Trending March 2024 # How To Fix “Windows Cannot Be Installed To This Disk” Error # Suggested April 2024 # Top 11 Popular

You are reading the article How To Fix “Windows Cannot Be Installed To This Disk” Error updated in March 2024 on the website Minhminhbmm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 How To Fix “Windows Cannot Be Installed To This Disk” Error

“Windows Cannot Be Installed to This Disk” is one of the most irritating errors one could ever encounter while installing Windows on a hard drive. Notably, there could be several causes of this error. But fortunately, there are some workarounds to eliminate the “Windows Cannot Be Installed to This Disk” error, and we’ve all of them with us.

If you’re also getting the same error when trying to install Windows on your storage drive, read this troubleshooting guide until the end, as we’ve shared all the true and tested workarounds in it. So read ahead and fix the “Windows Cannot Be Installed to This Disk” error with ease.

What Are the Types Of “Windows Cannot Be Installed to This Disk” Error?

Here are some of the most common types of “Windows Cannot Be Installed to This Disk” errors users are getting when trying to install Windows:

Windows Cannot Be Installed to This Disk

The Selected Disk Is of the GPT Partition Style

Selected Disk Has an MBR Partition Table

This Computer’s Hardware May Not Support Booting to This Disk

Windows Cannot Be Installed to This Disk GPT

Windows Cannot Be Installed to This Disk the Disk May Fail Soon

Windows Must Be Installed to an NTFS Partition

Windows Cannot Be Installed on Dynamic Disk

Windows Cannot Be Installed to This MBR Disk

Why Is the “Windows Cannot Be Installed to This Disk” Error Appearing?

The “Windows Cannot Be Installed to This Disk” error usually appears when the hard drive partition style doesn’t support your BIOS. If you don’t know, there are basically two versions of BIOS: Legacy and Unified Extensible Firmware Interface (UEFI). UEFI is a modern version of BIOS.

Whereas Legacy is an older version of BIOS that doesn’t support Windows installation. So, if your system’s BIOS mode is set to Legacy, you can’t install Windows on it.

The below-mentioned ones could also be the reason for this error and other errors:

Enabled Hard Disk Protection

Disk Errors

Enabled UEFI Boot

Unnecessary Boot Devices in BIOS

Enabled AHCI Mode

Switched On EFI Boot Sources

Incorrect SATA Controller Mode Settings

Problem With Your BIOS Settings

Fix the “Windows Cannot Be Installed to This Disk” Error

Here are some working workarounds to get rid of the “Windows Cannot Be Installed to This Disk” error:

1. Confirm If Your PC Supports UEFI

Before moving to the workarounds, we’ve a quick suggestion to make. We first suggest you check if your system comes with UEFI support. Simply put, you need to check whether your system’s hard disk can install Windows. We can’t list the steps to do so, as it varies from OEM to OEM. But it’s worth stating that you can check the same in the Boot tab of BIOS.

Once you’ve moved to the Boot tab, check if your Boot Mode is set to UEFI Mode. If yes, then it means your system can install the Windows system. But something else is stopping it from installing. In that case, try other fixes to fix the “Windows Cannot Be Installed to This Disk” error.

In case the Boot Mode is set to Legacy, you can’t install Windows on it. You need to convert your GPT disk into an MBR disk to install it. You can check the next workaround to do the same.

2. Convert Your GPT Disk to MBR

If your system’s Boot Mode is set to Legacy, you’ve to convert your GPT disk to an MBR disk. You can do the same using Command Prompt and Disk Management, and this section explains the same:

Use Command Prompt

You can check the below steps to convert your GPT disk to an MBR disk using Command Prompt:

1. Press the Windows key to open the Windows Search Box, and type Command Prompt in it.

3. Once the console is opened, type list disk in it and press the Enter key to execute it. Also, make sure to enable the Diskpart utility before that by running the diskpart command.

4. Type select disk 1 in the console. Also, make sure to replace the “1” with your GPT disk’s serial number mentioned in the table that appeared after executing the previous command.

5. After that, type the clean command in the console to remove everything from the selected GPT disk.

6. Lastly, copy-paste convert MBR in the CMD and press Enter to convert the chosen GPT disk to MBR.

Using the Windows Disk Management Utility

Below are the steps to turn your GPT disk into an MBR disk using the Disk Management utility:

1. Open the Control Panel on your system and proceed to the System and Security section.

After converting your GPT disk to an MBR disk, check if you can install Windows.

