Trending February 2024 # Firmware: Android 4.1 Jelly Bean Update For Samsung Galaxy Chat # Suggested March 2024 # Top 7 Popular

You are reading the article Firmware: Android 4.1 Jelly Bean Update For Samsung Galaxy Chat updated in February 2024 on the website Minhminhbmm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Firmware: Android 4.1 Jelly Bean Update For Samsung Galaxy Chat

Samsung has finally decided to turn their attention to the low-end crop of Galaxy devices – starting today, the official Android 4.1.2 Jelly Bean update has begun rolling out for the Galaxy Chat in Spain, bringing an important update to the chat-centric smartphone.

The Galaxy Chat is the first low-end device by the company that has received a major OS upgrade, at least to my knowledge, which is a great thing and is something other manufacturers would do well to learn from. There’s no official changelog as is often the case with Samsung’s updates, but we can expect the usual Jelly Bean features to make an appearance – faster performance and smoother interface, expandable and actionable notifications, Google Now, better keyboard, resizable widgets, and more.

The update is currently rolling out over the air and via Kies in Spain for unlocked Galaxy Chat, but those that don’t wish to wait and would like to flash the update manually (especially if they are on a custom ROM), we have a step-by-step guide below to help with that.

It can be installed by those not in Spain and those on custom ROMs as well, but remember that if you do so, you might need to wipe all data on the device in order to make it boot after the update. If you aren’t comfortable with that, you should wait for the update to roll out in your country.

Now let’s take a look at how the official Android 4.1.2 firmware can be installed on the Galaxy Chat.

Compatibility

The procedure described below is only for the Samsung Galaxy Chat, model number B5330. Do not try it on any other device.

Warning!

The methods and procedures discussed here are considered risky, so try them out at your own risk, and make sure to read each step carefully before attempting anything. We will not be held responsible if anything goes wrong.

How to Install Android 4.1.2 Jelly Bean on Galaxy Chat

Extract the file downloaded in step 3 on the computer to obtain a file named B5330XXUBMC2_B5330OXABMC2_B5330XXUBMC2_HOME.tar.md5 (the file name may end at .tar, which is normal). This is the actual firmware file that we need to flash on the phone.

Extract the contents of the Odin3_v3.04.zip file to a folder on your computer.

Now, turn off your phone and wait for it to shut down completely.

Then, put the phone into download mode. To do so, press and hold these keys together: Volume Down + OK button + Power till the phone turns on and shows a Warning!! screen. Then press Volume Up to enter download mode.

Important! Connect your phone to PC now. You should get the message “Added !!” under Odin’s message box in the bottom left.

If you don’t get this message, make sure you installed drivers correctly (using Kies or directly) as given in step 2. If it still doesn’t work, try changing to another USB port on the computer and also use the USB ports on the back if you have a desktop PC.

Important! Do not make any other changes in Odin except selecting the required files as given in step 11. Leave all other options as they are. Make sure Re-Partition check box is not selected.

What do if Odin gets stuck or doesn’t do anything: If ODIN gets stuck on setup connection or at any stage of this process after you’ve hit the Start button, and doesn’t seem to be doing anything, or if upon completion of the process you get a FAIL message (with red background) in ODIN, do this: disconnect the phone from the PC, close ODIN, remove battery for 4-5 seconds, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 9.

[Important] What to do if phone doesn’t boot: After you get the PASS message and the phone reboots, the phone might get stuck at the booting animation. If that happens, perform the following steps to make it boot. Remember that these steps will wipe your personal data like contacts, apps, messages, etc. If your phone has already booted, stop reading the guide here, your phone has been updated successfully:

Boot to recovery mode — for which, first power off phone (by removing battery and reinserting it), wait for 5-6 seconds, and then press and hold Home + Volume Up + Power keys together till the screen turns on, then let them go to boot into recovery. Once you are in recovery mode, use volume keys to move the selection up and down and home/power key to select the option.

Go to Wipe data/Factory Reset and select it. Select Yes on next screen.

Then, select reboot system now to reboot the phone, which will now boot properly.

If you run into any roadblocks while flashing the firmware, let us know and we’ll help you out.

You're reading Firmware: Android 4.1 Jelly Bean Update For Samsung Galaxy Chat

Samsung Galaxy Note Gets Another Jelly Bean Firmware Leaked — Xxlsa

Here we go again. As we move towards the end of this rather eventful year, we get closer and closer to the imminent release of the Android 4.1 update for the Galaxy Note, something which Samsung has promised before the next year begins. A couple of Android 4.1 firmware have leaked for the Note before, and now an Android 4.1.2 firmware is out in the wild, which we already glimpsed in a video a few days back.

