Trending December 2023 # How To Cut Down On Your Drivers’ Idle Times # Suggested January 2024 # Top 15 Popular

You are reading the article How To Cut Down On Your Drivers’ Idle Times updated in December 2023 on the website Minhminhbmm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Cut Down On Your Drivers’ Idle Times

There are various reasons why trucks may idle, such as the driver being stopped in traffic, sleeping while on a long haul, and unloading the vehicle.

Excessive idling not only wastes money in fuel and maintenance costs, but is also bad for the environment.

GPS fleet management software offers numerous ways to reduce your fleet’s idle time.

This article is for fleet managers and business owners with a fleet of company vehicles who want to reduce their drivers’ idle time, by choosing a fleet management solution.

Idling commercial vehicles drain a company’s financial resources, particularly since fuel costs make up 60% of most fleet budgets. This will continue to be an issue as fuel costs rise and environmental concerns about air pollution and global warming become more prevalent. To address these issues, fleet managers must find ways to reduce their company vehicles’ idle time. One solution is to use telematics and fleet management software. Before you can determine how to cut down on idling, you should understand exactly what idle time is and its downsides.

What is idle time?

Idling is when a vehicle is on but not moving. All drivers have some have idle time, such as when they reach stop signs or stoplights. However, different types of fleets face many other instances of idling. For example, long-haul fleet drivers will have higher idle times than truck and delivery drivers who work local routes.

For example, idling occurs when drivers are:

At toll booths

Stuck in traffic

Loading and unloading the truck

Preparing and processing documents

Warming up the engine and cab before departure

Stopping the truck to use the phone

At a rest stop

Did You Know?

The U.S. Office of Energy Efficiency and Renewable Energy (EERE) reports that 34% of vehicles idle for less than one hour per day, 39% idle for three to four hours, and 14% idle for more than four hours per day.

As the business owner or fleet manager, you must accommodate the health and well-being of your drivers, which is why some idling is hard to avoid. Drivers must make rest stops along the way to support their comfort and to meet hours of service (HOS) rules. Some drivers spend nights in their vehicles on long-haul deliveries and need to keep their trucks running to stay warm. During their downtime, drivers will go online, watch TV, listen to the radio, and call their families. These aspects of downtime are essential for long-haul drivers’ physical, mental and emotional health.

Editor’s note: Looking for the right GPS fleet management software for your business? Fill out the below questionnaire to have our vendor partners contact you about your needs.

What is the impact of excessive idle time?

In the EERE study we cited above, more than half of the fleet vehicles idled at least three hours per day, with some idling up to eight hours per day. Excessive idling can cost approximately $12,000 per fleet truck per year. Every 10% of idle time can result in a 1% decline in the truck’s fuel economy.

Excessive idle time can have other costs in addition to wasted fuel:

Running costs

Commercial trucks cost about $70,000 in annual fuel costs. Idling the truck for 10 seconds uses more fuel than restarting the engine. In fact, idling uses about 8% of the truck’s fuel. Across an entire fleet, fuel costs related to idling add up to a significant expense for a business.

Additional maintenance costs

The Environmental Protection Agency (EPA) has determined that excessive idling can increase a company’s annual maintenance costs by approximately $2,000 per truck. With more frequent maintenance, trucks are out of service more often and for longer periods. Idling is twice as damaging to the truck’s internal components as turning the engine on and off. Idling also decreases the time required between oil changes.

Environmental and health costs

Idling trucks are a source of carbon dioxide (CO2) emissions, which hurts the environment. According to the EPA, the transportation industry is responsible for 28% of all greenhouse gas emissions (including CO2) in the United States. The EPA recognizes greenhouse gas emissions as responsible for warming Earth’s atmosphere, leading to widespread climate change.

Idling trucks also lower the air quality for drivers and the general public. Studies from the University of Michigan’s Lifestage Environmental Exposures and Disease Center have linked the increase in cancer, asthma, and birth defects to vehicle fumes and idling.

Did You Know?

To date, 18 states have instituted anti-idling legislation to help protect public health. Fines for idling can reach $25,000.

Using GPS tracking to monitor and reduce idle time

The best GPS fleet management software and telematics software have multiple features to help fleet managers monitor and manage their vehicles’ idle time.

