You are reading the article Maximize Value Of Coins From Adjacent Row And Columns Cannot To Be Collected updated in November 2023 on the website Minhminhbmm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Maximize Value Of Coins From Adjacent Row And Columns Cannot To Be Collected
What is coin and how to change it?The coins are the components of an array which represents the sum of the integers of the total amount of money. In this process you should return some few coins to balance the sum. If it is not constructed then we get -1 as return.
There are two solutions to Change the coin −
Recursion – Naive and slow approach.
Dynamic Programming – A timely and efficient approach
Applications of a coin in computer science −
Used to distribute a change.
Algorithm of a coin operationHere is the step by step process how we can maximize the value of coins from an adjacent row.
Step 1 − Start
Step 2 − Build a new array with a length of n+1
Step 3 − Set dynamic prog[0] to 1 for one way process
Step 4 − Iterate the value
Step 5 − Add the value of dynamicprog[index-coins[i]] to dynamicprog[index]
Step 6 − Set a range from 1 to n
Step 7 − Retun a value
Step 8 − Terminate
Syntax of a coin If the coin value is greater than the dynamicprogSum, the coin is ignored, i.e. dynamicprogTable[i][j]=dynamicprogTable[i-1][j]. If the coin value is less than the dynamicprogSum, you can consider it, i.e. dynamicprogTable[i][j]=dynamicprogTable[i- 1].[dynamicprogSum]+dynamicprogTable[i][j-coins[i-1]]. Or; maxCoins(i, j, d): Maximum number of coins that can be collected if we begin at cell (i, j) and direction d. d can be either 0 (left) or 1 (right) If (arr[i][j] == ‘#’ or isValid(i, j) == false) return 0 If (arr[i][j] == ‘C’) result = 1; Else result = 0; If (d == 0) return result + max(maxCoins(i+1, j, 1), maxCoins(i, j-1, 0)); If (d == 1) return result + max(maxCoins(i+1, j, 1), maxCoins(i, j+1, 0));Here the possible syntax of the coin change in a C++ environment. By applying this syntax we are going to bulid some codes to get a broad view of this coin.
Approaches to follow:-
Approach 1 − Recursive C++ program to find maximum number of coins
Approach 2 − Maximize value of coins when coins from adjacent row and columns cannot be collected
Recursive C++ program to find maximum number of coinsIn this code, we have applied the dynamic programming. The logic is : arr[i][j + 1] and arr[i][j – 1].
Example 1using namespace std; #define R 5 #define C 5 bool isValid(int i, int j) { } int maxCoinsRec(char arr[R][C], int i, int j, int dir){ return 0; int result = (arr[i][j] == ‘C’)? 1: 0; if (dir == 1) return result + max(maxCoinsRec(arr, i+1, j, 0), maxCoinsRec(arr, i, j+1, 1)); return result + max(maxCoinsRec(arr, i+1, j, 1), maxCoinsRec(arr, i, j-1, 0)); } int main() { char arr[R][C] = { {‘E’, ‘C’, ‘C’, ‘C’, ‘C’}, {‘C’, ‘#’, ‘C’, ‘#’, ‘E’}, {‘#’, ‘C’, ‘C’, ‘#’, ‘C’}, {‘C’, ‘E’, ‘E’, ‘C’, ‘E’}, {‘C’, ‘E’, ‘#’, ‘C’, ‘E’} }; cout << “Maximum number of collected coins is “<< maxCoinsRec(arr, 0, 0, 1); return 0; }
Output Maximum number of collected coins is 8 Maximize value of coins when coins from adjacent row and columns cannot be collectedIn this C++ code, we have applied the method to find and collect maximum coins before hitting a dead end.
Move one step ahead, i.e., cell (i, j+1) and direction remains right.
Move one step down and face left, i.e., cell (i+1, j) and direction becomes left.
