windows Installer Error 1722 can’t be found

Error starting program: Windows Installer Error 1722

Windows Installer Error 1722 is not running

Windows Installer Error 1722 quit

Faulty Program Path: Windows Installer Error 1722

It’s important to know how to troubleshoot Error 1722 in order to get things back to normal. In this particular guide, we will help you learn how to bypass this issue. Do not fret!

How can I fix the Error 1722 Windows Installer in Windows 11?

1. Run a PC repairing software

In order to specifically detect the potential errors in your PC, a practical answer that can really solve the error is Restoro.

This Windows repairing tool behaves as a restoring software that will deep scan your PC in order to find issues regarding privacy, crashing applications, broken registry files, or junk files.

Afterward, you will get the Scan Summary and then you’ll be able to visualize and fix every single error in your operating system.

Expert tip:

⇒ Get Restoro

2. Restart your device

In an attempt to quickly resolve this issue, you need to restart your PC. The simplest way to do this is by pressing the power button for a few seconds until the computer turns off. 

When the PC is turned on again, the error should be gone. If it doesn’t work, repeat the process until the error disappears.

3. Use Safe Mode to remove unnecessary programs

To fix Error 1722, you’ll need to open your system in Safe Mode and then remove any unnecessary applications and services from your computer.

If you’re still receiving this error even after performing these steps, try uninstalling the software that is causing the conflict and then reinstall the program again. 

Rest assured that you can certainly find the best uninstaller software that fits your budget and specific needs. Although the guide talks about Windows 10, the software can also be used in Windows 11.

Therefore, if you continue to receive Error 1722 after uninstalling the software, make sure that your antivirus software isn’t blocking the installation, and then try installing the program again.

In that regard, make sure you use one of the best antivirus solutions perfectly compatible with Windows 11 to protect your computer.

4. How to fix Error 1722 using cmd

Windows Installer Error 1722 can occur due to issues with the registry entries or broken files in your Windows 11 PC. Therefore, running the SFC and DISM scans in Command Prompt can help solve the error.

1. Press the Windows Key + R key, then type cmd in the Run dialog box.

2. Press Ctrl + Shift + Enter to open the Command Prompt.

3. Type the following command and then press Enter: DISM /Online /Cleanup-Image /ScanHealth

4. Then, type this command and press Enter: DISM /Online /Cleanup-Image /RestoreHealth

5. Wait for the scan to complete, and then restart your device.

6. Finally, input the following command and hit Enter:sfc /scannow

5. Turn on the Windows Installer 6. Unregister and re-register the Windows Installer

Press the Windows key + R key to open the Run command dialog box.

Type cmd and then press Ctrl + Shift + Enter to open the Command Prompt.

To temporarily unregister the Windows Installer, type the following command and press Enter:msiexec /unreg

When this process is complete, you can now re-register the Windows Installer. To do this, type the following command and hit Enter:msiexec /regserver

Finally, restart your device to save these changes.

7. Enable Windows Script Host

REG DELETE /“HKCUSOFTWAREMicrosoftWindows Script HostSettings” /v Enabled /f

REG DELETE /“HKLMSOFTWAREMicrosoftWindows Script HostSettings” /v Enabled /f

8. Perform a system restore Can resetting an application resolve the Windows Installer 1722 Error?

Error 1722. There is a problem with this Windows Installer package. A program required for this install to complete could not be run.

This error message is usually caused by a corrupted file in the installer program, but there are also instances where the problem lies elsewhere. If you’re receiving Error 1722, try resetting your application, then installing it again.

Flight Simulator X installation Error 1722 is one that can occasionally occur as well. Take a look at our detailed guide on Flight Simulator X Error 1722 to resolve the issue and forget all about this error message: 

Still experiencing issues?