Use a Third-Party Tool

You can also convert your GPT disk to an MBR disk using a third-party disk management tool. There are plenty of disk management tools that let you do so with ease. So, if the above methods seem difficult to you or doesn’t work, do the same with third-party software.

3. Make the Partition Active

It could be possible that the partition you’re using to install Windows isn’t active; thus, this error appears. In that case, we suggest you make that particular partition active and check if it improves the situation. Follow the below steps, as they  demonstrate the same:

1. Press the Windows key on your keyboard to open the search box and type Command Prompt in it.

3. Once the Command Prompt is opened with admin rights and type the diskpart command in it to activate the utility.

4. After that, execute the list disk command in the console to view all your connected hard drives and their partitions.

5. Type select disk 0 in Command Prompt and press the Enter key to execute the command.

Note: You need to now replace “0” with the hard drive digit you want to activate.

6. Once done, copy-paste list partition into the Command Prompt and press the Enter key.

7. Type the select partition 0 command in the console and replace “0” with the partition’s digit you want to activate.

8. Type active in the Command Prompt utility to activate the selected partition.

4. Make Sure That No Additional Hard Drives Are Connected to the PC

One of the reasons for getting the “Windows Cannot Be Installed to This Disk” error is the additional hard drives connected to the system. In that case, we suggest you disconnect all additional drives, such as USB flash drives, SD cards, etc., on which you aren’t going to install Windows.

Fix the “Selected Disk Has an MBR Partition Table” Error

Below are some working solutions to resolve the “Windows Cannot Be Installed to This Disk” error message:

1. Try Disabling EFI Boot Sources

One of the workarounds to get rid of the “Windows Cannot Be Installed to This Disk” error is to disable the EFI boot sources option in your system’s BIOS. Doing so will allow you to install Windows on your GPT disk without such issues. So, follow the below steps to turn off EFI boot sources in your system’s BIOS:

1. Press the Windows + I shortcut to open the Settings app and navigate to the Recovery section.

5. On the UEFI Firmware Settings screen, move to the Boot Order section and search for EFI boot sources.

6. Lastly, switch off the EFI boot sources option, exit BIOS, and try installing Windows again on your drive.

If disabling the EFI boot sources option in BIOS doesn’t help you install Windows, then you’ll have to convert your disk. You need to convert your disk from MBR to GPT. Also, make sure to re-enable the EFI boot sources option before doing so.

2. Convert From MBR to GPT Using the Command Prompt

If disabling the EFI boot sources in BIOS doesn’t eliminate the error, you need to convert your MBR disk to a GPT disk. You can easily do the same using the Command Prompt utility. We’ve explained the process to do the same in the below-mentioned instructions:

1. Press the Windows key to open search, type Command Prompt in it, and select it from the results.

2. Type diskpart in it, press Enter, and then execute the list disk command to view all the existing disks.

3. You need to now select the disk that you want to convert to GPT. So, type select disk 0 in the console. Make sure to replace “0” with the digit of the disk that you want to convert to GPT.

4. Once done, type clean in the console to clean the partition and then convert gpt to convert it into GPT.

Fix the “This Computer’s Hardware May Not Support Booting to This Disk“ Error

Try these iterations to resolve the “This Computer’s Hardware May Not Support Booting to This Disk” error:

1. Disable Write Protection

Due to this, we suggest you disable write protection on your drive and check the issue’s status. You can follow the below-mentioned instructions to disable it on your system:

1. Open Command Prompt on your Windows system with administrative rights.

2. Copy-paste the below-mentioned command into Command Prompt and press Enter.

diskpart

3. Type list disk in the same Command Prompt and press the Enter key to execute the listed command.

4. After that, copy-paste the below-mentioned command into the Command Prompt and press Enter.

select disk d

Note: Please replace “d” with the letter of the hard drive you’re trying to disable write protection on.

5. Execute the below-mentioned command in the console to remove the read-only permission.

attributes disk clear readonly

After performing the above instructions, try installing Windows again to check whether the issue is fixed.

2. Configure the SATA Controller Mode

If switching off the write protection on your hard drive does eliminate the error, then it could be possible that your SATA Controller mode settings in BIOS are improperly configured.

