You are reading the article How To Unbrick Or Restore At&T Galaxy Note Sgh updated in December 2023 on the website Minhminhbmm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Unbrick Or Restore At&T Galaxy Note Sgh
Well, what we can do now is try to restore your Galaxy Note back to stock using a firmware so that all bad partitions on the device are fixed and it doesn’t bootloops and restarts normally.
And well, depending on what you were trying to do, and more importantly how, it could either be soft-bricked or hard-bricked — in latter case, as sad as it is, you maybe out of luck, man!
What’s Hard-brick and Soft-brick?
Even though rare, and when you are like set to be doomed, your Galaxy Note might get hard-bricked. In which case, the Galaxy Note won’t boot into download mode — it won’t respond to key combinations you are trying to make it to boot normally or to download or recovery mode.
Hard-brick results in one dead Android device. Yes, it’s sick, and worrying. You may have to look for a JTAG service locally; the person with good knowledge of that may be able to revive it. Oh, you can also try using USB Jig (look on ebay, perhaps!) to reboot the Galaxy Note into download mode, but it may or may not work!
Hard-brick is rare, it may happen only when power supply gets disturbed of computer and/or Android device when something is being installed/updated on the device. Or, when you totally mis-do things totally recklessly. That’s why you have to be very careful with even the easiest steps.
Let’s see soft-brick now. Normally, a brick is a soft-brick, which means your device isn’t completely dead, that it is just not able to boot normally and gets stuck somewhere. And, download mode is working.
How to identify bricked Galaxy Note?
If your Android device can boot into download mode, then it means it’s a soft-brick. If it cannot, then it’s hard-bricked.
Cases of soft-brick:
Bootloop: Your Galaxy Note is not restarting properly and gets stuck at logo, and reboots again and again on it. Mostly occurs when you flash something bad.
Corrupted but working: Your Galaxy Note can’t power On, but is entering the Download mode and/or Recovery mode on pressing the key combinations. That is, it’s responding to key combos, at the least.
Any other case: As it doesn’t matter what happened, as long as you can access Download mode using the key combos specified in the unbrick Galaxy Note guide below, you’re good — no reasons to worry!
Solution?
Just install the firmware using the guide below and your Galaxy Note shall be up and running coolly soon enough! you must be able to enter download using the key combinations specified in the guide below.
Cases of Hard-brick:
Well, if you can’t enter download mode using the key combinations specified in the guide below, you got a worry — your device is hard-bricked. You can’t repair it yourself unless you are able to reboot it into download mode.
Solution?
You can try USB Jig to enter Download mode but there is no guarantee it would work. Your last hope is JTAG: find a local service provider who can us the JTAG for you and revive your dead hard bricked Galaxy Note. You can use Google to buy JTAG and try it yourself but we don’t recommend it at all, at it requires the skills of a knowledgeable person in Electronics.
Let’s see now how to unbrick or restore or fix a bricked Galaxy Note.
How to Restore AT&T Galaxy Note to Unbrick and Fix it
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
AT&T GALAXY NOTE SGH-I717 OFFICIAL JELLY BEAN 4.1.2 FIRMWARE
Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SGH-I717!
Do not use the procedures discussed here on any other Galaxy Note (including the Galaxy Note variant at T-Mobile and other International variants) or any other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVER
You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your AT&T Galaxy Note. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Note on your computer.
► SAMSUNG GALAXY Note DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS
DOWNLOADSDownload the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.
ODIN ZIP FILE FIRMWARE ZIP FILE STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might delete internal sd card too, your files will remain safe on PC.
Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe
Extract/Unzip the Firmware zip file, I717UCMD3_I717ATTMD3_ATT.zip on your computer (using 7-zip free software, preferably) to get this file: I717UCMD3_I717ATTMD3_I717UCMD3_HOME.tar.md5
Move the firmware file, I717UCMD3_I717ATTMD3_I717UCMD3_HOME.tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:
Odin3 v3.09.exe
I717UCMD3_I717ATTMD3_I717UCMD3_HOME.tar.md5
Disconnect the AT&T Galaxy Note from PC if it is connected.