The new firmware has the build number XXLSA and brings quite a lot of new features and changes. The most important of those is the multi-window multitasking feature from the Galaxy Note 2, and also the ability to customize the toggles in the notifications menu (another Note 2 feature), showing that Samsung is working hard on making sure that newer software features get ported back to older devices as well.

The following changes have been noticed in the firmware till now:

All in all much faster and smoother

New menu when plugging in headphone

Telephone-App and Contacts-App now open much faster then ever before!

Scrolling in browser much better and faster

XXLSA is looking to be quite a stable and much improved firmware compared to the previous one, and XDA Recognized Contributor eybee1970 has released a rooted version of the firmware that can be flashed from a custom recovery, so that all the flashaholics can try out the official Android 4.1.2 build on their Galaxy Note 2.

Do remember that this is a leaked firmware, and hence may not be fully stable and good enough for daily usage, and if you don’t want to test out beta software, you should wait for the official update to start rolling out.

A full step-by-step guide on how the ROM can be installed is waiting below.

Compatibility

The procedure described below is only for the Samsung Galaxy Note, model number N7000. Do not try it on any other device, not even on another model of the same device.

Warning!

The methods and procedures discussed here are considered risky, so try them out at your own risk, and make sure to read each step carefully before attempting anything. We will not be held responsible if anything goes wrong.

How to Install XXLSA Android 4.1.2 Firmware on Galaxy Note

Part I: Download ROM

Copy the ROM’s file to the internal storage on the phone, without extracting it.

PART II: Flashing Safe Kernel

There is a chance of bricking the phone while flashing a ROM if you are on a stock Android 4.0 kernel, so in this part of the guide we’ll flash a safe kernel so that there is no danger of bricking the phone.

Filename: CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip

DO NOT extract the .tar file (this might show up as a zip file as well, but do not extract it). You need to flash the .tar file using Odin to gain root access and install ClockWorkMod Recovery (CWM) alongside. (If you’re getting a zImage file, it means you’ve extracted the .tar file too! — and that’s not a right thing to do. Use 7-zip to extract.)

Extract the contents of the Odin 1.85.zip file to a folder.

Disconnect your phone if it’s connected to PC, then switch it off.

Now, put the Galaxy Note in Download Mode — press and hold these keys together: Volume Down + Home + Power. A Warning! screen will come up; press Volume Up key to continue to enter Download Mode.

Important! Do not make any other changes in Odin except selecting the required file as given in step 9. Leave all other options as they are.

Connect the camera to PC now. You should get the message “Added !!” under Odin’s message box in the bottom left.

If you don’t get this message, make sure you installed drivers correctly (using Kies or directly) as given in step 1. If it still doesn’t work, try changing to another USB port on the computer and also use the USB ports on the back if you have a desktop PC.

Now, hit the START button to start flashing of CF-Root kernel on your Galaxy Note. When the flashing is complete, your phone will automatically reboot — and when you see the Samsung logo, you can safely unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. What to do if Odin gets stuck: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 8.

[Important] When the phone is rebooting after the kernel flashing is complete, remove the battery on the Note, re-insert it, but DO NOT turn it on yet. Go to the next part of the guide.

Part III: Installing the ROM

In recovery, use the Volume buttons to navigate and the power button to select items.

Select wipe data/factory reset, then select Yes on next screen to confirm. Wait a while till the data wipe is complete.

Select install zip from sdcard, then select choose zip from sdcard. Scroll to the ROM’s file and select it. Confirm installation by selecting Yes on the next screen.

After the installation is complete, select Go back then select reboot system now to reboot the phone and boot up into the XXLSA Android 4.1.2 firmware.

The XXLSA Android 4.1.2 firmware is now installed on your Galaxy Note. Try it out, and if you ever feel the need to go back to a stable Android 4.0 ROM later, follow the guide → here to do that. Do let us know how the new leaked firmware works!

I9300Xxdlh8: Latest Android 4.1 Update For Galaxy S3

With just a day to go before Samsung will supposedly be rolling out the official Jelly Bean Android 4.1 firmware update for the Galaxy S3, another Jelly Bean firmware has leaked for it, having the version number XXDLH8, which indicates Samsung is working very hard at getting the update out as soon as possible.

If you have the T-Mobile Galaxy S3, you can try out its leaked Jelly Bean firmware → here.

With each firmware leak, people have noticed bug fixes and performance improvements, so if you’ve been trying those previous leaked firmware out, you should also try out XXDLH8.

Keep in mind that this is a leaked firmware, so it might have some serious issues or bugs, which might make it unstable for every day use, so you should wait for the official update to come out if you’re not comfortable with manual flashing. But you can still try it out, as you can always flash back to an Android 4.0 firmware later if needed.