Example 2using namespace std; int n = arr.size(), result = 0; dp[0] = arr[0]; result = dp[0]; if (n <= 1) return result; dp[1] = max(arr[1], arr[0]); result = max(result, dp[1]); for (int i = 2; i < n; i++) { dp[i] = max(dp[i – 1], arr[i] + dp[i – 2]); result = max(result, dp[i]); } return result; } int m = matrix.size(); if (m == 0) return 0; for (int i = 0; i < m; i++) { int val = findMax(matrix[i]); dp.push_back(val); } return findMax(dp); } int main() { { 9, 9, 1, 2 }, { 3, 8, 1, 5 } }; int result = solve(arr); cout << result; return 0; }
Output 25 ConclusionToday in this article we have learnt how to maximize a value of coins from the adjacent row where columns cannot to be collected, with the help of possible C++ build code and algorithm.
You're reading Maximize Value Of Coins From Adjacent Row And Columns Cannot To Be Collected
Find The Column Name Of Least Value In Each Row Of An R Dataframe.
To find the column name that has the least value for each row in an R data frame, we can use colnames function along with apply function.
For Example, if we have a data frame called df then we can find column name that has the least value for each row by using the command mentioned below −
df$Least_Column<-colnames(df)[apply(df,1,which.min)] Example 1Following snippet creates a sample data frame −
x1<-rpois(20,10) x2<-rpois(20,10) x3<-rpois(20,10) x4<-rpois(20,10) df1<-data.frame(x1,x2,x3,x4) df1The following dataframe is created
x1 x2 x3 x4 1 6 12 9 8 2 15 16 9 9 3 8 7 11 10 4 13 8 8 9 5 14 10 15 15 6 5 10 4 10 7 10 13 5 9 8 7 7 9 12 9 9 14 11 8 10 6 9 6 10 11 12 12 10 12 12 8 4 12 9 13 8 9 15 14 14 14 9 8 6 15 10 15 12 12 16 13 9 8 13 17 11 15 7 11 18 11 13 9 7 19 14 8 12 6 20 7 6 13 10To find the column name that has the least value for each row in df1 on the above created data frame, add the following code to the above snippet −
x1<-rpois(20,10) x2<-rpois(20,10) x3<-rpois(20,10) x4<-rpois(20,10) df1<-data.frame(x1,x2,x3,x4) df1$Smallest_Col<-colnames(df1)[apply(df1,1,which.min)] df1 OutputIf you execute all the above given snippets as a single program, it generates the following Output −
x1 x2 x3 x4 Smallest_Col 1 6 12 9 8 x1 2 15 16 9 9 x3 3 8 7 11 10 x2 4 13 8 8 9 x2 5 14 10 15 15 x2 6 5 10 4 10 x3 7 10 13 5 9 x3 8 7 7 9 12 x1 9 9 14 11 8 x4 10 6 9 6 10 x1 11 12 12 10 12 x3 12 8 4 12 9 x2 13 8 9 15 14 x1 14 14 9 8 6 x4 15 10 15 12 12 x1 16 13 9 8 13 x3 17 11 15 7 11 x3 18 11 13 9 7 x4 19 14 8 12 6 x4 20 7 6 13 10 x2 Example 2Following snippet creates a sample data frame −
y1<-round(rnorm(20),2) y2<-round(rnorm(20),2) y3<-round(rnorm(20),2) df2<-data.frame(y1,y2,y3) df2The following dataframe is created
y1 y2 y3 1 -0.33 0.19 -0.18 2 -1.41 -0.42 -0.06 3 -0.48 -0.62 -0.51 4 -0.27 0.68 0.38 5 1.00 1.04 1.31 6 -0.29 0.04 -1.23 7 0.65 -1.47 -1.11 8 0.33 0.14 0.80 9 1.29 0.20 1.14 10 -0.26 0.10 0.64 11 0.42 -0.17 0.64 12 -0.31 1.53 -0.41 13 0.21 -0.87 -1.03 14 0.85 1.82 -1.35 15 0.80 0.89 0.45 16 0.65 1.08 0.08 17 -0.05 -1.16 0.35 18 -0.91 -0.19 -0.93 19 0.14 -1.30 -0.91 20 -0.03 2.02 1.41To find the column name that has the least value for each row in df2 on the above created data frame, add the following code to the above snippet −
y1<-round(rnorm(20),2) y2<-round(rnorm(20),2) y3<-round(rnorm(20),2) df2<-data.frame(y1,y2,y3) df2$Smallest_Col<-colnames(df2)[apply(df2,1,which.min)] df2 OutputIf you execute all the above given snippets as a single program, it generates the following Output −