Was this page helpful?

x

Start a conversation

You're reading Error 1722: How To Fix This Windows Installer Package Issue

Fix: Windows Installer Error 0X80300002

FIX: Windows Installer error 0x80300002

795

Share

X

Windows Installer errors can be quite serious since they can prevent your OS from installing software.

One good example of such an error is Windows Installer error 0x80300002.

For more similar guides, you should know that we have a dedicated Windows 10 Installer Errors Hub.

Further fixes can be found by accessing our Windows 10 errors page.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

So you’ve got the Windows Installer Error 0x80300002. That means that the system cannot be installed on the partition you indicated because there is something wrong with the partition or the media you’re installing the system from.

If you got the 0x80300002 error, you probably see this on your screen: We couldn’t install Windows in the location you choose. Please check your media drive. Here’s more info about what happened: 0x80300002.

Sounds serious and complicated but don’t panic. The computer can feel your panic and use it against you. Of course not! We will fix this together in no time.

How can I fix Windows Installer Error 0x80300002? 1. Check the media

The first thing you need to check is the media from which you are installing the Windows system. If you are doing it from a bootable DVD, a scratch, or just an old disk could be the smoking gun here.

A more subtle approach would be to check if there are any compatibility issues between the media and the BIOS.

If you are installing Windows 10 from an external HDD or SDD, and that is based on GPT (GUID Partition Table), then your BIOS should be set on UEFI and if the media is based on MBR (Master Boot Record), your BIOS has to be set on Legacy.

Sounds complicated but if you don’t know either of them, the most simple way to fix it is by toggling your BIOS boot mode. You will find the option in the Boot section.

Entering BIOS seems too complicated? Check out this guide for more information.

2. Create another bootable drive

Insert a working USB drive.

Open Command Prompt by pressing the

Windows

Button + R, then type cmd.

When the new window opens type diskpart to run the disk partitioning tool.

In the new window type list disk to find all the drives on your computer and the external media.

Of course, the point of this is for you to identify the correct drive.

Type disk X (where X is the correct number of the drive) to select it and then enter clean to erase all the configuration information and data from the drive.

To create another partition on the drive type create part pri, then select part 1 to select it.

The next step is to format it, so enter the command format fs=ntfs quick.

To activate the newly formatted partition type active.

Presuming that you have the image for Windows 10 ready, save it to the root of the USB storage device.

If you need any additional info on how you can create a Windows 10 UEFI bootable USB, follow the simple steps from this handy guide.

3. Recreate all partitions

If nothing you’ve read until now worked, you will need to start from scratch and that means recreating all the partitions again. Don’t worry because it’s not so complicated.

Just restart the installation until you find the part where the system asks you where to install Windows (Where do you want to install Windows?).

There you will have the options to delete the partitions and that’s what you need to do. Delete all the partitions, then use the New button to create fresh partitions.

You only need one primary partition to install the new system so you don’t need to get too deep in creating the others. You can do that after you successfully install the new system.

Was this page helpful?

x

Start a conversation

Apex Directx Error: Fix This Issue With 4 Simple Methods

Apex Directx Error: Fix This Issue With 4 Simple Methods Updating the graphics card drivers is a practical solution

762

Share

X

The Apex Directx error affects many users and may indicate that your drivers are outdated. 

Disabling the firewall may help, and as a last resort, you may reinstall Origin. 

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

Apex Legends DirectX error can prevent you from starting the game, and in today’s article, we’ll show you how to fix this problem once and for all.

The game has been out for a while now, and EA’s new battle royale game has become a little phenomenon in its own right, with 50 million players in its first month. That’s something to write home about.

Let’s take about possible triggers and solutions.

What causes Apex Directx error?

From the feedback from multiple users, we have been able to sum up the principal triggers for this error to include the following two elements:

Outdated drivers – In most instances, this refers to the graphics driver. If it is bad or outdated you may experience this error.

Firewall or antivirus – Some antivirus apps are notorious for blocking out essential components. You may need to disable your antivirus.