Let’s take a look at how the XXDLH8 Jelly Bean Android 4.1 firmware can be installed on the Galaxy S3.

Compatibility

This guide to install Android 4.1 Jelly Bean firmware is compatible only and only with the international Galaxy S3, model number i9300. It’s not compatible with the US variants or any other device. Check your device’s model number in: Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How to Install i9300XXDLH8 Jelly Bean Android 4.1 Firmware on Galaxy S3

Filename: I9300XXDLH8_I9300OXADLH8_I9300XXLH8_BTU.zip

Extract the I9300XXDLH8_I9300OXADLH8_I9300XXLH8_BTU.zip file to obtain the following files:

I9300XXDLH8_I9300OXADLH8_I9300XXLH8_HOME.tar.md5

Note: If you don’t get the Odin3_v3.04.zip file after extraction, you can download it here.

Extract the contents of the Odin3_v3.04.zip file to a folder on your computer. Odin is the software we will be using to flash the firmware on the phone.

Now, turn off your Galaxy S3 and wait for some 5-6 seconds after screen goes off to allow it to shut down completely.

Then, put the phone into download mode. To do so, press and hold these keys together: Volume Down + Home + Power till the screen turns on. Then press Volume Up to enter download mode. You can flash a firmware only from download mode.

If you don’t get this message, make sure you installed drivers correctly (using Kies or directly) as given in step 1. If it still doesn’t work, try changing to another USB port on the computer and also use the USB ports on the back if you have a desktop PC.

Important! Do not make any other changes in Odin except selecting the required files as given in step 11. Leave all other options as they are. Make sure Re-Partition check box is NOT selected.

What to do if Odin gets stuck or doesn’t do anything: If ODIN: 1) gets stuck on setup connection, or 2) at any stage of this process after you’ve hit the Start button, and doesn’t seem to be doing anything, or 3) if upon completion of the process you get a FAIL message (with red background) in ODIN, then in all these scenarios, do this: disconnect the phone from the PC, close ODIN, remove battery for 4-5 seconds, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 7.

So, perform these steps for doing a Factory Reset:

Boot into 3e recovery mode — turn off the phone by removing and re-inserting the battery, then press and hold Home + Volume Up + Power keys together till you see the Samsung logo, and then let them go of keys to boot into recovery. Once you are in recovery mode, use volume keys to move the selection up and down and home/power key to select the option.

Go to Wipe data/Factory Reset and select it. Select Yes on next screen.

Then, select reboot system now to reboot the phone, which will now restart/boot properly.

Going back to Ice Cream Sandwich: If you wish to go back to an Android 4.0 firmware after flashing the leaked firmware, you can use this guide to do so.

XXDLH8, the latest leaked official Jelly Bean Android 4.1 firmware is now up and running on your Galaxy S3. Do let us know how it works for you and the things you notice in the firmware (like bugs, improvements or new features). Enjoy!

Also try out a few custom Jelly Bean ROMs for the Galaxy S3 → here.

Download Android 4.4.2 Kitkat Update For Samsung Galaxy Tab 3 8.0 Sm

Samsung has started to officially announced the Android 4.4.2 KitKat for the Galaxy Tab 3 8.0 WiFI SM-T310 tablet in the form of OTA update. It’s been almost a year that this tablet witnessed a major Android update, after the release Android 4.2.2 Jelly Bean last year, the device is now set to get the update for 4.4.2 Kitkat. So all you have to do is to check the notification for update or check it from Software update menu in the About device settings of your tablet.

However, this firmware is not globally released as of now and Samsung is slowly pushing it globally starting with France, so this process is going to take few days. But the firmware is now available at Sammobile website, so you can manually update your device to the latest KitKat update just in a few steps. So get the latest features of the Android 4.4.2 KitKat by manually updating your tablet without any further wait for the OTA to arrive.

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

 SAMSUNG GALAXY TAB 3 8.0 OFFICIAL KITKAT 4.4.2 FIRMWARE

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-T310!

Do not use the procedures discussed here on any other variants of Galaxy Tab 3 8.0 or any other device of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Galaxy Tab 3 8.0.

In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Tab 3 8.0 on your computer.

► SAMSUNG GALAXY TAB 3 8.0 DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS   DOWNLOADS

Download the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.

Odin File → download link.

Firmware File → download link.

  STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might delete internal sd card too, your files will remain safe on PC.

Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get the following files:

Odin3 v3.09.exe

Odin3.ini

Extract/Unzip the Firmware zip file on your computer (using 7-zip free software, preferably) to get a tar file.