Boot your AT&T Galaxy Note into Download Mode:
Power off your phone first and wait for 6-7 seconds after display is off
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy Note as said above in ‘Before you begin..’ section.
If you have already installed driver, then uninstall them and re-install back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the firmware file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Note from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
FEEDBACK US!
Your suggestions and queries, if any, are most welcomed!
You're reading How To Unbrick Or Restore At&T Galaxy Note Sgh
How To Restore Your Mac From A Backup
You may have probably heard this a million times: backup your Mac! Doing so allows you to restore all your data, including apps and settings, the moment your device crashes or when you accidentally delete them. But how do you restore a Mac from backup?
Below I’ll discuss different ways to restore your Mac from a backup. Of course, it’s assumed that you’ve got your Mac backed up to begin with. Let’s get going!
How to restore Mac from a Time Machine backup
If Time Machine is your preferred way to back up your Mac, you have the option to restore your entire hard drive to a previous date or just opt to restore a few files. You can also use Time Machine to transfer all your personal files from an old Mac to a new Mac using Migration Assistant.
Since you won’t be able to open your browser once you begin, be sure to keep these instructions handy by opening this page from another device or printing it. Also, ensure that the Time Machine backup disk is connected to your device and turned on.
The process varies depending on the kind of Mac you own. But generally, you’ll need to start your Mac in Recovery mode to begin the restoration process.
If you own an Apple silicon:
To restore your Intel-based Mac to a previous date:
Get back specific files with Time Machine on Mac
You can also use Time Machine to get back items you’ve accidentally lost or to recover old versions of your files.
Use Migration Assistant to restore Time Machine backup on a new MacRetrieve backed-up data from iCloud or other cloud services on Mac
Before you can restore your Mac using iCloud, you must set it up. To do so:
By default, you’re only given 5GB of space, which is likely not enough, especially if you’re using iCloud on several devices. You can always upgrade your iCloud to iCloud+ on any of your Apple devices. Apple offers up to 2terabytes of iCloud space for users.
Note: Unlike Time Machine, an iCloud backup only backs up specific files and data and doesn’t cover all settings, data, and programs stored in your Mac.
You can always go to your iCloud Drive via the left-side pane on Finder to access your files when needed. Alternatively, you can go to chúng tôi to access your backup files.
There are also plenty of cloud services that let you back up your Mac. Some of these services even include your Time Machine backups on the cloud. Examples of cloud services for Macs are Backblaze and Cloudberry. If you’re interested in exploring your options, we’ve written a comprehensive article on Cloudberry backup for Mac.
How to restore your Mac from a local backup (clone)
You can also create a clone or a bootable copy of your Mac’s entire hard drive. Once your external drive already has the clone of your Mac, here’s what you need to do to restore it:
Wrapping up…
You’ve got plenty of options for restoring your Mac from a backup, depending on what you need to restore. You can choose from Time Machine to iCloud to using third-party apps and cloud services to restore your backup.
But what’s most crucial is that you regularly back up your Mac. After all, there’s nothing to restore if no backed-up data exists! Have you restored your Mac from a backup? Which method worked well for you? Comment it down below!
Read more:
Author Profile
Rachel
Rachel loves anything Apple —from iPhones, to Apple Watches, to MacBooks. She is also a medical writer and a ghostwriter for various publications.
Should You Update To Macos Catalina? Or Wait? Or Not At All?
Wondering if you should update to MacOS Catalina or not? Are you not sure if you’re truly ready to update and install MacOS Catalina? Perhaps you have a critical app or two that you know aren’t supported by Catalina, or maybe you’re hesitant to update because your current Mac system is working just fine for you, or maybe there’s some other reason you’re wondering if you should or shouldn’t update to Catalina.
If you’re not sure whether or not you should install MacOS Catalina, or you’re thinking of holding off on MacOS Catalina for a while, or even ignoring it entirely, we’ll discuss those ideas and present some alternatives here.