Driver behavior reports

Telematics software records a lot of data about fleet trucks. This data includes drivers’ actions to operate the vehicles, such as idling, aggressive driving, speeding, braking and cornering. These behaviors affect the vehicles’ performance, fuel consumption, and durability, potentially increasing operational and maintenance costs. For example, speeding and aggressive driving can cause additional wear and tear on vehicle components, reduce fuel efficiency, increase the likelihood of accidents, and affect insurance premiums.

The information from telematics software can help you identify your “problem” drivers. Armed with this information, you could create training programs to address certain behaviors, customizing the training for specific drivers. The software’s reports can also show you which drivers are idling longer than others, so you can notify these drivers or implement an “idle shutdown” program.

Tip

You can use GPS fleet management software to monitor your drivers’ behavior on the road, which can help you train your team to cut down on fuel and maintenance costs. Consider our review of Mojio GPS fleet management, our ClearPathGPS review, and our GPSTrackit review for solutions with idle time monitoring tools.

Telematics software monitors engine diagnostics and tracks idling at the same time. It can alert both you and the driver when a vehicle idles beyond a set time. This should spur the driver to stop the engine, while showing you which drivers are idling longer than others. Ultimately, this should reduce your fleet’s overall idle time and fuel waste.

GPS idle time reports

Electronic logging devices can track how long a truck idles and where it is when it idles. It then produces reports to help you determine the cause of the idling problems and what you or the driver can do to reduce them. For example, you might install an auxiliary unit in company vehicles or implement new idling rules (e.g., drivers must turn off the engine after a certain amount of idling time). You can then continue monitoring driver behavior with the telematics software to ensure that drivers follow the new rules.

Optimized delivery routes

Traffic congestion is another main cause of idle time. You can use telematics software to optimize your drivers’ travel routes to avoid heavy traffic where possible. GPS systems use algorithms to evaluate all possible routes between two points. The telematics software assesses multiple variables when determining the best routes, including current traffic, accidents, and ongoing and pending construction. Drivers can adjust their routes in progress or before they start their trip based on the telematics’ analysis. Reducing drivers’ time in traffic and optimizing their routes will reduce their idle time.

Geofencing

Geofencing involves setting a virtual perimeter around a geographic area in the real world. The technology has numerous applications in many different industries. For example, the city of Fort Lauderdale, Florida, used geofencing to reduce the maintenance of a local bridge. Overweight trucks were constantly crossing this bridge, which resulted in the need for ongoing maintenance. City fleet managers used geofencing to tag all overweight vehicles so that they would receive alerts when those vehicles crossed the bridge. As a result, the number of overweight vehicles using the bridge decreased by 90%.

You can use geofencing to reduce your trucks’ idle time by putting a geofence around common idling areas. When one of your vehicles enters the geofenced area, the telematics software will send you an alert to show how long the vehicle remains in the area.

You're reading How To Cut Down On Your Drivers’ Idle Times

How To Create A Backup Of Your Drivers On Windows 10.

We have to back up just about everything in today’s society, photos, movies, music, documents, you name it. Sadly, a lot of the time, we often forget about the little things, things that take just as much time to recover if they are lost, so why not learn how to create a back up of your Windows system drivers. 

How to Remove the “G” Search From Google Keyboard ‘AKA’ Gboard.

These days Drivers aren’t as painful to track down and install as they used to be, with Windows 10 automatically taking care of the hard work. If you do get stuck and Windows can’t quite figure out a solution, you can always just go to the manufacturer’s website and search for your specific product.

In the future, rather than tracking down the remaining drivers or waiting for Windows to do it for you, you can use Windows Command Prompt to backup drivers installed on your PC. With this done, you can install a fresh copy of Windows, fire up the backup and be done in minutes rather than hours. 

Note: This method will only make a backup of .inf drivers. Any other drivers installed using either .msi or .exe will be skipped. If you have the .msi files or the .exe files make sure to back those files up manually also. The folder will be quite big, my driver backup folder is 1.79gb.

Backing Up Your Windows 10 Drivers Using DISM. (Deployment Image Servicing and Management)

The first thing you need to do is open the Windows 10 File Explorer and create a new folder in which you will store the backup of all your drivers. You can place it anywhere you like, just make sure you name it appropriately so you can find it later on.