Move the extracted firmware file in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is)

Disconnect the Galaxy Tab 3 8.0 from PC if it is connected.

Boot your Galaxy Tab 3 8.0  into Download Mode:

Power off your phone first and wait for 6-7 seconds after display is off.

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy Tab 3 8.0 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and re-install back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again.

Load the firmware file (extracted in Step 2) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Tab 3 8.0 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Tab 3 8.0 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Galaxy A7 Firmware Download: Android 9 Pie Available For 2023 Edition

Samsung Galaxy A7 Firmware

Android 9 Pie firmware

Well, expect the Android 9 Pie firmware to be available for the eligible devices sometime in Q2 2023. Which means you might see Android Pie firmware for the Galaxy A7 2023 — the one with the triple camera, yes! — in Q2 2023.

BTW, only the Galaxy A7 2023 is eligible for Android Pie update as all the other older editions of the Galaxy A series have reached the end of major Android OS upgrade support.

Android 8.0 Oreo firmware

Update [June 18, 2023]: The Android 8.0 update is available for the 2023 release of the Galaxy A7, model no. SM-A720. While earlier models released in 2024 (SM-A700) and 2024 (SM-A710) are not expected t received the Oreo OTA update.

Android 8.1 update is not expected for any of the Galaxy A7 handsets.