In that case, we suggest you set the SATA Emulator option to the AHCI Mode. We’ve mentioned the instructions to make this exact change using Registry Editor below with ease:

1. Use the Windows + R keyboard shortcut to open the Run utility, type regedit, and press the Enter key.

2. Once the Registry Editor is opened, go to the below-mentioned location:

HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorV HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorAV

6. Navigate to the HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services storahci path.

7. Double press on the Start key in the right panel, add 0 in the Value data: field, and press the Enter key.

8. After doing so, boot your system in BIOS and move to the UEFI Firmware Settings section. You can check Fix 3 (Steps 1 – 4) to enter your system’s BIOS and do the same.

9. Once you’ve moved there, look for the SATA or SATA Mode Selection option and set it to AHCI.

10. Lastly, exit BIOS and reboot your system normally and let the SATA drivers be installed. Once done, check if the error is gone.

3. Connect Your DVD Drive to the Motherboard

This error sometimes also appears when you connect your SSD and DVD to the controller. Due to this, we suggest you connect your DVD drive to your motherboard and the SSD with to system’s controller. Luckily, this has fixed the issue for some users. So, try the same with your SSD and DVD.

4. Turn Off Intel Boot Security

Some users said that disabling Intel Boot Security in BIOS can also help fix the error. Due to this, we suggest you disable the above option in your system’s BIOS. We’ve mentioned the instructions to turn off Intel Boot Security below:

1. You need to first enter your system’s BIOS mode and navigate to the Secure Boot section.

2. In the Secure Boot section, search for Intel Boot Security and disable the toggle.

5. Connect Your Hard Drive to Intel SATA 3 Port Instead of Marvell Port

Another fix to get rid of the “This Computer’s Hardware May Not Support Booting to This Disk” error is to connect your hard drive to an Intel SATA 3 port instead of a Marvell port. You can do this in the UEFI Firmware Settings section in your PC’s BIOS.

6. Turn Off All Unnecessary Boot Devices in BIOS

Some users said that disabling all the unnecessary boot devices in the system’s BIOS can also resolve the “This Computer’s Hardware May Not Support Booting to This Disk” error.

So, try disabling all unnecessary boot devices and check the issue’s status. Follow the below-mentioned instructions to disable all unnecessary boot devices:

1. You need to first enter your PC’s or laptop’s BIOS and navigate to the Boot section of it.

2. In the Boot section, you’ll see all the boot devices in the Boot Options Priorities section.

3. Lastly, disable all the enabled unnecessary boot devices using your keyboard’s arrow keys.

Fix the “Windows Cannot Be Installed to This Disk. The Disk May Fail Soon” Error

Below are some fixes to fix the “Windows Cannot Be Installed to This Disk. The Disk May Fail Soon” error:

1. Run CHKDSK Scan

If you’re getting the “Windows Cannot Be Installed to This Disk the Disk May Fail Soon” error, then they may be appearing because of some errors in your storage drive.

In that case, we suggest running a CHKDSK scan on your system to see if the drive has some errors causing this error. So check the below steps to execute a CHKDSK scan on your PC:

2. Once the Terminal is opened, copy-paste the below-mentioned command into the console and press Enter.

Note: Please make sure to replace “f” with the letter of the hard drive you want to scan for errors and issues.

chkdsk /F

3. Press the Y key on your keyboard to schedule the CHKDSK scan on the next system start.

4. Use the Alt + F4 keyboard shortcut to open the Shut Down Windows prompt and select Restart from it.

5. You’ll now see that the Windows system is restarting, and the CHKDSK scan has also started.

6. Once the CHKDSK scan completes, your system will restart and report all the errors. In case it finds some errors, you can try searching for them online and repairing them.

2. Try Replacing Your Hard Drive

If the error still appears while installing Windows, we suggest you replace your hard drive. You can try installing Windows on another hard drive to see if it eliminates the error. Also, this workaround has been suggested by Microsoft. So, try the same and see if it works.

Fix the “The Partition Contains One or More Dynamic Volumes That Are Not Supported for Installation” Error

You can follow the listed fixes to eliminate the “The Partition Contains One or More Dynamic Volumes That Are Not Supported for Installation” error while installing Windows.