Note: As you will be using a command line in the next few steps, it will be easier if you name the file DriverBackup and place it directly in C: drive this will allow you to cut and paste the command line into cmd without having to make a change.

DISM /online /export-driver /destination:C:DriverBackup

Note: Change the C:DriverBackup ending in the above path to the path of the folder where you want to store the backup. (which will be the one we created earlier). Also, remember that you will need to take this folder with you before you start reinstalling Windows.

Once you have entered the line correctly into cmd, DISM will search for and make a copy of all the drivers stored in your computer’s C:WindowsSystem32DriverStore folder. Congratulations that’s the backup stage complete. The next step is showing you how to restore the drivers you just backed up.

Note: Don’t forget to take the folder with you before you start a Windows reinstall.

How to Restore Drivers on Windows 10 From a Backup.

After reinstalling Windows 10 and connecting to the internet, your computer will automatically begin searching for the latest drivers and install them automatically, without you even noticing. However, you will need to install the remaining drivers that it doesn’t detect. To do this, you will need to use Device Manager.

On the next screen, select Browse my computer for driver software, select the driver from the backup folder and wait for Windows to install it for you.

Note: Make sure you tick the box to include subfolders.

You may have to repeat this step for more than one of your drivers depending on what Windows can detect automatically. This is especially handy if you are using older devices Windows has probably forgotten about. Or less common peripheral devices.

13 Ways On How To Cool Down Laptop

Using laptops for a long time, especially while running resource-intensive tasks heats up the laptop very quickly. Overheating laptops slows down your system and may even damage the hardware components.

So, it’s always a good idea to keep your laptop as cool as possible. However, it’s not always possible to keep the temperature within an acceptable limit using normal methods.

So, we have created this article to provide you with all the possible methods you can cool down your laptop or prevent it from overheating.

The hardware components inside laptops are more tightly placed. So, their normal temperature range is higher than that of a desktop CPU.

The temperature also depends on the exact hardware device. The CPU temperature is generally 60-80 Celsius in normal use. But it can reach up to 90-95 if you are running intensive tasks such as video games.

Similarly, the normal GPU temperature is usually around 35-60 Celsius and the temperature during heavy usage is 60-80 Celsius.

There are many ways to cool down a laptop. If your laptop is only heating up moderately, using a cooling pad and changing some settings should be enough. However, if the laptop is overheating, you may need to look for additional optimizations.

The first thing you should do is maintain good airflow on your laptop. A laptop’s fan releases hot air from the openings at the bottom. If you close such gaps, the heat will get trapped, increasing the laptop’s temperature.

So, you need to make sure to place the laptop on a hard and flat surface. The rubber feet at the bottom slightly elevate the laptop providing an outlet for airflow. Placing a laptop on your lap, clothing, or any other soft surfaces will disregard the rubber feet and block the vents.

You can also use laptop stands to elevate it further and provide more passage for the hot air.

Another thing you should do is maintain a cool temperature in your workplace or wherever you use your laptop. Avoid using it in hot places and especially make sure to avoid direct sunlight.

We also recommend investing in an air conditioner or a fan to keep your room cool.

Accumulation of dust on the laptop fans and the vents is also another main reason for overheating laptops. So, you need to make sure that the surface where you keep your laptop is clean. To do so,

Wipe your desk with a damp cloth to clean loose dusts on the surface of the desk.

Spray a cleaner on the desk surface and wipe it again.

Then, use a dry cloth to wipe the desk and leave it to dry.

Furthermore, you should also keep the room and windows clean. If your surrounding is dusty, the dust accumulates quickly on the desks.

It is not only your hardware that is responsible for increasing the temperature of your laptop. When you run more resource-intensive tasks on the PC, they will naturally use more of your CPU and GPU’s processing capacity. Consequently, the processors’ temperature increases rapidly.

You should try limiting the usage of such apps, especially if you have a low-end laptop. You can also close all the unnecessary tabs on a browser. All modern browsers open separate tasks for individual tabs, videos, and so on. So limiting this number also helps lower the CPU/GPU usage, consequently lowing laptop temperature.