With every major new MacOS update, some users end up wondering if they should bother updating to the latest version of MacOS or not, and MacOS Catalina 10.15 is no different in that regard. But MacOS Catalina is different in that it no longer has support for 32-bit apps, and no longer has iTunes (instead it’s replaced by a series of apps to serve the same purpose), and those changes are different from other recent MacOS software updates. So what are the options? Let’s review some of the choices available, but ultimately it will be every users own decision to make on whether or not to update to MacOS Catalina now, later, or never at all.
1: Waiting Until Critical Apps Updated to 64-bitIf you have any mission critical apps that are 32-bit, you’ll likely want to hold off on MacOS Catalina until those critical apps are updated to be 64-bit, or until you find a replacement app for them.
You can find all 32-bit apps on a Mac in System Information tool as shown here if you aren’t sure.
If you aren’t sure whether or not a particular app will ever become 64-bit, your best bet is likely to contact the developer of that application directly, and inquire with them.
2: Waiting for MacOS Catalina 10.15.1, macOS 10.15.2, macOS 10.15.3, or laterWhile many users report MacOS Catalina works great for them, there are others who report the initial macOS 10.15 release is still fairly buggy.
There are mixed reports that the first release of MacOS Catalina 10.15 has some bugs which can impact various users to varying extents, with issues impacting things that worked fine with prior macOS versions. Reported issues include wi-fi difficulties, external device incompatibilities, problems with network sharing, problems with various apps not working (many likely related to 64-bit requirement), some users are finding the new security mechanisms to be annoying, amongst other possible bugs, complaints, and opinions.
If you’re not concerned about being on the bleeding edge, then you can always wait for a future point release software update.
You can always wait to install Catalina when one of the point release bug fix updates becomes available, whether that is MacOS Catalina 10.15.1, or even MacOS Catalina 10.15.2, MacOS Catalina 10.15.3, MacOS Catalina 10.15.4, or MacOS Catalina 10.15.5 (or maybe even later, depending on the updates schedule).
There’s nothing wrong with this approach, and many cautious Mac users do will wait until later more refined versions of system software are available before jumping in.
Any future bug fix and point release updates for MacOS Catalina will arrive to Macs that are running prior versions the same way that the initial MacOS Catalina download has arrived; through Software Update and the Mac App Store.
3: What About Skipping MacOS Catalina Entirely?Is your Mac working great for you exactly as it is right now? If MacOS Mojave, macOS High Sierra, MacOS Sierra, or even an earlier system software version, is working fine for you and your Mac workflow, then you can always consider just staying put, and ignoring MacOS Catalina entirely.
This is a particularly valid approach if you rely on some 32-bit apps that you know will never be updated to 64-bit, or require some extensive upgrade that you’re not ready for. If you’re going to lose access and functionality of critical apps to your work, perhaps avoiding MacOS Catalina is a reasonable solution for you.
You’ll obviously miss out on any new features within the macOS Catalina operating system, as well as some stricter security measures available in Catalina, but for some users that’s a reasonable trade off to maintaining their currently working system as it is.
Some users may end up avoiding and skipping MacOS Catalina entirely, or using the earlier possibility of waiting for a later macOS 10.15.1, 10.15.2, or even 10.15.5 point release update.
If you’re considering skipping Catalina, keep in mind that Apple typically releases major security updates to the two prior MacOS releases, suggesting that MacOS Mojave and MacOS High Sierra will likely still receive critical security updates, even now that Catalina has been made available. Accordingly, if you stay on MacOS Mojave or High Sierra, be sure to install those security updates as they become available.
If you do plan on skipping macOS Catalina, you can learn how to hide MacOS Catalina software update from System Preferences here so that it stops showing up as an available update.
4: Want to Try Out MacOS Catalina Without a Full Commitment? Consider Dual BootingWant to dip your toes in and just try out MacOS Catalina to see what’s new, while preserving your primary MacOS installation? You can do this easily with a dual boot environment thanks to the new APFS file systems.