y1 y2 y3 Smallest_Col 1 -0.33 0.19 -0.18 y1 2 -1.41 -0.42 -0.06 y1 3 -0.48 -0.62 -0.51 y2 4 -0.27 0.68 0.38 y1 5 1.00 1.04 1.31 y1 6 -0.29 0.04 -1.23 y3 7 0.65 -1.47 -1.11 y2 8 0.33 0.14 0.80 y2 9 1.29 0.20 1.14 y2 10 -0.26 0.10 0.64 y1 11 0.42 -0.17 0.64 y2 12 -0.31 1.53 -0.41 y3 13 0.21 -0.87 -1.03 y3 14 0.85 1.82 -1.35 y3 15 0.80 0.89 0.45 y3 16 0.65 1.08 0.08 y3 17 -0.05 -1.16 0.35 y2 18 -0.91 -0.19 -0.93 y3 19 0.14 -1.30 -0.91 y2 20 -0.03 2.02 1.41 y1Program Won’t Maximize From Taskbar In Windows 10 – How To Fix?
Many users have reported that on their new Windows 10 devices, when they are using some application, they face an error where the application randomly minimizes to the taskbar, and the program won’t maximize from taskbar. This is a problem that many users have faced during using Windows 10, and here I shall discuss how you can solve this on your device.
We have shown a VIDEO walk through at the end of the post for easy solution.
Your error is most likely being caused by a hidden malware or virus. These hidden malicious apps can launch other apps on top of your application, forcing your apps to minimize and minimize stuck on screen.
A built in feature called tablet mode is another potential cause for this error as reported by many users.
Some missing system components can also prevent your application from maximizing from the taskbar, which can quickly become very annoying.
If the windows keep minimizing themselves on Windows 10, this can become very annoying very quickly. Here are some of the simple ways which you can follow to solve the error on your device.
Many computer issues are caused by hidden malware and virus that hamper your experience with your device. You need to get rid of these viruses to stop “windows keep minimizing themselves in Windows 10” error on your device.
You can choose from a variety of free antiviruses like Avast Free Antivirus and anti-malware programs like Malwarebytes Free in order to tackle this issue. Run a full scan of your PC and then try running your games.
Tablet mode (or Continuum) was a feature introduced in Windows 10 and was designed as a bridge between PC and tablets. When the tablet mode is enabled, all modern apps open in full screen mode, sometimes causing the main program window to be automatically minimized if you open a sub window in it.
This is one of the most common reasons why you may be seeing the program won’t maximize from taskbar in Windows 10 errors on your device. To solve this error, all you need to do is turn of the tablet mode in Windows 10.
You can turn off tablet mode right from the action center. There should be a quick toggle for the same in the action center, which lets you turn tablet mode on Windows 10 on or off.
When you open your machine in the clean boot state, only the set of pre-selected minimal set of drivers and startup programs are launched. Clean boot troubleshooting is designed to isolate the performance problem, abnd can help you diagnose if some software is causing the error on your device.
To boot Windows 10 into clean boot state, follow these steps:
Open a Run window by pressing Win + R.
Type msconfig and press Enter to launch the System Configuration
Clear the Load Startup Items check box, and ensure that Load System Services and Use Original boot configuration are checked.
Next, go to the Services
Select the Hide All Microsoft Services check box.
This will put Windows into a Clean Boot State. Now try to pinpoint which application or setting is causing the error on your device. Once you properly identify the culprit, you can disable the setting, or remove the application from your computer.
The Deployment Image Servicing and Management tool and the System File checker scans are used to check for and repair any missing system files. If you see that a program won’t maximize from taskbar in Windows 10, you can try running these scans in case any system file may be corrupt or missing.