Apart from that, we recommend closing unnecessary background activities. You can do so from the Task Manager on Windows in the following way:

You should also disable unnecessary Startup apps. These apps run automatically on startup and use up your system resources. To do so,

Another thing you can do to cool down your laptop is to increase the fan speed. You can do so from the BIOS or UEFI settings. Here’s how you can do so:

While using the BIOS may be the default option to change fan speed, you may only want to change the speed when running resource-intensive tasks.

In such cases, if your laptop manufacturer also provides dedicated software to alter the fan speed, you can use those. Otherwise, you need to use third-party apps, such as SpeedFan, HWMonitor, Macs Fan Control, etc.

They have fans with adjustable speed control that draw out the heat. Furthermore, they also elevate your laptops and help maintain good airflow.

It’s not a healthy habit to keep your laptop on for an extended period of time. We recommend taking breaks at regular intervals to cool down your laptop.

You can either put the laptop to sleep or shut it down depending on your scenario.

We also recommend using temperature monitoring software to know when you should give your laptop a break.

If you want to close your laptop for a long interval, we recommend shutting it down properly instead of putting it to sleep. The laptop still supplies some power to its components in sleep mode, so this process can decrease battery life.

If you have set your power settings to facilitate maximum performance, it will naturally consume more power and produce more heat. To avoid such issues, you can enable the balanced or power-saving mode.

Here’s how you can do so:

On Windows

On Mac

Apple optimizes Mac to lower energy usage while manufacturing it. However, there’s something you can do to save more power.

You can also lower your brightness to save power and prevent the laptop from overheating.

While most laptops don’t support overclocking CPU or GPU, some still do. However, unlike a desktop setup, there’s little you can do to limit the excess heat produced due to overclocked components.

So, if you don’t want to decrease the laptop’s lifespan due to excess heat, we recommend disabling overclocking.

If you used some apps to overclock your laptop’s CPU or GPU, uninstall it. To do so:

Also, if you manually overclocked the components from your GPU, the easiest way to disable it is to reset your BIOS. You can likely find the option on your motherboard’s BIOS or UEFI settings. However, removing and reinserting the CMOS battery also works.

Some BIOS also has separate option to enable and disable overclocking. You can easily turn it off in such cases without resetting the BIOS.

Undervolting the CPU or GPU is the method to lower the laptop’s temperature by lowering the voltage input to the components. If you don’t run resource-intensive tasks, undervolting the processors to a particular limit is a great way to lower the heat produced by the laptop.

Undervolting your processors is usually safe, but you need to perform many essential steps. So, we have prepared dedicated articles on How to Undervolt CPU and How to Undervolt GPU to help you perform these tasks.

As we have mentioned earlier, the build-up of dust on the laptop’s fan and vents is one of the main reasons your laptop gets hot easily. It’s better to clean the laptop every 6 – 12 months depending on its usage and your location to prevent such issues.

You should definitely clean the laptop’s fans and vents if you find it heating up more quickly. here’s how you can do so:

Clean the Vents

Spray the intake air vents with canned or compressed air.

Use a vacuum cleaner to draw out the dust from the exhaust vents.

You can distinguish the vents by placing your hands over the openings. The exhaust vents throw out hot air.

Make sure not to use compressed air on the speaker vents.

Clean the Fans

Open the laptop’s case to clean the fans and the heat sink.

Dip a cotton swab in 70% isopropyl alcohol and carefully clean the fan blades.

Blow compressed air on the fan to clean the base.

Also, keep in mind that you need to hold down the fan blades while spraying air to prevent the fan from spinning and damaging itself.

You can also use the vacuum cleaner on the fan instead of the canned air.

If you experience any trouble while opening the laptop, you should ask for help from a hardware expert. You can also service your laptop at the seller or any servicing center to clean up its internal components.

If your hardware components such as heat sink, fan, coolers, etc., have become defective or are old, your laptop heats up more rapidly. The faulty fans usually make irregular noises, so they are also pretty easy to detect.

You need to replace such components if in such cases. To do so,

Moreover, if your CPU, GPU, RAM, or other components do not have sufficient specifications to support your normal laptop tasks, you will need to upgrade them.

If you aren’t confident in replacing such components, you can seek help from a hardware expert.