Galaxy A7 2023

Model Date Free Download Link

SM-A750GN 05 Apr 2023 A750GNDXU2BSC7_A750GNOLM2BSC7_XXV.zip

SM-A750F 18 Sep 2023 A750FXXU1ARII_A750FOJM1ARII_TUR.zip

SM-A750F 17 Sep 2023 A750FXXU1ARIJ_A750FODM1ARIK_INS.zip

‘ Galaxy Note 9 firmware‘

Galaxy A7 2023

Model Date Free Download Link

SM-A720F 16 Jun 2023 A720FZTU3CRD4_A720FZZT3CRD4_BRI.zip

SM-A720F 08 May 2023 A720FXXU3CRE3_A720FODD3CRD9_INS.zip

SM-A720F 07 May 2023 A720FXXU3CRE2_A720FOXY3CRD3_SER.zip

SM-A720F 26 Apr 2023 A720FXXU3CRD3_A720FOXY3CRD3_SER.zip

SM-A720F 13 Apr 2023 A720FXXU3BRD3_A720FODD3BRD2_INS.zip

SM-A720F 14 Jun 2023 A720FXXU3BRB9_A720FOJV3BRB1_TUR.zip

SM-A720F 09 Feb 2023 A720FXXU3BRB6_A720FOXY3BRB6_SER.zip

SM-A720F 07 Dec 2023 A720FXXU2BQL8_A720FOJV2BQL2_TUR.zip

SM-A720F 03 Nov 2023 A720FXXU2BQK2_A720FODD2BQHB_INS.zip

SM-A720F 05 Oct 2023 A720FXXU2BQJ1_A720FUWT2BQJ1_EBE.zip

SM-A720F 22 Sep 2023 A720FXXU2BQI9_A720FOJV2BQI9_TUR.zip

SM-A720F 10 Jul 2023 A720FXXU2AQG5_A720FUUB2AQF1_ALE.zip

SM-A720F 26 Jun 2023 A720FXXU2AQFA_A720FUUB2AQF1_ARO.zip

SM-A720F 23 Jun 2023 A720FXXU2AQF9_A720FODD2AQF9_INS.zip

SM-A720F 09 Jun 2023 A720FXXU1AQF2_A720FOJV1AQF1_AFR.zip

SM-A720F 18 Apr 2023 A720FXXU1AQD5_A720FXSA1AQE1_XSA.zip

SM-A720S 03 May 2023 A720SKSU2BRE1_A720SSKC2BRE1_SKC.zip

SM-A720S 06 Feb 2023 A720SKSU2ARB1_A720SSKC2ARB1_SKC.zip

Galaxy A7 2024

Model Date Free Download Link

SM-A710F 19 Sep 2023 A710FXXU2CQI6_A710FOXY2CQI5_SER.zip

SM-A710F 04 May 2023 A710FXXU2CQE3_A710FOJV2CQE1_TUR.zip

SM-A710F 22 Apr 2023 A710FXXU2CQDC_A710FOXY2CQDC_SER.zip

SM-A710F 06 Apr 2023 A710FXXU2BQD1_A710FOXY2BQD1_CAC.zip

SM-A710F – A710FXXU2BQC8_A710FOJV2BQC3_TUR.zip

SM-A710F 17 Feb 2023 A710FXXU2BQB1_A710FOXY2BQB1_SER.zip

SM-A710F 09 Dec 2024 A710FXXU2BPL3_A710FOJV2BPL1_TUR.zip

SM-A710F 26 Oct 2024 A710FXXU2BPJ8_A710FOXY2BPJ8_SER.zip

SM-A710F 22 Sep 2024 A710FXXU1BPI6_A710FOXY1BPI6_SER.zip

SM-A710F 25 Jul 2024 A710FXXU1BPG6_A710FOJV1BPG1_TUR.zip

SM-A710F 25 Jul 2024 A710FXXU1BPG5_A710FOXY1BPG5_SER.zip

SM-A710F 05 Jul 2024 A710FXXU1BPG2_A710FOJV1BPG1_TUR.zip

SM-A710F 01 Jul 2024 A710FXXU1BPG1_A710FOXY1BPG1_SER.zip

SM-A710F – A710FXXU1APBA_A710FOJV1APB1_TUR.zip

SM-A710F – A710FXXU1APB2_A710FOXY1APB1_SER.zip

SM-A710F 08 Jan 2024 A710FXXU1APA5_A710FOJK1APA2_ILO.zip

SM-A710F – A710FXXU1AOLF_A710FOJV1AOL3_TUR.zip

SM-A710F – A710FXXU1AOLD_A710FOXY1AOLD_SER.zip

SM-A710F – A710FXXU1AOL4_A710FOXY1AOL4_SER.zip

SM-A710FD – A710FXXU2CRE1_A710FDODD2CRE1_INS.zip

SM-A710FD 14 Nov 2023 A710FXXU2CQK2_A710FDOLB2CQK2_XSP.zip

SM-A710FD 14 Nov 2023 A710FXXU2CQK1_A710FDODD2CQK1_INS.zip

SM-A710FD 12 Jul 2023 A710FXXU2CQG4_A710FDODD2CQG2_INS.zip

SM-A710FD 15 May 2023 A710FXXU2CQE6_A710FDOLB2CQE6_XSP.zip

SM-A710FD 13 May 2023 A710FXXU2CQE4_A710FDODD2CQF2_INS.zip

SM-A710FD 24 Mar 2023 A710FXXU2BQC7_A710FDOLB2BQC1_STH.zip

SM-A710FD 07 Mar 2023 A710FXXU2BQC2_A710FDOLB2BQC1_XXV.zip

SM-A710FD 11 Jan 2023 A710FXXU2BQA2_A710FDODD2BQA2_INS.zip

SM-A710FD 25 Oct 2024 A710FXXU2BPJ7_A710FDODD2BQA1_INS.zip

SM-A710FD 07 Oct 2024 A710FXXU2BPJ2_A710FDODD2BPJ2_INS.zip

SM-A710FD 01 Aug 2024 A710FXXU1BPH1_A710FDODD1BPG1_INS.zip

SM-A710FD 20 May 2024 A710FXXU1APE2_A710FDODD1APE2_INS.zip

SM-A710K 07 Dec 2023 A710KKKU1CQL1_A710KKTC1CQL1_KTC.zip