If you aren’t entirely sure you’re ready to commit to upgrading your primary MacOS installation to Catalina, then you can give it a test by dual booting MacOS Catalina and MacOS Mojave (or High Sierra) using APFS volumes as discussed here. You will absolutely want to backup your entire Mac before attempting this procedure.
That particular approach obviously requires an APFS file system, which means you wouldn’t be able to do it with earlier macOS versions.
–
Ultimately whether or not you update to MacOS Catalina right away, wait, or never update at all, are entirely a matter of personal choice, so do what works for you.
Related
How To Manually Create A System Restore Point In Windows 10
You’ve probably read several troubleshooting articles that warn you to create a System Restore Point before making potentially drastic changes to your Windows computer. If you have no idea what a System Restore Point means, think of it as a backup copy of your PC’s settings and other vital system files.
Say you installed a malicious program or deleted a registry file by accident, and your computer begins to malfunction, you can easily undo these (unwanted) changes by performing a System Restore. That allows you to revert your computer to an initial state (called Restore Point) when things were working smoothly.
Table of Contents
In this guide, we’ll explain how System Restore works in Windows 10 and teach you several ways to manually create a system restore point.
Enable System Protection on WindowsSystem Protection is a section of the Windows OS where restore points are created and managed. To create restore points, you need to first have System Protection enabled on your device. Although some computers have this feature activated by default out-of-the-box, others may require you to manually turn it on.
Windows automatically assigns about 3 – 10 percent of your hard drive for System Protection. You can change this by adjusting the Max Usage slider. However, make sure you assign at least 1GB (or more) because the System Protection feature won’t run if the reserved disk space is below 1GB.
If the reserved space gets occupied, Windows will delete older restore points to make room for new ones. We recommend that you proceed with the default disk space that Windows recommends.
The default allocation should be enough to accommodate as many restore points as possible. The more restore points you have, the higher the chances of recovering files, settings, and other configurations should your computer ever run into a problem.
With System Protection set up, you can now manually create restore points.
Manually Create a System Restore PointWindows automatically creates restore points when you enable System Protection. It does so once every week or prior to significant events like a Windows update, driver installation, etc. You can also manually create a restore point if you’re making system-altering changes to your computer. For example, it’s always recommended to manually create a restore point before making changes to the Windows Registry.
Windows will create the restore point and display a success message when done.
The creation process may take a couple of minutes, depending on the sizes of files in the restore point as well as your drive’s performance.
Create a Restore Point Using Windows PowerShellThere are usually many ways to get things done on Windows. You can swiftly create a restore point in seconds using the Windows PowerShell. All you need to do is paste some commands in the PowerShell console; we’ll show you how.
Paste the command below in the PowerShell console and press Enter.
powershell.exe -ExecutionPolicy Bypass -NoExit -Command “Checkpoint-Computer -Description ‘Restore Point Name’ -RestorePointType ‘MODIFY_SETTINGS’”
Note: You can replace the “Restore Point Name” placeholder in the command with any description of your choice.
Windows will create the restore point when the progress bar hits 100%.
How to Recover Changes Using System RestoreNow that you’ve created a restore point, how do you use it to revert to an earlier point if your PC runs into issues? Perhaps, you recently installed a Windows update or network driver that messed up your internet connectivity. Here’s how to undo system changes using System Restore.
Can’t find a restore point in the System Restore window? Refer to this troubleshooting guide on fixing missing restore points on Windows.
Windows Won’t Boot? Here’s How to Perform a System RestoreThe technique above shows you how to undo changes with System Restore when your computer is on. But what if your computer won’t start up at all? Or perhaps Windows boots correctly but crashes before you get to the System Restore window? How then do you restore your device?
Like we mentioned earlier, Windows often provides multiple ways to get things done. So, if your PC won’t properly load Windows, you can initiate a system restore from the Advanced Startup Options menu.
Power off your PC and turn it back on. Press and hold the power button as soon as the Windows logo appears on the screen to shut down your PC again. Repeat this three times and your PC should boot into the Windows Recovery Environment.