While there may be some other minor triggers, you should be concerned about the above listed. So let us explore practical solutions for Apex legends DirectX 11 and 12 errors.

How can I fix Apex Legends DirectX error? 1. Directx .cab file removal 2. Turn off your firewall

For some users, this simple solution might work. However, keep in mind that turning off your firewall may not solve Apex Legends DirectX errors for all the gamers out there.

So, here are the steps to follow:

3. Run CCleaner

CCleaner is a handy tool that removes any unnecessary files left over from apps and programs that weren’t completely installed. This tool cleans your Windows Registry.

All you need to do is download CCleaner from the official website, install it on your PC and run it.

4. Update your graphics driver

Another common cause for DirectX errors is outdated graphics drivers. Make sure you installed the latest GPU drivers for Apex Legends.

Alternatively, you may go to your GPU manufacturer’s official website and download the available graphics driver updates.

These solutions should help you when you face this Apex DirectX error. In some extreme cases, you may have to uninstall Origin. Usually, this is a last resort solution, but it may help you to solve this problem.

Was this page helpful?

x

Start a conversation

How To Fix “Windows Cannot Be Installed To This Disk” Error

“Windows Cannot Be Installed to This Disk” is one of the most irritating errors one could ever encounter while installing Windows on a hard drive. Notably, there could be several causes of this error. But fortunately, there are some workarounds to eliminate the “Windows Cannot Be Installed to This Disk” error, and we’ve all of them with us.

If you’re also getting the same error when trying to install Windows on your storage drive, read this troubleshooting guide until the end, as we’ve shared all the true and tested workarounds in it. So read ahead and fix the “Windows Cannot Be Installed to This Disk” error with ease.

What Are the Types Of “Windows Cannot Be Installed to This Disk” Error?

Here are some of the most common types of “Windows Cannot Be Installed to This Disk” errors users are getting when trying to install Windows:

Windows Cannot Be Installed to This Disk

The Selected Disk Is of the GPT Partition Style

Selected Disk Has an MBR Partition Table

This Computer’s Hardware May Not Support Booting to This Disk

Windows Cannot Be Installed to This Disk GPT

Windows Cannot Be Installed to This Disk the Disk May Fail Soon

Windows Must Be Installed to an NTFS Partition

Windows Cannot Be Installed on Dynamic Disk

Windows Cannot Be Installed to This MBR Disk

Why Is the “Windows Cannot Be Installed to This Disk” Error Appearing?

The “Windows Cannot Be Installed to This Disk” error usually appears when the hard drive partition style doesn’t support your BIOS. If you don’t know, there are basically two versions of BIOS: Legacy and Unified Extensible Firmware Interface (UEFI). UEFI is a modern version of BIOS.

Whereas Legacy is an older version of BIOS that doesn’t support Windows installation. So, if your system’s BIOS mode is set to Legacy, you can’t install Windows on it.

The below-mentioned ones could also be the reason for this error and other errors:

Enabled Hard Disk Protection

Disk Errors

Enabled UEFI Boot

Unnecessary Boot Devices in BIOS

Enabled AHCI Mode

Switched On EFI Boot Sources

Incorrect SATA Controller Mode Settings

Problem With Your BIOS Settings

Fix the “Windows Cannot Be Installed to This Disk” Error

Here are some working workarounds to get rid of the “Windows Cannot Be Installed to This Disk” error:

1. Confirm If Your PC Supports UEFI

Before moving to the workarounds, we’ve a quick suggestion to make. We first suggest you check if your system comes with UEFI support. Simply put, you need to check whether your system’s hard disk can install Windows. We can’t list the steps to do so, as it varies from OEM to OEM. But it’s worth stating that you can check the same in the Boot tab of BIOS.

Once you’ve moved to the Boot tab, check if your Boot Mode is set to UEFI Mode. If yes, then it means your system can install the Windows system. But something else is stopping it from installing. In that case, try other fixes to fix the “Windows Cannot Be Installed to This Disk” error.