SM-A710K 04 Jan 2023 A710KKKU1BQA4_A710KKTC1BQA4_KTC.zip

SM-A710K 17 Mar 2024 A710KKKU1APC4_A710KKTC1APC4_KTC.zip

SM-A710L 07 Dec 2023 A710LKLU1CQL1_A710LLUC1CQL1_LUC.zip

SM-A710L 04 Jan 2023 A710LKLU1BQA4_A710LLUC1BQA4_LUC.zip

SM-A710L 17 Mar 2024 A710LKLU1APC4_A710LLUC1APC4_LUC.zip

SM-A710M – A710MUBU2CQL3_A710MCHT2CRA1_CHT.zip

SM-A710M 26 Apr 2023 A710MUBU2CQD4_A710MUUB2CQD4_COO.zip

SM-A710M 02 Mar 2023 A710MUBU2BQB2_A710MTFG2BQB1_CHT.zip

SM-A710M 15 Sep 2024 A710MUBU1BPI2_A710MUUB1BPI2_BVO.zip

SM-A710M 03 Aug 2024 A710MUBU1BPH1_A710MUUB1BPH1_BVO.zip

SM-A710M 01 Jul 2024 A710MUBU1BPG1_A710MUUB1BPG1_COO.zip

SM-A710M 24 Jun 2024 A710MUBU1APF9_A710MUWA1APG1_COM.zip

SM-A710M 24 Feb 2024 A710MUBU1APB4_A710MUUB1APB4_COO.zip

SM-A710M 22 Dec 2024 A710MUBU1AOL5_A710MUUB1AOL5_BVO.zip

SM-A710M 16 Dec 2024 A710MUBU1AOL4_A710MUUB1AOL4_TPA.zip

SM-A710M 02 Dec 2024 A710MUBU1AOL1_A710MUUB1AOL1_COO.zip

SM-A710S 07 Dec 2023 A710SKSU1CQL1_A710SSKC1CQL1_SKC.zip

SM-A710S 04 Jan 2023 A710SKSU1BQA4_A710SSKC1BQA4_SKC.zip

SM-A710S 17 Mar 2024 A710SKSU1APC4_A710SSKC1APC4_SKC.zip

SM-A710Y 16 Nov 2023 A710YZTU1BQK2_A710YZZT1BQK2_BRI.zip

SM-A710Y – A710YZTU1APH3_A710YZZT1APH3_BRI.zip

Galaxy A7 2024

Model Date Free Download Link

SM-A700F 05 May 2023 A700FXXU2BQE1_A700FPHE2BQE1_PHE.zip

SM-A700F 24 Apr 2023 A700FXXU2BQD1_A700FOJV2BQD1_MID.zip

SM-A700F 29 Nov 2024 A700FXXU2BPK1_A700FDBT2BQA1_DBT.zip

SM-A700F 21 Oct 2024 A700FXXU2BPJ2_A700FOJV2BPJ3_KSA.zip

SM-A700F 01 Sep 2024 A700FXXU2BPH4_A700FPHE2BPH4_PHE.zip

SM-A700F 08 Aug 2024 A700FXXU2BPH2_A700FOJV2BPH2_XFA.zip

SM-A700F 28 Mar 2024 A700FXXU2BPC5_A700FOXX2BPC1_ROM.zip

SM-A700F 18 Feb 2024 A700FXXU2BPB2_A700FOJV2BPB1_MID.zip

SM-A700F 01 Dec 2024 A700FXXU2BOL1_A700FOJV2BOK2_XFA.zip

SM-A700F 24 Oct 2024 A700FXXU2BOJ6_A700FOJV2BOJ5_KSA.zip

SM-A700F 25 Sep 2024 A700FXXU2BOI6_A700FDBT2BOI1_DBT.zip

SM-A700F 12 Feb 2024 A700FXXU2AOB2_A700FOJV2AOB2_KSA.zip

SM-A700F 06 Dec 2024 A700FXXS2BPL1_A700FOJV2BPH2_XFA.zip

SM-A700FD 10 May 2023 A700FDXXU1CQE3_A700FDODD1CQC6_INS.zip

SM-A700FD 14 Mar 2023 A700FDXXU1CQC3_A700FDOXE1CQD2_CAC.zip

SM-A700FD 21 Oct 2024 A700FDXXU1CPJ3_A700FDOJV1CPJ2_KSA.zip

SM-A700FD 13 Oct 2024 A700FDXXU1CPJ2_A700FDOLC1CPJ2_XSP.zip

SM-A700FD 27 Sep 2024 A700FDXXU1CPI5_A700FDODD1CPI5_INS.zip

SM-A700FD 05 Aug 2024 A700FDXXU1CPH5_A700FDOXE1CPI1_CAC.zip

SM-A700FD 21 Jul 2024 A700FDXXU1CPGG_A700FDOJV1CPGG_KSA.zip

SM-A700FD 01 Jul 2024 A700FDXXU1CPG1_A700FDODD1CPG1_SLK.zip

SM-A700FD 03 Nov 2024 A700FDXXU1BOK1_A700FDOJV1BOK1_KSA.zip

SM-A700FD 31 Oct 2024 A700FDXXU1BOJD_A700FDOXE1BOJD_CAC.zip

SM-A700FD 11 Aug 2024 A700FDXXU1BOH2_A700FDOXE1BOH1_CAC.zip

SM-A700FD 08 Jun 2024 A700FDXXU1AOF1_A700FDOLB1AOF1_XME.zip

SM-A700FD 17 Apr 2023 A700FDXXS1CQD1_A700FDOJV1CPGG_XSG.zip

SM-A700FD 23 May 2024 A700FDDDU1BPE1_A700FDODD1BPE1_INS.zip

SM-A700FD 22 Apr 2024 A700FDDDU1BPD4_A700FDODD1BPD1_INS.zip

SM-A700FD 18 Mar 2024 A700FDDDU1BPC4_A700FDODD1BPC2_INS.zip

SM-A700FD 15 Mar 2024 A700FDDDU1BPC3_A700FDODD1BPC2_INS.zip

SM-A700FD 11 Feb 2024 A700FDDDU1BPB1_A700FDODD1BPB1_SLK.zip

SM-A700FD 27 Jan 2024 A700FDDDU1BPA2_A700FDODD1BPA2_INS.zip

SM-A700FD 11 Nov 2024 A700FDDDU1BOK2_A700FDOLC1BOK1_XSP.zip

SM-A700FD 30 Oct 2024 A700FDDDU1BOJ7_A700FDODD1BOJ7_SLK.zip