You should replace the thermal paste or the pad in such a scenario. The process is similar to the above method, except that you need to,

If you have any trouble reapplying the thermal paste, we recommend you ask for help from a hardware expert.

You can usually tell that your laptop is heating by checking it physically or when your system slows down. But you can also check the exact temperature from the BIOS or by using a monitoring application.

The method most users are familiar with is checking the surface temperature by using their hands or fingers. While it doesn’t give an accurate measure of the temperature, you can tell if the laptop is more hot than usual.

Usually, the hottest part is directly below the CPU, which is on the right side where you can find the vents. So place your hand there to check and compare with other instances.

Most OS also includes a feature called Thermal or Power Throttling. It lowers the power usage of your system by decreasing the resource allocated to the processes whenever your PC’s temperature crosses a certain threshold. It is an essential process to protect your hardware by cooling down the computer.

So, whenever your laptop starts slowing down or loading some processes takes longer than usual without any other reason, you can usually tell that it’s heating up. You can also check the temperature using your hands to be certain.

Computers have a feature of crashing the system when the CPU temperature reaches a certain value. It is a protective feature that prevents the CPU from being damaged beyond repair.

Powering up the PC after such crashes, you’ll also get a warning message that indicates the system detected an abnormally CPU high temperature.

It is also possible to check the actual temperature of your CPU. The built-in option to do so on a Windows system is by checking the BIOS or UEFI interface. This interface usually shows the CPU temperature on the first screen you get after accessing the interface.

However, while BIOS/UEFI shows the CPU temperature, you can’t monitor the temperature in real-time. To do so, you have to use temperature monitoring software.

Many such applications are available on the internet, such as HWinfo64, CPUz, GPUz, and so on. Most apps that you can use to undervolt or overclock your GPU and CPU also show the current temperature of the hardware.

How To Rollback Nvidia Drivers In Windows 10

The display driver makes everything related to your computer display possible, and just like any software, the driver gets updated frequently. However, bugs and errors come with some driver updates, as we saw in the recent graphical issue with the Jurassic Words Evolution 2 caused by the latest NVIDIA driver update. Some updates may not be compatible with your computer. These issues are what actually prompt users to revert their driver to a previous version by using the Roll back option in the device manager. 

Since you are here reading this article, you are most likely looking for how to roll back NVIDIA drivers in your Windows 10 computer. Fortunately, this is an effortless operation that anyone can do, and this article has just made it simpler. We’re going to detail in a step-by-step guide how you can roll back the NVIDIA driver to a previous version to fix an issue being faced after an update and some other related things you should know about the topic. 

Rollback NVIDIA drivers in Windows 10

If you are looking for how to roll back NVIDIA drivers on your computer, there are a couple of ways to do it.

Via Device Manager 

The most direct method to revert your NVIDIA driver update, including other drivers’ updates, is through the device manager. Here is how to do it:

Search for Device Manager in the Windows Search Box and open it.

3. Switch to the Driver category on the Properties window.

These steps will kick start rolling back your NVIDIA GPU to the prior version. Afterward, it would help if you restart your computer.

How to Revert NVIDIA Driver If Rollback Driver option is Grayed Out?

If you uninstalled your previous driver before updating instead of updating directly, the roll-back driver option would be greyed out. In that case, you wouldn’t be able to use the rollback feature in the device manager. However, you can simply revert your NVIDIA driver to the previous version by doing this:

1. Search for the NVIDIA Control Panel on your computer and open it.

3. On the System Information window, ensure you are on the Display section. Now, take note of the Driver version and Driver type. 

4. Visit the NVIDIA website and search for the driver version you wish to download, which should be lower than the current version. 

5. Select Download Now to kickstart the process 

6. After downloading, extract the package and install the driver on your computer. This can also be done via Device manager

Frequently Asked Questions 

Why can’t I roll back my NVIDIA driver? 

If you are set to roll back NVIDIA drivers via Device Manager and the rollback feature is grey out, meaning you can roll back the driver, it is actually due to a reason. You must probably have performed a clean install of the latest version; this means you deleted the previous version before upgrading to the recent version. In this case, you must use the other approach discussed in the article. 

Why should you roll back your NVIDIA driver?