Never Lose Important Files & SettingsYou’ve learned how to manually create a system restore point and how to perform a system restore, even when your computer won’t boot. However, you should note that a system restore isn’t a backup solution; it only saves system files and settings, not your personal data.
In addition to manually creating a restore point, we also recommend creating a System Image Backup or a recovery CD/USB drive. With these, you can restore your computer (including all installed programs, settings, files, etc.) to a previous state should your PC get corrupted to the point where it won’t load Windows.
How To Avoid Common Byod Pitfalls At Work?
Many businesses now adhere to the “bring your own device” (BYOD) policy, which states that employees are allowed to bring and make use of their own personal electronic devices for work-related reasons. Businesses that allow their workers to bring their own electronic devices to the office can save money since they do not have to provide their employees with mobile phones, computers, or tablets of their own.
According to a survey that was published on Insight, the market for bring-your-own-device (BYOD) policies is anticipated to reach more than $360 billion by the year 2023.
The implementation of regulations that allow employees to bring their own computing devices to work not only results in cost savings but also in an increase in productivity since it enables employees to utilize the equipment with which they are already familiar.
If the following strategies are implemented, they have the potential to make everyone’s work experience more positive, which, in turn, will lead to higher levels of productivity.
Implement a Secure Passcode PolicyDo you find it odd that weak or stolen passwords were the cause of 63 percent of all reported data breaches in 2023? The issue of passwords being captured carelessly is made worse by the fact that many individuals don’t put any consideration into the process of coming up with a secure password for their accounts.
If your firm plans to let employees bring their own devices to work, you absolutely need to have a strong password policy. It is necessary to have a policy that discourages both forgetting passwords and using ones that are not very secure (for example, “Password” is a terrible password). Imagine there is a regulation that says passwords need to have a certain minimum length and that they also need to include both uppercase and lowercase letters, in addition to a number, somewhere in the rules. In addition, you have the choice to submit a request for a personalized avatar.
Passwords that are simply a few characters long are especially susceptible to being cracked because they frequently represent the concept of the firm. To illustrate, a car dealership, for example, would avoid using any passwords related to automobiles for data security reasons. Passwords such as that are just too easy to crack.
E-mail Profile ManagementMany companies adhere to making e-mail accounts available to their employees as a matter of etiquette, but what occurs if an employee resigns or is terminated? Is there any possibility that this may be paid for by my insurance? Is there a swift termination of their account? If the account is not
Even if they do not want to cause harm to your company in any way, a former worker may not be as worried about the safety of your company as you would like them to be. Issues that were previously considered to be “their concern” since they are no longer employed by you are no longer considered to be such. An inactive e-mail account is a potentially dangerous loose end that might come back to haunt you.
Allow Diversity While Also Maintaining BaselinesBecause there is such a vast selection of brands and kinds of devices to choose from, it is optional
Because of this, it is wise to accommodate deviations within reason while still setting fundamental norms and rules. It would be absurd to presume that everyone will be utilizing a smartphone that is built on Android. However, compatibility problems may occur if an employee is using a smartphone that is more than a decade old and operates on dated software. In this case, the employee’s device may not be compatible with newer versions of the program. Access to BYOD should be limited to employees who are resistant to change until such time as they have implemented the required adjustments. Up until then, it is entirely up to them whether or not they are prepared to put up with the inconvenience of not having an outlet nearby.
Set the Limits of Employee PrivacyWhen a person’s personal and professional life begins to blend together, they open themselves up to a host of issues. After all, the personal device that the employee brings to work is likely to include
Before introducing bring your own device (BYOD), a firm should first develop a thorough privacy policy that explains what the organization may and cannot do to/with the employee’s own device. Is it possible for there to be any applications that are “banned”? What exactly is going to be observed here? What are the repercussions of disobeying these guidelines?
Last but not least, there’s the issue of keeping track of usage. The call, text, data, and roaming consumption of an employee’s mobile device should be closely monitored by any organization that is worth it’s salt. There must be some degree of trust in the workplace, but at the same time, businesses ought to steer clear of Orwellian levels of surveillance. This tricky balancing act needs to be completed, and after that’s done, the results need to be relayed to the workforce through the policies that have been formed.