SM-A700FD 21 Oct 2024 A700FDDDU1BOJ5_A700FDODD1BOJ5_INS.zip

SM-A700FQ 07 Oct 2024 A700FXXU2BPJ1_A700FTUR2BPJ2_TUR.zip

SM-A700FQ 22 Jun 2024 A700FXXU2BPF2_A700FTUR2BPF1_TUR.zip

SM-A700FQ 18 Apr 2024 A700FXXU2BPD2_A700FTUR2BPD2_TUR.zip

SM-A700H 15 Mar 2023 A700HXXU1CQC1_A700HOXYU1CQC1_CAC.zip

SM-A700H 29 Sep 2024 A700HXXU1CPI3_A700HOJVU1CPI3_THR.zip

SM-A700H 31 Aug 2024 A700HXXU1CPH8_A700HOLB1CPH8_XXV.zip

SM-A700H 03 Aug 2024 A700HXXU1CPH2_A700HOJVU1CPH2_AFR.zip

SM-A700H 25 Jul 2024 A700HXXU1CPG8_A700HOXYU1CPG8_CAC.zip

SM-A700H 24 Feb 2024 A700HXXU1BPB2_A700HOJVU1BPB1_MID.zip

SM-A700H 26 Dec 2024 A700HXXU1BOL3_A700HOLBU1BOL1_XXV.zip

SM-A700H 30 Sep 2024 A700HXXU1BOIA_A700HOJVU1BOI8_MID.zip

SM-A700H 10 Sep 2024 A700HXXU1BOI4_A700HOLBU1BOI4_XXV.zip

SM-A700H 24 Aug 2024 A700HXXU1BOH7_A700HOXYU1BOI1_CAC.zip

SM-A700H 03 Jul 2024 A700HXXU1BOG1_A700HOXYU1BOG1_CAC.zip

SM-A700H 15 Jun 2024 A700HXXU1AOF2_A700HOLB1AOF1_XXV.zip

SM-A700H 23 Apr 2024 A700HXXU1AOD2_A700HOLB1AOD1_XXV.zip

SM-A700H 20 Apr 2024 A700HXXU1AOD1_A700HOJV1AOD3_AFR.zip

SM-A700H 25 Mar 2024 A700HXXU1AOC2_A700HOXY1AOC2_CAC.zip

SM-A700H 14 Jan 2024 A700HXXU1AOA7_A700HOJV1AOA3_THR.zip

SM-A700H 12 Jan 2024 A700HXXU1AOA6_A700HOXY1AOA6_CAC.zip

SM-A700H 09 Jan 2024 A700HXXU1AOA5_A700HOLB1AOA1_XXV.zip

SM-A700H 03 Jan 2024 A700HXXU1AOA3_A700HOXY1AOA3_CAC.zip

SM-A700H 08 Dec 2024 A700HXXS1CPL2_A700HOJVU1CPL1_MID.zip

SM-A700H 05 Dec 2024 A700HXXS1CPL1_A700HOLB1CPH8_XXV.zip

How to download the correct firmware file

This is an important part!

Be sure to check and find the correct model no. of your Galaxy A7. Then, based on your device’s model no., look for the appropriate firmware build from above.

Now that you know the model no., download the latest firmware from above for that model no. exactly.

Next, install the firmware on your Galaxy A7 by following the guide linked right below.

How to install a firmware

First, read our disclaimer, then take backup and then follow the guide below to install the firmware.

Disclaimer: Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and thus you need to be cautious of it. In any case, you only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Backup, backup, backup! Create an appropriate backup of contacts, pictures, videos, songs and other important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have a backup of all your important files. Sometimes, firmware installation may delete everything on your device! Like, when you change the CSC of your device, knowingly or not.

Step-by-step Firmware Installation Guide

Let’s see how to install the firmware on your Galaxy A7. Make sure you have more than 30% battery on your device.

Step 1. Make sure you have downloaded the correct firmware file on your PC. See above for how to download correct firmware file for your Galaxy A7 and download links.

Step 3. Also, download Odin PC software (latest version).

Step 5. Extract the Odin file. You should get the Odin exe file (other files could be hidden, hence not visible).

Step 6. Disconnect your Galaxy A7 from PC if it is connected.

Step 7. Boot into download mode:

Power off your device. Wait for 6-7 seconds after screen goes off.

Press and hold the three buttons Volume down + Home + Power together until you see the Warning screen.