In case the Boot Mode is set to Legacy, you can’t install Windows on it. You need to convert your GPT disk into an MBR disk to install it. You can check the next workaround to do the same.

2. Convert Your GPT Disk to MBR

If your system’s Boot Mode is set to Legacy, you’ve to convert your GPT disk to an MBR disk. You can do the same using Command Prompt and Disk Management, and this section explains the same:

Use Command Prompt

You can check the below steps to convert your GPT disk to an MBR disk using Command Prompt:

1. Press the Windows key to open the Windows Search Box, and type Command Prompt in it.

3. Once the console is opened, type list disk in it and press the Enter key to execute it. Also, make sure to enable the Diskpart utility before that by running the diskpart command.

4. Type select disk 1 in the console. Also, make sure to replace the “1” with your GPT disk’s serial number mentioned in the table that appeared after executing the previous command.

5. After that, type the clean command in the console to remove everything from the selected GPT disk.

6. Lastly, copy-paste convert MBR in the CMD and press Enter to convert the chosen GPT disk to MBR.

Using the Windows Disk Management Utility

Below are the steps to turn your GPT disk into an MBR disk using the Disk Management utility:

1. Open the Control Panel on your system and proceed to the System and Security section.

After converting your GPT disk to an MBR disk, check if you can install Windows.

Use a Third-Party Tool

You can also convert your GPT disk to an MBR disk using a third-party disk management tool. There are plenty of disk management tools that let you do so with ease. So, if the above methods seem difficult to you or doesn’t work, do the same with third-party software.

3. Make the Partition Active

It could be possible that the partition you’re using to install Windows isn’t active; thus, this error appears. In that case, we suggest you make that particular partition active and check if it improves the situation. Follow the below steps, as they  demonstrate the same:

1. Press the Windows key on your keyboard to open the search box and type Command Prompt in it.

3. Once the Command Prompt is opened with admin rights and type the diskpart command in it to activate the utility.

4. After that, execute the list disk command in the console to view all your connected hard drives and their partitions.

5. Type select disk 0 in Command Prompt and press the Enter key to execute the command.

Note: You need to now replace “0” with the hard drive digit you want to activate.

6. Once done, copy-paste list partition into the Command Prompt and press the Enter key.

7. Type the select partition 0 command in the console and replace “0” with the partition’s digit you want to activate.

8. Type active in the Command Prompt utility to activate the selected partition.

4. Make Sure That No Additional Hard Drives Are Connected to the PC

One of the reasons for getting the “Windows Cannot Be Installed to This Disk” error is the additional hard drives connected to the system. In that case, we suggest you disconnect all additional drives, such as USB flash drives, SD cards, etc., on which you aren’t going to install Windows.

Fix the “Selected Disk Has an MBR Partition Table” Error

Below are some working solutions to resolve the “Windows Cannot Be Installed to This Disk” error message:

1. Try Disabling EFI Boot Sources

One of the workarounds to get rid of the “Windows Cannot Be Installed to This Disk” error is to disable the EFI boot sources option in your system’s BIOS. Doing so will allow you to install Windows on your GPT disk without such issues. So, follow the below steps to turn off EFI boot sources in your system’s BIOS:

1. Press the Windows + I shortcut to open the Settings app and navigate to the Recovery section.

5. On the UEFI Firmware Settings screen, move to the Boot Order section and search for EFI boot sources.

6. Lastly, switch off the EFI boot sources option, exit BIOS, and try installing Windows again on your drive.

If disabling the EFI boot sources option in BIOS doesn’t help you install Windows, then you’ll have to convert your disk. You need to convert your disk from MBR to GPT. Also, make sure to re-enable the EFI boot sources option before doing so.