1. Convert Your Dynamic Disk to a Basic Disk

If you’re getting the “The Partition Contains One or More Dynamic Volumes That Are Not Supported for Installation” error, then you need to convert your dynamic disk to a basic disk. We’ve explained the procedure to convert your dynamic hard disk to a basic disk below:

1. Use the Windows + S shortcut to open search and type Create and format hard disk partitions in it.

5. Follow the on-screen instructions to complete the conversion process and install Windows.

2. Clean the Entire Storage Drive

Another possible solution to fix the above-mentioned error is to clear the hard entire storage drive on which you’re trying to install Windows. Before doing this, make sure to take a backup of your hard drive’s data. Once done, check the below instructions to clean your entire hard drive:

1. Open the Settings app using the Windows + I shortcut and move to the Recovery section.

3. Select the Cloud download option on the How would you like to reinstall Windows? prompt.

4. Now, continue following the on-screen prompts until you reach the Additional settings window.

6. Once done, continue following the on-screen instructions to delete all the existing partitions or volumes and let the system create a new partition to install Windows on it.

Fix the “Windows Cannot Be Installed to This MBR Disk“ Error

Below are some tested fixes to get rid of the “Windows Cannot Be Installed to This MBR Disk” error:

1. Delete All Partitions & Create a New One

If you’re getting the “Windows Cannot Be Installed to This MBR Disk” error message when installing Windows, we suggest you delete all the existing partitions during the Windows installation process and create a new GPT-style partition.

This will eliminate the error, as it has for many Windows users. You can check the below-listed steps to do the same:

1. Start the Windows installation process and keep following it until you see the Which type of installation do you want? prompt.

Doing so will create a new GPT-style partition, and the new Windows will automatically install on it. You can now follow the on-screen steps to install Windows without such errors.

2. Use a 2.0 Flash Drive for Windows Installation

If you’re using an external hard drive to install Windows in the system’s drive and getting this error, then we suggest you utilize a 2.0 flash drive for the installation purpose. Doing so will allow you to boot your system in the Legacy mode.

As a result, you won’t get any errors again and be able to install Windows. In addition, using a 2.0 external flash drive is much more efficient for Windows installation. So, try the same and check the issue’s status.

FAQs

How To Fix Windows Cannot Be Installed to This Disk Using CMD?

In order to eliminate the “Windows Cannot Be Installed to This Disk” error message, you need to convert your GPT disk to an MBR disk using CMD.

How Do I Fix a GPT Partition Error?

In order to fix the GPT partition error, you must make sure that Windows can be installed on the partition. You can also try running the CHKDSK scan on your system to repair all the errors with your drive.

Why Windows 10 Is Not Installing in GPT Partition?

If you can’t install Windows 10 on your GPT partition, it could be possible that you may have disabled UEFI in your system’s BIOS. To install Windows in the GPT partition, you must enable UEFI in your BIOS.

How To Change GPT to MBR?

One of the most common methods to convert your GPT disk to an MBR disk is using the Disk Management utility. You can also use the Diskpart utility in the Command Prompt utility to do so.

How To Repair Disk Using CMD?

You need to execute the CHKDSK scan to repair your hard disk using the Command Prompt program.

Final Words

“Windows Cannot Be Installed to This Disk” is one of the most prevalent and irritating Windows installation errors. But fortunately, there are already some workarounds available to easily eliminate this error.

In case you were also encountering the same error while installing Windows on your system’s hard drive, then we hope the workarounds we shared in this guide helped you get rid of it. If the mentioned workarounds helped you resolve the “Windows Cannot Be Installed to This Disk” error, then do let us know which of the workarounds did so.

You're reading How To Fix “Windows Cannot Be Installed To This Disk” Error

Error 1722: How To Fix This Windows Installer Package Issue

Error 1722: How to Fix This Windows Installer Package Issue

455

Share

X

You may encounter Error 1722 (Windows Installer package error) while trying to install or remove a program from your device.

The issue is caused by installing a program incorrectly or when a program running as part of the setup did not finish as expected.

You can use Safe Mode to install applications or update the software to resolve this problem.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Fix Windows 11 OS errors with Fortect:

This tool repairs common computer errors by replacing the problematic system files with the initial working versions. It also keeps you away from system errors, BSoDs, and repairs damages made by malware and viruses. Fix PC issues and remove viruses damage now in 3 easy steps:

Download and Install Fortect on your PC

Launch the tool and Start scanning to find broken files that are causing the problems

Fortect has been downloaded by

0

readers this month.