Press Volume Up to continue to download mode.

Step 9. Connect your device now using the USB cable. Odin should recognize your device. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in the bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.

You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.

If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).

You can try different USB ports on your PC too.

Load the firmware files(s) on your device. This depends on how many files you got in step 4 above upon extracting the firmware .zip file.

Case 1: If you got a single .tar/.tar.md5 file, then load this into AP tab of your Odin software. Then go to next step.

Case 2: If you got more than one .tar/.tar.md5 file, then you must be having files starting with AP, CSC, Home_CSC, BL, CP, etc. stuff. In this case, choose the files as follows. Select the firmware files as follows.

About CSC file: Using the HOME_CSC file won’t reset your device, and data on the phone shouldn’t be deleted. However, when we select regular CSC file, and it results in CSC on the device being different than that in CSC file, your phone will be formatted automatically. You can even choose to ignore loading the CSC file, that may do alright too. But if it doesn’t work out, repeat the whole process and select CSC file this time around.

Info: When you load files, Odin checks the md5 of firmware file, which takes time. So, simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size will also show up in Odin.

Go back to Log tab now, as it will show the progress of firmware installation when you hit the start button in next step.

Wait till installation is finished, after which your device will reboot automatically. You’ll get PASS message as shown below upon successful installation from Odin.

Some errors you may run into, and with respective solution.

If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the file and flash it again as said above.

If you get FAIL in the top left box, then also you need to flash the file again as stated just above.

That’s it. Let the device restart automatically.

Firmware Benefits

You can use the firmware for a variety of purposes, which includes:

Fix your Galaxy A7 if it’s giving you force closes errors and restarts randomly.

Unbrick your Galaxy A7 if it’s bootlooping and stuck at logo when restarting.

Go Back to Stock on your Galaxy A7 — helps when looking to sell the device, or fix installing OTA updates if broken.

Restore Galaxy A7 to factory state.

Upgrade your Galaxy A7 to newer Android version.

Downgrade your Galaxy A7 to lower build no. at same Android version.

Unroot your Galaxy A7.

Remove custom recovery like TWRP and CWM, if installed, on your Galaxy A7.

Root Galaxy S2 Running On Xwlpg Android 4.0 Firmware

What’s the one thing most people do after flashing or updating to a new firmware on their devices? That would be rooting the particular firmware. And what follows every new firmware release for Samsung’s Galaxy line of devices? It’s the CF-Root kernel for the firmware by XDA Elite Recognized Developer Chainfire, that lets you root your phone, and also install ClockworkMod recovery on it (so you can flash custom ROMs and mods).

If you’ve updated your Galaxy S2 to the XWLPG Ice Cream Sandwich Android 4.0 firmware and are looking to root it, you can do so by flashing the CF-Root kernel for XWLPG by following the guide below, which will also install ClockworkMod recovery on the phone.

Read on to find out how to root XWLPG firmware on the Galaxy S2 i9100.

Compatibility

This hack and the guide below are compatible only and only with Galaxy S2, model number I9100. It’s not compatible with the I9100G or any other device. Check your device’s model number in: Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How to Root XWLPG Firmware on Galaxy S2 i9100

Make sure you are on the XWLPG Ice Cream Sandwich Android 4.0 firmware available → here.

Filename: CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.zip

DO NOT extract the .tar file (this might show up as a zip file as well, but do not extract it). You need to flash the .tar file using Odin to gain root access and install ClockworkMod Recovery (CWM) alongside. (If you’re getting a zImage file, it means you’ve extracted the .tar file too! — and that’s not a right thing to do.)

Extract the contents of the Odin 1.85.zip file to a folder.

Disconnect your phone if it’s connected to PC, then switch it off.

Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume Down + Home + Power. A Warning! screen will come up; press Volume Up key to continue to enter Download Mode.

Important! Do not make any other changes in Odin except selecting the required files as given in step 10. Leave all other options as they are.

If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed (check step 1). Also, uninstall Kies from the Control Panel as well (this will leave the drivers on the computer but remove Kies which can interfere with the procedure).

Now, hit the START button to start flashing CF-Root kernel. When the flashing is complete, your phone will automatically reboot — and when you see the Samsung logo, you can safely unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. What to do if Odin gets stuck: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 9.

If you run into any roadblocks while flashing the kernel, let us know and we’ll help you out.

Your phone is now rooted and CWM recovery has been installed on it, with CF-Root kernel. Using all those favourite root-enabled apps of yours is now possible. Enjoy!

Update the detailed information about Firmware: Android 4.1 Jelly Bean Update For Samsung Galaxy Chat on the Minhminhbmm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!