2. Convert From MBR to GPT Using the Command Prompt

If disabling the EFI boot sources in BIOS doesn’t eliminate the error, you need to convert your MBR disk to a GPT disk. You can easily do the same using the Command Prompt utility. We’ve explained the process to do the same in the below-mentioned instructions:

1. Press the Windows key to open search, type Command Prompt in it, and select it from the results.

2. Type diskpart in it, press Enter, and then execute the list disk command to view all the existing disks.

3. You need to now select the disk that you want to convert to GPT. So, type select disk 0 in the console. Make sure to replace “0” with the digit of the disk that you want to convert to GPT.

4. Once done, type clean in the console to clean the partition and then convert gpt to convert it into GPT.

Fix the “This Computer’s Hardware May Not Support Booting to This Disk“ Error

Try these iterations to resolve the “This Computer’s Hardware May Not Support Booting to This Disk” error:

1. Disable Write Protection

Due to this, we suggest you disable write protection on your drive and check the issue’s status. You can follow the below-mentioned instructions to disable it on your system:

1. Open Command Prompt on your Windows system with administrative rights.

2. Copy-paste the below-mentioned command into Command Prompt and press Enter.

diskpart

3. Type list disk in the same Command Prompt and press the Enter key to execute the listed command.

4. After that, copy-paste the below-mentioned command into the Command Prompt and press Enter.

select disk d

Note: Please replace “d” with the letter of the hard drive you’re trying to disable write protection on.

5. Execute the below-mentioned command in the console to remove the read-only permission.

attributes disk clear readonly

After performing the above instructions, try installing Windows again to check whether the issue is fixed.

2. Configure the SATA Controller Mode

If switching off the write protection on your hard drive does eliminate the error, then it could be possible that your SATA Controller mode settings in BIOS are improperly configured.

In that case, we suggest you set the SATA Emulator option to the AHCI Mode. We’ve mentioned the instructions to make this exact change using Registry Editor below with ease:

1. Use the Windows + R keyboard shortcut to open the Run utility, type regedit, and press the Enter key.

2. Once the Registry Editor is opened, go to the below-mentioned location:

HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorV HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorAV

6. Navigate to the HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services storahci path.

7. Double press on the Start key in the right panel, add 0 in the Value data: field, and press the Enter key.

8. After doing so, boot your system in BIOS and move to the UEFI Firmware Settings section. You can check Fix 3 (Steps 1 – 4) to enter your system’s BIOS and do the same.

9. Once you’ve moved there, look for the SATA or SATA Mode Selection option and set it to AHCI.

10. Lastly, exit BIOS and reboot your system normally and let the SATA drivers be installed. Once done, check if the error is gone.

3. Connect Your DVD Drive to the Motherboard

This error sometimes also appears when you connect your SSD and DVD to the controller. Due to this, we suggest you connect your DVD drive to your motherboard and the SSD with to system’s controller. Luckily, this has fixed the issue for some users. So, try the same with your SSD and DVD.

4. Turn Off Intel Boot Security

Some users said that disabling Intel Boot Security in BIOS can also help fix the error. Due to this, we suggest you disable the above option in your system’s BIOS. We’ve mentioned the instructions to turn off Intel Boot Security below:

1. You need to first enter your system’s BIOS mode and navigate to the Secure Boot section.

2. In the Secure Boot section, search for Intel Boot Security and disable the toggle.

5. Connect Your Hard Drive to Intel SATA 3 Port Instead of Marvell Port

Another fix to get rid of the “This Computer’s Hardware May Not Support Booting to This Disk” error is to connect your hard drive to an Intel SATA 3 port instead of a Marvell port. You can do this in the UEFI Firmware Settings section in your PC’s BIOS.

6. Turn Off All Unnecessary Boot Devices in BIOS

Some users said that disabling all the unnecessary boot devices in the system’s BIOS can also resolve the “This Computer’s Hardware May Not Support Booting to This Disk” error.