When you use Windows 11, the built-in Windows Installer handles the installation, maintenance, and removal of software on your PC.

If your Installer is faulty, you might encounter errors while trying to install or remove a software program. A typical one is Error Code 1722. An error may also appear due to issues with your computer system in the following format:

Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

It is worth noting that you are likely to experience the error when you are trying to install:

Java

Security software

Drivers

Games

Microsoft products

What causes the Windows Installer 1722 Error in Windows 11?

When installing new software on your computer, errors do occur. Sometimes, this is due to the fact that the program needs a component that is no longer available on your PC or because there is a conflict with another software that’s already installed.

This can also be caused by an incorrect installation of another application because they leave traces behind and sometimes make changes in the registry. 

The registry holds all settings for them on your computer. When making changes here, they can cause errors in other programs.

When you use different kinds of software that make changes in the same area of ​​the registry it can lead to conflicts between them. These conflicts can prevent your software from working correctly.

What can I do about the Windows Installer 177 Error in Cisco VPN client?

Error 1722 Windows Installer is one of the common errors you might come across while installing Cisco VPN Client in Windows 11.

There may be different reasons for this error but the most common one could be the incompatibility of the files with the OS version, bad sectors on the disk, or damaged registry entries. That’s why our below fixes will do the trick in no time.

What causes the Error 1722 with Windows Installer Package of Acrobat DC?

Error 1722 is a common error message in Windows operating system. It usually occurs when we try to install a software program or driver using the .exe file.

Do note that it also occurs when we try to open some programs, for example, Adobe Acrobat DC. The error message appears as:

It is not a critical error and it only means that the application failed to start correctly, due to some corrupt files or missing files. You can usually correct that by reinstalling the application or the program with which you are trying to open it.

Are there multiple Windows Installer 1722 Error variations?

Windows Installer 1722 Errors in Windows 11 often occur when trying to install, reinstall, or update one of Microsoft’s programs. 

These complications are usually caused by minor issues that can be fixed in a few minutes. Here are some of the main variations that you may encounter:

Error in Application: Windows Installer Error 1722

Windows Installer Error 1722 is not a valid Win32 application

Windows Installer Error 1722 has encountered a problem and needs to close. We are sorry for the inconvenience.

Windows Installer Error 1722 can’t be located

Windows Installer Error 1722 can’t be found

Error starting program: Windows Installer Error 1722

Windows Installer Error 1722 is not running

Windows Installer Error 1722 quit

Faulty Program Path: Windows Installer Error 1722

It’s important to know how to troubleshoot Error 1722 in order to get things back to normal. In this particular guide, we will help you learn how to bypass this issue. Do not fret!

How can I fix the Error 1722 Windows Installer in Windows 11?

1. Run a PC repairing software

In order to specifically detect the potential errors in your PC, a practical answer that can really solve the error is Restoro.

This Windows repairing tool behaves as a restoring software that will deep scan your PC in order to find issues regarding privacy, crashing applications, broken registry files, or junk files.

Afterward, you will get the Scan Summary and then you’ll be able to visualize and fix every single error in your operating system.

Expert tip:

⇒ Get Restoro

2. Restart your device

In an attempt to quickly resolve this issue, you need to restart your PC. The simplest way to do this is by pressing the power button for a few seconds until the computer turns off. 

When the PC is turned on again, the error should be gone. If it doesn’t work, repeat the process until the error disappears.

3. Use Safe Mode to remove unnecessary programs

To fix Error 1722, you’ll need to open your system in Safe Mode and then remove any unnecessary applications and services from your computer.

If you’re still receiving this error even after performing these steps, try uninstalling the software that is causing the conflict and then reinstall the program again. 

Rest assured that you can certainly find the best uninstaller software that fits your budget and specific needs. Although the guide talks about Windows 10, the software can also be used in Windows 11.

Therefore, if you continue to receive Error 1722 after uninstalling the software, make sure that your antivirus software isn’t blocking the installation, and then try installing the program again.

In that regard, make sure you use one of the best antivirus solutions perfectly compatible with Windows 11 to protect your computer.

4. How to fix Error 1722 using cmd

Windows Installer Error 1722 can occur due to issues with the registry entries or broken files in your Windows 11 PC. Therefore, running the SFC and DISM scans in Command Prompt can help solve the error.