Note: DISM and SFC scans use the Windows Update to replace the corrupted files. If your Update Client is already broken, you may use a Windows installation disc as a backup repair source. You have to use a different command which will be listed below.
Caution: Do not interrupt the scans until the verification is complete. The scans do take time, but interrupting the scans may break your system.
DISM.exe /Online /Cleanup-image /Restorehealth
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows/LimitAccessNote: You have to replace C:RepairSourceWindows with the location path of your repair source. You can find this path in the address bar of the drive.
sfc /scannow
After the scan finishes the problem should be resolved. If there are some corrupt files, the scan will show results as a message.
So there you have it. Now you know how to solve an error if the program won’t maximize from taskbar in Windows 10. Did you find this useful? Comment below if you did, and to discuss further the same.
Fix: Path Cannot Be Traversed Due To Untrusted Mount Point
Fix: Path cannot be traversed due to untrusted mount point
387
Share
X
Users reported getting the path cannot be traversed because it contains an untrusted mount point error message while trying to play Halo.
Windows made sure to resolve this issue in one of its update packages.
Keep your operating system up to date to resolve this error and avoid others.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
For the most part, keeping your systems up to date implies that your data will be safer, which means that your life and job should be a little less terrifying.
What can I do if I get Path cannot be traversed due to untrusted mount point?A possible reason for the error could be that you are running an older version of Windows, which can be fixed by updating it. People are probably going to make an update to fix the bug.
2. Run an SFC scanPrior to continuing, you must restart your computer after you have finished waiting for the process to complete (which could take some time). Alternatively, you can give a try to Fortect that will scan your PC for corrupted system files and prompt you to replace them.
3. Uninstall and reinstall the game Is Windows 11 good for gaming?By releasing it, Microsoft is effectively inviting gamers to update, even going so far as to state that if you’re a gamer, Windows 11 was made for you and the OS is the greatest Windows for gaming that the company has ever created.
Expert tip:
By making use of fast NVMe SSDs, DirectStorage is able to significantly shorten load times and improve texture loading while also significantly reducing the CPU strain on those operations.
Despite the fact that DirectStorage is now available on Windows 10 as well, and that it is no longer necessary to utilize Windows 11 in order to benefit from it, the enhanced storage stack in Windows 11 allows DirectStorage to perform to its fullest potential.
There’s also Auto-HDR, which uses machine learning and artificial intelligence to automatically add an HDR setting to any game, regardless of whether or not the game itself supports HDR.
As an added bonus, Windows 11 is tightly integrated with the Xbox app, allowing users to play Xbox Game Pass titles on their PC if they have an Xbox Game Pass Ultimate subscription, as well as access to Xbox Cloud Gaming, where they can access and play their favorite games.
If you find that your Xbox game bar is having some issues, you should take a look at our article on what to do to fix the Xbox game bar in Windows 11.
Still experiencing issues?
Was this page helpful?
x
Start a conversation
How To Fix “Windows Cannot Be Installed To This Disk” Error
“Windows Cannot Be Installed to This Disk” is one of the most irritating errors one could ever encounter while installing Windows on a hard drive. Notably, there could be several causes of this error. But fortunately, there are some workarounds to eliminate the “Windows Cannot Be Installed to This Disk” error, and we’ve all of them with us.
If you’re also getting the same error when trying to install Windows on your storage drive, read this troubleshooting guide until the end, as we’ve shared all the true and tested workarounds in it. So read ahead and fix the “Windows Cannot Be Installed to This Disk” error with ease.
What Are the Types Of “Windows Cannot Be Installed to This Disk” Error?
Here are some of the most common types of “Windows Cannot Be Installed to This Disk” errors users are getting when trying to install Windows:
Windows Cannot Be Installed to This Disk
The Selected Disk Is of the GPT Partition Style
Selected Disk Has an MBR Partition Table
This Computer’s Hardware May Not Support Booting to This Disk
Windows Cannot Be Installed to This Disk GPT
Windows Cannot Be Installed to This Disk the Disk May Fail Soon
Windows Must Be Installed to an NTFS Partition
Windows Cannot Be Installed on Dynamic Disk
Windows Cannot Be Installed to This MBR Disk
Why Is the “Windows Cannot Be Installed to This Disk” Error Appearing?