So, try disabling all unnecessary boot devices and check the issue’s status. Follow the below-mentioned instructions to disable all unnecessary boot devices:

1. You need to first enter your PC’s or laptop’s BIOS and navigate to the Boot section of it.

2. In the Boot section, you’ll see all the boot devices in the Boot Options Priorities section.

3. Lastly, disable all the enabled unnecessary boot devices using your keyboard’s arrow keys.

Fix the “Windows Cannot Be Installed to This Disk. The Disk May Fail Soon” Error

Below are some fixes to fix the “Windows Cannot Be Installed to This Disk. The Disk May Fail Soon” error:

1. Run CHKDSK Scan

If you’re getting the “Windows Cannot Be Installed to This Disk the Disk May Fail Soon” error, then they may be appearing because of some errors in your storage drive.

In that case, we suggest running a CHKDSK scan on your system to see if the drive has some errors causing this error. So check the below steps to execute a CHKDSK scan on your PC:

2. Once the Terminal is opened, copy-paste the below-mentioned command into the console and press Enter.

Note: Please make sure to replace “f” with the letter of the hard drive you want to scan for errors and issues.

chkdsk /F

3. Press the Y key on your keyboard to schedule the CHKDSK scan on the next system start.

4. Use the Alt + F4 keyboard shortcut to open the Shut Down Windows prompt and select Restart from it.

5. You’ll now see that the Windows system is restarting, and the CHKDSK scan has also started.

6. Once the CHKDSK scan completes, your system will restart and report all the errors. In case it finds some errors, you can try searching for them online and repairing them.

2. Try Replacing Your Hard Drive

If the error still appears while installing Windows, we suggest you replace your hard drive. You can try installing Windows on another hard drive to see if it eliminates the error. Also, this workaround has been suggested by Microsoft. So, try the same and see if it works.

Fix the “The Partition Contains One or More Dynamic Volumes That Are Not Supported for Installation” Error

You can follow the listed fixes to eliminate the “The Partition Contains One or More Dynamic Volumes That Are Not Supported for Installation” error while installing Windows.

1. Convert Your Dynamic Disk to a Basic Disk

If you’re getting the “The Partition Contains One or More Dynamic Volumes That Are Not Supported for Installation” error, then you need to convert your dynamic disk to a basic disk. We’ve explained the procedure to convert your dynamic hard disk to a basic disk below:

1. Use the Windows + S shortcut to open search and type Create and format hard disk partitions in it.

5. Follow the on-screen instructions to complete the conversion process and install Windows.

2. Clean the Entire Storage Drive

Another possible solution to fix the above-mentioned error is to clear the hard entire storage drive on which you’re trying to install Windows. Before doing this, make sure to take a backup of your hard drive’s data. Once done, check the below instructions to clean your entire hard drive:

1. Open the Settings app using the Windows + I shortcut and move to the Recovery section.

3. Select the Cloud download option on the How would you like to reinstall Windows? prompt.

4. Now, continue following the on-screen prompts until you reach the Additional settings window.

6. Once done, continue following the on-screen instructions to delete all the existing partitions or volumes and let the system create a new partition to install Windows on it.

Fix the “Windows Cannot Be Installed to This MBR Disk“ Error

Below are some tested fixes to get rid of the “Windows Cannot Be Installed to This MBR Disk” error:

1. Delete All Partitions & Create a New One

If you’re getting the “Windows Cannot Be Installed to This MBR Disk” error message when installing Windows, we suggest you delete all the existing partitions during the Windows installation process and create a new GPT-style partition.

This will eliminate the error, as it has for many Windows users. You can check the below-listed steps to do the same:

1. Start the Windows installation process and keep following it until you see the Which type of installation do you want? prompt.

Doing so will create a new GPT-style partition, and the new Windows will automatically install on it. You can now follow the on-screen steps to install Windows without such errors.