1. Press the Windows Key + R key, then type cmd in the Run dialog box.

2. Press Ctrl + Shift + Enter to open the Command Prompt.

3. Type the following command and then press Enter: DISM /Online /Cleanup-Image /ScanHealth

4. Then, type this command and press Enter: DISM /Online /Cleanup-Image /RestoreHealth

5. Wait for the scan to complete, and then restart your device.

6. Finally, input the following command and hit Enter:sfc /scannow

5. Turn on the Windows Installer 6. Unregister and re-register the Windows Installer

Press the Windows key + R key to open the Run command dialog box.

Type cmd and then press Ctrl + Shift + Enter to open the Command Prompt.

To temporarily unregister the Windows Installer, type the following command and press Enter:msiexec /unreg

When this process is complete, you can now re-register the Windows Installer. To do this, type the following command and hit Enter:msiexec /regserver

Finally, restart your device to save these changes.

7. Enable Windows Script Host

REG DELETE /“HKCUSOFTWAREMicrosoftWindows Script HostSettings” /v Enabled /f

REG DELETE /“HKLMSOFTWAREMicrosoftWindows Script HostSettings” /v Enabled /f

8. Perform a system restore Can resetting an application resolve the Windows Installer 1722 Error?

Error 1722. There is a problem with this Windows Installer package. A program required for this install to complete could not be run.

This error message is usually caused by a corrupted file in the installer program, but there are also instances where the problem lies elsewhere. If you’re receiving Error 1722, try resetting your application, then installing it again.

Flight Simulator X installation Error 1722 is one that can occasionally occur as well. Take a look at our detailed guide on Flight Simulator X Error 1722 to resolve the issue and forget all about this error message: 

Still experiencing issues?

Was this page helpful?

x

Start a conversation

Fix: Path Cannot Be Traversed Due To Untrusted Mount Point

Fix: Path cannot be traversed due to untrusted mount point

387

Share

X

Users reported getting the path cannot be traversed because it contains an untrusted mount point error message while trying to play Halo.

Windows made sure to resolve this issue in one of its update packages.

Keep your operating system up to date to resolve this error and avoid others.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

For the most part, keeping your systems up to date implies that your data will be safer, which means that your life and job should be a little less terrifying.

What can I do if I get Path cannot be traversed due to untrusted mount point?

A possible reason for the error could be that you are running an older version of Windows, which can be fixed by updating it. People are probably going to make an update to fix the bug.

2. Run an SFC scan

Prior to continuing, you must restart your computer after you have finished waiting for the process to complete (which could take some time). Alternatively, you can give a try to Fortect that will scan your PC for corrupted system files and prompt you to replace them.

3. Uninstall and reinstall the game Is Windows 11 good for gaming?

By releasing it, Microsoft is effectively inviting gamers to update, even going so far as to state that if you’re a gamer, Windows 11 was made for you and the OS is the greatest Windows for gaming that the company has ever created.

Expert tip:

By making use of fast NVMe SSDs, DirectStorage is able to significantly shorten load times and improve texture loading while also significantly reducing the CPU strain on those operations.

Despite the fact that DirectStorage is now available on Windows 10 as well, and that it is no longer necessary to utilize Windows 11 in order to benefit from it, the enhanced storage stack in Windows 11 allows DirectStorage to perform to its fullest potential.

There’s also Auto-HDR, which uses machine learning and artificial intelligence to automatically add an HDR setting to any game, regardless of whether or not the game itself supports HDR.

As an added bonus, Windows 11 is tightly integrated with the Xbox app, allowing users to play Xbox Game Pass titles on their PC if they have an Xbox Game Pass Ultimate subscription, as well as access to Xbox Cloud Gaming, where they can access and play their favorite games.

If you find that your Xbox game bar is having some issues, you should take a look at our article on what to do to fix the Xbox game bar in Windows 11.

Still experiencing issues?

Was this page helpful?

x

Start a conversation

Fix: Windows Cannot Verify The Digital Signature For This File

“Windows Cannot Verify the Digital Signature for This File” is a black screen error followed by an error code 0xc0000428. While this error can prevent your computer from booting up, it can also appear in a popup window when installing an application or device driver.