As previously mentioned, graphics drivers sometimes come with bugs that cause issues on your computer when installing. In case you’ve installed such a driver, the only thing you could do to fix the problem you face is roll back your NVIDIA driver to a prior version. 

In case you want to uninstall your NVIDIA driver update for one reason or the other, simply follow these steps:

After doing this, restart your computer to install another version of the NVIDIA driver of your choice. 

Final Words 

The approaches covered in the article are the ways to roll back NVIDIA drivers in Windows 10 in case you are facing any issues. Also, we discussed two methods of performing the roll back which are actually the most effective and safest ones you can use.

Would You Lock Down Your Phone To Attend A Concert?

Mobile phones are definitely one of the best inventions of this century. They help us out in so many ways along with providing entertainment. But not everyone is appreciative of them being so available. Performing artists are starting to demand you “lock down” your phone in order to enter the arena. Would you lock down your phone to attend a concert?

You can’t blame them. You want people to enjoy your show, but they’re busy posting selfies of themselves to social media, chatting with their friends through text, and sometimes even playing Pokemon Go.

While Rihanna not-so-politely asked her concertgoers to put their phones away and stop playing Pokemon Go, and Adele got angry at fans for filming her concert on their phones, some other performers, such as Rihanna, want a more strict rule.

They have begun using special pouches that put your phone in lockdown. They’re not going to trust you to turn it off or put it in airplane mode. You insert your phone in the pouch and then are allowed to keep it with you so that it’s not out of your hands. If you need to use the phone, you can go outside to have a security guard open the pouch for you.

Would this method bother you? If your phone was locked up in one of these pouches so that you couldn’t use it unless you left, would you get upset? Would you prefer to use this method as long as you’re able to keep your phone on your person? Or would you just prefer not to go to concerts as long as your phone is being kept from you?

Laura Tucker

Laura has spent nearly 20 years writing news, reviews, and op-eds, with more than 10 of those years as an editor as well. She has exclusively used Apple products for the past three decades. In addition to writing and editing at MTE, she also runs the site’s sponsored review program.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

Is Your Ps5 Overheating? 6 Ways To Cool It Down

If your PlayStation 5 is acting up, even if you don’t get a temperature warning, you might be facing PS5 overheating problems!!

Before sending your precious console in for assessment and repair, there are several things you can try that won’t void the warranty and might solve your issue. So if your PS5 console needs to chill out, here’s what you need to do.

Table of Contents

Symptoms of an Overheating PS5

With millions of units sold to gamers worldwide, some PS5s will inevitably develop faults. Don’t assume that any weird behavior from your console is automatically heat-related. If your console is still under warranty and none of the tips provided below fix the issue, then we strongly recommend you contact Sony for a free repair or replacement.

Even if your PS5 isn’t under warranty, we do not recommend opening up the system to do the maintenance yourself unless you 100% know what you’re doing. Instead, take it to a certified third-party technician for assessment.

It’s important to note that removing the PS5 outer covers or opening the SSD expansion bay does not constitute opening the system since both of these actions are specifically meant for users to do.

So, how do you know if your PS5 is overheating? There are several potential symptoms:

High levels of fan noise

Graphical glitches or artifacts such as white or black dots, or the screen flashes solid colors such as green

A poor gaming experience in the form of stutter and low framerates

A sudden shutdown without warning

Crashes or instability, especially during demanding games

It’s important to note that symptoms such as visual glitches can also be traced to faulty memory or to heat-related issues with parts that are not user-serviceable. So if such problems persist after following our tips, get a professional assessment of your system.

1. Check That the PS5 Fan Is Spinning

The PlayStation 5 is an exceptionally quiet console, so you may not know when your fan (there’s just a single huge one) has stopped spinning. Without the cooling fan pushing air through the system, your PS5 will quickly shut down as it hits its failsafe temperature.

To check whether your fans are still running, boot up a game with the sound muted and keep your year close to the PS5. You should hear a faint rush of air. Alternatively, you can hold your hand near the air vents at the top (in vertical orientation) of the console. You should feel air flowing over your skin.

If it seems that your fan has stopped working, it’s time to get a warranty repair or have it replaced by a pro.

2. Remove the Covers and Vacuum the Ports

Any computer system cooled by fans will accumulate dust and lint over time. The designers of the PS5 have considered this and added special ports on the console where you can vacuum out collected dust.