2. Use a 2.0 Flash Drive for Windows Installation

If you’re using an external hard drive to install Windows in the system’s drive and getting this error, then we suggest you utilize a 2.0 flash drive for the installation purpose. Doing so will allow you to boot your system in the Legacy mode.

As a result, you won’t get any errors again and be able to install Windows. In addition, using a 2.0 external flash drive is much more efficient for Windows installation. So, try the same and check the issue’s status.

FAQs

How To Fix Windows Cannot Be Installed to This Disk Using CMD?

In order to eliminate the “Windows Cannot Be Installed to This Disk” error message, you need to convert your GPT disk to an MBR disk using CMD.

How Do I Fix a GPT Partition Error?

In order to fix the GPT partition error, you must make sure that Windows can be installed on the partition. You can also try running the CHKDSK scan on your system to repair all the errors with your drive.

Why Windows 10 Is Not Installing in GPT Partition?

If you can’t install Windows 10 on your GPT partition, it could be possible that you may have disabled UEFI in your system’s BIOS. To install Windows in the GPT partition, you must enable UEFI in your BIOS.

How To Change GPT to MBR?

One of the most common methods to convert your GPT disk to an MBR disk is using the Disk Management utility. You can also use the Diskpart utility in the Command Prompt utility to do so.

How To Repair Disk Using CMD?

You need to execute the CHKDSK scan to repair your hard disk using the Command Prompt program.

Final Words

“Windows Cannot Be Installed to This Disk” is one of the most prevalent and irritating Windows installation errors. But fortunately, there are already some workarounds available to easily eliminate this error.

In case you were also encountering the same error while installing Windows on your system’s hard drive, then we hope the workarounds we shared in this guide helped you get rid of it. If the mentioned workarounds helped you resolve the “Windows Cannot Be Installed to This Disk” error, then do let us know which of the workarounds did so.

Pc Won’t Accept Ram? Here’s How To Fix This Issue

PC won’t accept RAM? Here’s how to fix this issue

216

Share

X

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

Do you have a Windows desktop or laptop that isn’t accepting, or recognizing, its full amount of RAM? For example, Windows 10 Pro might only utilize 4 GB RAM on a 16 GB desktop. If that’s the case, your system resources will be considerably reduced. There are a few reasons why a system’s RAM usage might be somewhat less than what it could be. That could be due to the platform, motherboard or even a setting restricting RAM allocation.

Here’s what to do if your PC won’t recognize RAM Windows OS RAM Limits

The first thing to note is that different Windows editions have varying RAM limits. However, all 32-bit Windows 10, 8 and 7 editions are limited to 4 GB RAM whether they be Enterprise, Pro, Ultimate, etc. So if you add more RAM to a 32-bit Windows OS, the platform isn’t going to accept it. This is how you can check 32 and 64-bit platform details in Windows 10.

Press the Cortana button on the taskbar.

Enter the keyword ‘system’ in the search box.

Select to open the System tab shown in the snapshot directly below.

Windows 10 users can also select About your PC to open further OS details as below.

The listed system type specification tells you whether your platform is 32 or 64-bit. Also note the Installed RAM spec that highlights the usable RAM amount.

You’ll need to upgrade a 32-bit platform to a 64-bit OS to ensure that all your system’s RAM is accepted. A 64-bit Windows 10 or 8 upgrade will ensure at least 128 GB RAM is accepted. The Pro edition of Win 10 supports up to 2 TB (terabytes) of RAM. Note that your desktop or laptop will also need to 64-bit CPU to upgrade to a 64-bit OS.

The 64-bit Windows 7 platforms have lower RAM limits. The 64-bit Windows 7 Basic accepts 8 GB RAM only. You can add up to 16 GB RAM to Win 7 Premium.

Motherboard RAM Restrictions

Aside from Windows, your desktop’s motherboard also has RAM restrictions. A motherboard only supports so much RAM. If you add more RAM to a desktop than the motherboard supports, Windows isn’t going to utilize the surplus amount.