A digital signature is an electronically attached signature in an application that helps Windows verify the integrity and authenticity of the publisher. It helps protect your computer from any susceptible threats. But when Windows can not find a digital signature integrated into an application, you might face this problem.

While you generally encounter this when trying to install unsigned and uncertified drivers on your computer, it can also arise due to corrupted drivers. Whatever the causes are, this article will guide you through all the fixes that will help you eliminate the error.

It is always a good idea not to install the driver or software if it has no certified publisher and is unsigned. However, if you think that the software is legit enough to cause no harm to your computer, there are a few methods you can proceed with to install them.

Here, we have compiled 6 methods you can use to troubleshoot the error. Here, you will also learn how to solve the (error code 52) on the device manager since it also deals with digital signature verification.

Windows has a special security feature called Driver Signature Enforcement that only lets the digitally signed drivers and programs load on your computer. When this feature is on, you can not use any unsigned drivers or install them. Therefore, disabling the feature can be helpful in installing unsigned drivers and applications.

Press and keep pressing the Shift button on your keyboard.

After a while, the system will boot into recovery mode.

Your computer will reboot, and now you can install the unsigned drivers without any problem.

The computer will go into normal boot mode after a restart.

The next security feature on Windows is integrity checking. It looks after if the file system has been altered and helps verify the authenticity of the publisher. When enabled, it can prevent loading the unsigned drivers. So, you may disable integrity checking before installing those unsigned programs.

Hit Windows + R.

Type cmd and press Ctrl + Shift + Enter keys to run the elevated Command Prompt. You can also run Command Prompt through recovery mode if you are stuck in the error screen.

Then restart the computer.

Proceed with the installation of the unsigned driver.

Windows also incorporates a separate mode where you can test uncertified software and drivers. You can boot your computer in this mode, install the unsigned applications, and then go back into normal mode easily. This way, you won’t encounter an error.

Open the elevated Command Prompt.

Exit from the command window and restart your computer.

Once the system boots up in Test mode, install those uncertified software.

Restart your computer, and you will go back to normal mode.

As stated in the error message screen, the error can also arise when the file is damaged, possibly corrupted. That’s why you also need to perform a DISM and SFC Scan to fix errors in the file system. This fix is primarily aimed to solve the (error code 52) on the device manager.

Open Command Prompt with administrator rights.

Hit the Enter key on your keyboard.

Let the scan run and repair the corrupted files.

Restart your computer.

You can also opt to uninstall applications or drivers that created a problem after a recent installation. You need to seek signed drivers and software so that you won’t face a could not verify digital signature error.

Hit Windows +R.

Moreover, you can also see if there are any problematic drivers responsible for the error and uninstall them.

Hit Windows + R keys.

Type devmgmt.msc and hit Enter key.

See if you find any device with a warning sign (generally a yellow exclamation).

Confirm uninstallation in the popup and restart the computer.

Lastly, you can use the restore point created on your computer to restore it to the earlier versions, where everything was working fine. Follow these steps:

Hit Windows + R.

Whatsapp Cannot Download Media – How To Fix

Last Updated on May 5, 2023

WhatsApp is the most popular messaging app, allowing users to freely share photos, videos, and other media files with their contacts. However, from time to time errors can occur with users unable to download received media and documents.

This guide will go through the steps to try and troubleshoot the problem and show you some of the fixes to the “WhatsApp cannot download media” issue.

WhatsApp Cannot Download Media – Causes and Fixes

Step

1

Check internet connection

The issue is most likely caused by having a bad internet connection. If you are on a mobile network switching to a Wi-Fi network that provides a stronger connection can fix the issue and vice-versa. Additionally, the Wi-Fi network that you are connected to might block or limit the use of WhatsApp. If other apps work correctly on your phone then the issue may not be with your internet connection.

Step

2

Check WhatsApp Permissions

Sometimes when WhatsApp cannot download media it can be due to the app not having permission to access your phone’s storage and save files. This means that you’ll need to grant permission to WhatsApp manually.

In order to do this complete the following steps:

Android

Open Settings.

Select applications and choose WhatsApp.

Go to permissions, then files and media, and grant permission.

iOS

Open Settings.

Go to Privacy, then select Photos.

Choose Whatsapp and toggle all photos.

Step

3

Ensure enough storage space

When receiving a photo or other media file through whatsapp it must  be saved on to your phone. If there isn’t enough space on your phone then the file cannot be received.