All you have to do is remove the side covers and vacuum the ports indicated in the official Sony video teardown.

Then put the side covers back, power on the system, and see whether the issue is resolved. You may also want to use a can of compressed air to blow dust out of the fan through the vent. However, be careful not to create condensation by holding the can at the wrong angle!

The fan can be removed without opening the entire system if you want to give it a thorough cleaning. Just disconnect its power cable and remove the necessary screws.

3. Check Your Ventilation Space

Your PS5 is not a sealed system; it moves hot air out of the system and replaces it with cool air. Without proper ventilation around the console, this can’t happen. It’s also an issue if you place the console in a poorly ventilated enclosed space. Make sure there’s enough distance from the wall surface or the sides of your media cabinet.

Ensure that there’s room around the PS5 and that the cabinet has enough vents to allow air to move through it. Perhaps most importantly, make sure you use the PS5’s included stand!

Whether you’re using the console in vertical or horizontal mode, the included stand ensures enough space between the bottom of the console and the surface it’s on to let air flow.

4. Put Your PS5 on the Right Surface

You also should avoid running your console on soft surfaces such as a bed or carpeted floor. This can easily block vents and cause heat buildup. Not only that, there’s a lot of dust, pet hair, and dirt on the average carpet, even if it looks clean. All of that will get sucked into the system and cause issues.

Place your PS5 on a hard surface such as a shelf on a TV stand or a desk to ensure optimal cooling.

5. Control Your Room Temperature

Unless you use water cooling or exotic refrigeration, it’s generally not possible to cool a CPU or GPU to below the ambient temperature of a room. If you live in a hot climate and the heat and humidity in the room your PS5 lives in are high, it might be enough to push it over the edge.

In this case, heat issues may only present after extended amounts of play as the system’s temperature slowly rises. The only answer here is to lower the room’s temperature by using an air conditioner, opening windows, or turning on a fan.

6. Expansion SSD Overheating Issues

There’s a particular overheating issue that only affects users who have expanded the SSD storage of their PS5 by using the special expansion slot. If you want to increase the amount of storage you can play PS5 games from (rather than just archiving them on a USB drive), you can install a standard M.2 SSD in a special slot.

Of course, you must use a drive that conforms to Sony’s requirements regarding speed and physical size, but other than that, it should just work when you slot it in.

However, Sony also requires that your SSD have a heatsink attached. Many drives come with a heatsink pre-installed, but if not, you need to do this yourself. It’s as simple as buying a heatsink of the correct size, peeling off a stick, and then sticking it on the memory chips of the drive. However, if you don’t do this, the drive will still work, and you may not notice any issues at first.

What About Aftermarket Coolers?

An example of an aftermarket cooler.

You may have seen aftermarket cooling systems on Amazon that act as alternative stands or clip onto the vents of your PS5. These products promise to improve cooling and (on previous gaming consoles) reduce fan noise.

We don’t recommend that any PS5 owner purchase a cooler like these. Firstly, a properly working PS5 makes virtually no noise in the first place. Secondly, if your PS5 can’t maintain a safe operating temperature without a bolt-on cooler, it requires cleaning and perhaps even repair. On balance, the cooling claims of these products usually turn out to be a lot of hot air!

Opening the PS5 to Clean It: Should You Do It?

You are within your rights to open your console and clean it thoroughly. Although the PS5 is designed to make the removal of dust buildup easy without opening the console, you will find guides online where the console is taken apart for cleaning.

If done competently, this should be safe. However, an inexperienced person may damage electronic components due to static discharge or mechanically through a slipped screwdriver. We don’t recommend following any guides that lead you to expose the motherboard, especially if they call for dangerous actions such as replacing the liquid metal cooling substance between the PS5’s main chips and the heatsink.

While the tips above are specifically for overheating issues with the Sony PlayStation 5, they also apply broadly to the Xbox Series X and S. The current generation of consoles are all quiet systems. Still, they need exceptional airflow to achieve it while keeping temperatures under control. Clean them often so that disassembly is never necessary and give them room to breathe, and hopefully, you’ll never run into overheating problems again.

Update the detailed information about How To Cut Down On Your Drivers’ Idle Times on the Minhminhbmm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!