The “Windows Cannot Be Installed to This Disk” error usually appears when the hard drive partition style doesn’t support your BIOS. If you don’t know, there are basically two versions of BIOS: Legacy and Unified Extensible Firmware Interface (UEFI). UEFI is a modern version of BIOS.
Whereas Legacy is an older version of BIOS that doesn’t support Windows installation. So, if your system’s BIOS mode is set to Legacy, you can’t install Windows on it.
The below-mentioned ones could also be the reason for this error and other errors:
Enabled Hard Disk Protection
Disk Errors
Enabled UEFI Boot
Unnecessary Boot Devices in BIOS
Enabled AHCI Mode
Switched On EFI Boot Sources
Incorrect SATA Controller Mode Settings
Problem With Your BIOS Settings
Fix the “Windows Cannot Be Installed to This Disk” Error
Here are some working workarounds to get rid of the “Windows Cannot Be Installed to This Disk” error:
1. Confirm If Your PC Supports UEFI
Before moving to the workarounds, we’ve a quick suggestion to make. We first suggest you check if your system comes with UEFI support. Simply put, you need to check whether your system’s hard disk can install Windows. We can’t list the steps to do so, as it varies from OEM to OEM. But it’s worth stating that you can check the same in the Boot tab of BIOS.
Once you’ve moved to the Boot tab, check if your Boot Mode is set to UEFI Mode. If yes, then it means your system can install the Windows system. But something else is stopping it from installing. In that case, try other fixes to fix the “Windows Cannot Be Installed to This Disk” error.
In case the Boot Mode is set to Legacy, you can’t install Windows on it. You need to convert your GPT disk into an MBR disk to install it. You can check the next workaround to do the same.
2. Convert Your GPT Disk to MBR
If your system’s Boot Mode is set to Legacy, you’ve to convert your GPT disk to an MBR disk. You can do the same using Command Prompt and Disk Management, and this section explains the same:
Use Command Prompt
You can check the below steps to convert your GPT disk to an MBR disk using Command Prompt:
1. Press the Windows key to open the Windows Search Box, and type Command Prompt in it.
3. Once the console is opened, type list disk in it and press the Enter key to execute it. Also, make sure to enable the Diskpart utility before that by running the diskpart command.
4. Type select disk 1 in the console. Also, make sure to replace the “1” with your GPT disk’s serial number mentioned in the table that appeared after executing the previous command.
5. After that, type the clean command in the console to remove everything from the selected GPT disk.
6. Lastly, copy-paste convert MBR in the CMD and press Enter to convert the chosen GPT disk to MBR.
Using the Windows Disk Management Utility
Below are the steps to turn your GPT disk into an MBR disk using the Disk Management utility:
1. Open the Control Panel on your system and proceed to the System and Security section.
After converting your GPT disk to an MBR disk, check if you can install Windows.
Use a Third-Party Tool
You can also convert your GPT disk to an MBR disk using a third-party disk management tool. There are plenty of disk management tools that let you do so with ease. So, if the above methods seem difficult to you or doesn’t work, do the same with third-party software.
3. Make the Partition Active
It could be possible that the partition you’re using to install Windows isn’t active; thus, this error appears. In that case, we suggest you make that particular partition active and check if it improves the situation. Follow the below steps, as they demonstrate the same:
1. Press the Windows key on your keyboard to open the search box and type Command Prompt in it.
3. Once the Command Prompt is opened with admin rights and type the diskpart command in it to activate the utility.
4. After that, execute the list disk command in the console to view all your connected hard drives and their partitions.
5. Type select disk 0 in Command Prompt and press the Enter key to execute the command.
Note: You need to now replace “0” with the hard drive digit you want to activate.