In order to do this you will need to:

Go to phone settings.

Select storage.

Remove the required files to ensure that there is enough space.

Step

4

Set the correct date and time

Having the wrong date and time on your phone will sometimes stop WhatsApp from connecting to its servers and cause the wrong date and time error occur.

Open the settings app.

Select general.

Then select date and time.

Enable automatic date and time.

Step

5

Update WhatsApp

Sometimes using an older version of WhatsApp can cause there to be compatibility issues. Making sure you have the latest version can alleviate this.

Open the Google Play Store or App Store for iOS.

Search for WhatsApp.

If there is an update available then download and install it.

Step

6

Clear WhatApp cache

Over time when using WhatsApp the app will collect a cache of data. this helps the app to function faster. Cache files are temporary so deleting them won’t removed any valuable files or messages.

Luckily, we have handy guides on how to delete cache for android and how to delete cache for iPhone.

Step

7

Ask the person to resend the file

Simply asking the person to resend the file can fix the issue. WhatsApp stores files on its servers for up to 30 days, after that it is deleted.

When trying to download a file after 30 days users will see this prompt “Sorry, this media file appears to be missing. Please ask (Sender Name or Phone number) to resend it”.

Why isn’t WhatsApp auto downloading media?

Androids and iPhones have data saving features that prevent files from auto downloading. To enable files to auto download you need to turn off data saving.

Android:

Settings

Network and Internet

Turn off data saving

iPhone:

Settings

Mobile data

Mobile data options

Turn off low data mode

WhatsApp Cannot Download Media – Final Thoughts

After completing these steps you should be able to fix the issue with WhatsApp not being able to download recieved files. If you are still experiencing issues then you should contact WhatsApp support directly.

How To Fix Windows Mail App Error 0X8007139F.

If you have recently updated from Windows 10 version 1709 to 1803 (April Update) and are trying to set up a new email account but are receiving error 0x8007139f, this guide will show you how to fix the issue and get the mail app working normally again.

How to Filter and Hide Unwanted Content on Facebook.

The Windows 10 Mail app is probably the most useful of the preinstalled default apps on the operating system. It allows you to quickly and easily setup a variety of different email accounts and manage them all from a safe user-friendly location. Although the Mail app usually escapes update bugs, this time around it wasn’t so lucky, with error 0x8007139f making a Mail app appearance.

Anyone familiar with Windows knows Microsoft has a terrible track record when it comes to Windows 10 updates. No major update or even minor update so far has been without some kind of issue, the Windows 10 April update holds strong to this tradition. Although most update issues and errors can be fixed easily there is one major problem identified in the April update that everyone should be aware of and is linked to a previous Windows 10 automatic update error, which caused Error 0x80070002.

When manually updating to Windows 10 version 1803 from an older version stuck with cumulative update error 0x80070002, Windows becomes corrupted beyond repair and requires a fresh install. Although this is in no way related to the mail app issue, it is something I think everyone should be aware of, especially since most people have more than one Windows 10 device in their household. So if you have a computer that has this error message, make sure you make a backup of your system before installing the April Update.

Note: There are many “possible” fixes for cumulative update error 0x80070002, however, none of them are guaranteed to work. The magic fix was thought to be manually updating to 1803 using the official Microsoft Manual Update Tools.

Getting back on topic, the issue with the Windows Mail app isn’t a serious error and can be fixed by simply toggling a few newly added/rearranged settings in the Privacy menu. For anyone accustomed to using Windows 10 and its fondness for tracking, there is a good chance you have accidentally disabled a setting the mail app needs to function.

How to Fix Windows 10 Mail App Error 0x8007139f.

To begin open the Settings menu go to Privacy, then select Email from the list of options in the left-hand pane. Next, enable Allow Apps to Access Your Email and make sure the Mail and Calendar option below is also enabled. If these options are already enabled when you enter the menu, disable them, Restart your computer, then re-enable them. After your computer restarts, the Windows Mail app will allow you to use the app without error 0x8007139f.

Related: Whilst you are focused on the Windows 10 Mail app why not learn how to disable Notifications and back up emails

How to Disable Notification From the Windows 10 Mail App.

How to Backup Emails in the Windows 10 Mail App.

Update the detailed information about How To Fix “Windows Cannot Be Installed To This Disk” Error on the Minhminhbmm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!