RAM Compatibility

If you’ve installed an extra RAM module, and Windows isn’t accepting it, the module might not be compatible with the motherboard. There are various types of RAM that include: DDR, DDR2, DDR3, DDR4 and SDR. For example, a DDR2 motherboard won’t be compatible with a DDR4 RAM module. To determine RAM compatibility, check out this web tool with which you can find compatible upgrades. If you find the RAM isn’t compatible, remove the module and return it to the vendor for a replacement.

Adjust the Maximum RAM Setting in MSConfig

If Windows doesn’t recognize all your PC’s RAM even for a 64-bit platform, it might be the case that the Maximum memory setting is restricting RAM. You can configure that setting in MSConfig by pressing the Windows key + R hotkey and entering ‘msconfig’ in Run’s text box.

Press the OK button to open the MSConfig window in the snapshot below.

Select the Boot tab on the System Configuration window.

Press the Advanced options button to open BOOT Advanced Options as shown below.

Deselect the Maximum memory option there if it’s selected.

Press the Apply button, and restart the Windows OS.

Maybe now Windows will recognize all your laptop’s or desktop’s RAM. Just make sure you check your Windows and motherboard system specifications before adding another RAM module to a desktop.

RELATED STORIES TO CHECK OUT:

Was this page helpful?

x

Start a conversation

How To Fix Windows Mail App Error 0X8007139F.

If you have recently updated from Windows 10 version 1709 to 1803 (April Update) and are trying to set up a new email account but are receiving error 0x8007139f, this guide will show you how to fix the issue and get the mail app working normally again.

How to Filter and Hide Unwanted Content on Facebook.

The Windows 10 Mail app is probably the most useful of the preinstalled default apps on the operating system. It allows you to quickly and easily setup a variety of different email accounts and manage them all from a safe user-friendly location. Although the Mail app usually escapes update bugs, this time around it wasn’t so lucky, with error 0x8007139f making a Mail app appearance.

Anyone familiar with Windows knows Microsoft has a terrible track record when it comes to Windows 10 updates. No major update or even minor update so far has been without some kind of issue, the Windows 10 April update holds strong to this tradition. Although most update issues and errors can be fixed easily there is one major problem identified in the April update that everyone should be aware of and is linked to a previous Windows 10 automatic update error, which caused Error 0x80070002.

When manually updating to Windows 10 version 1803 from an older version stuck with cumulative update error 0x80070002, Windows becomes corrupted beyond repair and requires a fresh install. Although this is in no way related to the mail app issue, it is something I think everyone should be aware of, especially since most people have more than one Windows 10 device in their household. So if you have a computer that has this error message, make sure you make a backup of your system before installing the April Update.

Note: There are many “possible” fixes for cumulative update error 0x80070002, however, none of them are guaranteed to work. The magic fix was thought to be manually updating to 1803 using the official Microsoft Manual Update Tools.

Getting back on topic, the issue with the Windows Mail app isn’t a serious error and can be fixed by simply toggling a few newly added/rearranged settings in the Privacy menu. For anyone accustomed to using Windows 10 and its fondness for tracking, there is a good chance you have accidentally disabled a setting the mail app needs to function.

How to Fix Windows 10 Mail App Error 0x8007139f.

To begin open the Settings menu go to Privacy, then select Email from the list of options in the left-hand pane. Next, enable Allow Apps to Access Your Email and make sure the Mail and Calendar option below is also enabled. If these options are already enabled when you enter the menu, disable them, Restart your computer, then re-enable them. After your computer restarts, the Windows Mail app will allow you to use the app without error 0x8007139f.

Related: Whilst you are focused on the Windows 10 Mail app why not learn how to disable Notifications and back up emails

How to Disable Notification From the Windows 10 Mail App.

How to Backup Emails in the Windows 10 Mail App.

Update the detailed information about Error 1722: How To Fix This Windows Installer Package Issue on the Minhminhbmm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!