The extent to which a business may remotely erase information from a BYOD device if, for example, the device has been lost or stolen is a susceptible question when it comes to the wider problem of privacy. A firm has the legal right to gain access to a lost device and remove confidential information that might endanger the company somehow. BYOD requires a certain amount of give and take on everyone’s side, which may be unsettling for some people because it requires them to give up so much control over their own devices.
Before permitting employees to bring their devices to work, companies should develop a policy to govern the practice. It is unacceptable for a company to make up its policies as they go along.
ConclusionLike workplace security, BYOD security necessitates a multi-pronged strategy to counteract threats
Apple Supply Chain Hints At Refreshed Macbook Pros Arriving In October Or November
Apple is predicted to release the new 14-inch and 16-inch M2 MacBook Pro notebooks powered by its own silicon in October or November of 2023, as per supply chain chatter.
STORY HIGHLIGHTS:
Apple silicon-powered MacBook Pros may launch within two months
People in the know have been expecting both 14″ and 16″ versions
13″ MacBook Pro was updated with Apple’s M1 chip in 2023
New MacBook Pros apparently coming later in the fallAfter adding an Apple silicon variant of the 13-inch MacBook Pro to its notebook lineup in 2023, Apple is now poised to upgrade the higher-end models with its own chip.
Taiwanese industry publication DigiTimes is reporting that Apple silicon-powered MacBook Pros will probably arrive a bit later in the fall, probably in October or November, due to component shortages and supply chain disruptions caused by the coronavirus pandemic.
The ongoing chip shortages that are in varying degrees may cause the launch of Apple’s upcoming miniLED-backlit MacBook Pros to be scheduled in October or even November, instead of the usual September, according to industry sources.
Aside from ditching Intel for Apple’s own chip, which other improvements should you expect?
Is Apple finally giving MacBook Pro fans what they want?These machines are expected to become the first Mac systems to use mini-LED backlighting which made its debut on the 12.9-inch iPad Pro. Mini-LEDs provide an OLED-like experience thanks to an array of thousands of tiny LED lights providing benefits like higher contrast and brightness, as well as local dimming zones (with annoyances like blooming).
The first Mac notebooks with OLED panels are, however, not expected to launch until 2023.
Other rumored features of the upcoming MacBook Pros include a flat-edged appearance with magnetic charging, an SD memory card reader, the removal of the useless Touch Bar, an HDMI port and other perks. An earlier DigiTimes report said Apple would make “a rare investment” to expand production of mini-LED backlights for an “upcoming MacBook series”.
As for chip type, Apple currently offers the M1 chip across select Mac models. An enhanced version of that chip, dubbed M1X, was already mentioned as a possible candidate for the upcoming MacBook Pro refresh, but that chip could be instead destined for the next Mac mini.
The five-nanometre Apple M2 chip, which would file as second-generation Apple silicon, may have recently entered mass production in TSMC’s semiconductor plants in Taiwan. If true, the M2 could be the engine that will drive the next generation of Apple notebooks.
When will the first M2 MacBook Pros arrive?The new MacBook Pros are widely expected to arrive in October or November of 2023. Now, Apple sometimes announces major new notebooks in October. That being said, however, the current pandemic and supply chain situation may have delayed those plans until November.
Subscribe to iDB on YouTube
Apple is expected to stream two prerecorded product presentations, one this month and another one in October. A September event should serve as a launchpad for new iPhone and Apple Watch models. That leaves us with an October even as the most likely candidate for the MacBook Pro announcement.
But if the supply chain situation gets worse in the coming weeks, Apple could easily announce the upcoming 14 and 16-inch MacBook Pros with a press release, or preview the notebooks in October, before it starts to take pre-orders the following month.
Update the detailed information about How To Unbrick Or Restore At&T Galaxy Note Sgh on the Minhminhbmm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!