6. Once done, copy-paste list partition into the Command Prompt and press the Enter key.
7. Type the select partition 0 command in the console and replace “0” with the partition’s digit you want to activate.
8. Type active in the Command Prompt utility to activate the selected partition.
4. Make Sure That No Additional Hard Drives Are Connected to the PC
One of the reasons for getting the “Windows Cannot Be Installed to This Disk” error is the additional hard drives connected to the system. In that case, we suggest you disconnect all additional drives, such as USB flash drives, SD cards, etc., on which you aren’t going to install Windows.
Fix the “Selected Disk Has an MBR Partition Table” Error
Below are some working solutions to resolve the “Windows Cannot Be Installed to This Disk” error message:
1. Try Disabling EFI Boot Sources
One of the workarounds to get rid of the “Windows Cannot Be Installed to This Disk” error is to disable the EFI boot sources option in your system’s BIOS. Doing so will allow you to install Windows on your GPT disk without such issues. So, follow the below steps to turn off EFI boot sources in your system’s BIOS:
1. Press the Windows + I shortcut to open the Settings app and navigate to the Recovery section.
5. On the UEFI Firmware Settings screen, move to the Boot Order section and search for EFI boot sources.
6. Lastly, switch off the EFI boot sources option, exit BIOS, and try installing Windows again on your drive.
If disabling the EFI boot sources option in BIOS doesn’t help you install Windows, then you’ll have to convert your disk. You need to convert your disk from MBR to GPT. Also, make sure to re-enable the EFI boot sources option before doing so.
2. Convert From MBR to GPT Using the Command Prompt
If disabling the EFI boot sources in BIOS doesn’t eliminate the error, you need to convert your MBR disk to a GPT disk. You can easily do the same using the Command Prompt utility. We’ve explained the process to do the same in the below-mentioned instructions:
1. Press the Windows key to open search, type Command Prompt in it, and select it from the results.
2. Type diskpart in it, press Enter, and then execute the list disk command to view all the existing disks.
3. You need to now select the disk that you want to convert to GPT. So, type select disk 0 in the console. Make sure to replace “0” with the digit of the disk that you want to convert to GPT.
4. Once done, type clean in the console to clean the partition and then convert gpt to convert it into GPT.
Fix the “This Computer’s Hardware May Not Support Booting to This Disk“ Error
Try these iterations to resolve the “This Computer’s Hardware May Not Support Booting to This Disk” error:
1. Disable Write Protection
Due to this, we suggest you disable write protection on your drive and check the issue’s status. You can follow the below-mentioned instructions to disable it on your system:
1. Open Command Prompt on your Windows system with administrative rights.
2. Copy-paste the below-mentioned command into Command Prompt and press Enter.
diskpart3. Type list disk in the same Command Prompt and press the Enter key to execute the listed command.
4. After that, copy-paste the below-mentioned command into the Command Prompt and press Enter.
select disk dNote: Please replace “d” with the letter of the hard drive you’re trying to disable write protection on.
5. Execute the below-mentioned command in the console to remove the read-only permission.
attributes disk clear readonlyAfter performing the above instructions, try installing Windows again to check whether the issue is fixed.
2. Configure the SATA Controller Mode
If switching off the write protection on your hard drive does eliminate the error, then it could be possible that your SATA Controller mode settings in BIOS are improperly configured.
In that case, we suggest you set the SATA Emulator option to the AHCI Mode. We’ve mentioned the instructions to make this exact change using Registry Editor below with ease:
1. Use the Windows + R keyboard shortcut to open the Run utility, type regedit, and press the Enter key.
2. Once the Registry Editor is opened, go to the below-mentioned location:
HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorV HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorAV6. Navigate to the HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services storahci path.
7. Double press on the Start key in the right panel, add 0 in the Value data: field, and press the Enter key.
8. After doing so, boot your system in BIOS and move to the UEFI Firmware Settings section. You can check Fix 3 (Steps 1 – 4) to enter your system’s BIOS and do the same.
9. Once you’ve moved there, look for the SATA or SATA Mode Selection option and set it to AHCI.
10. Lastly, exit BIOS and reboot your system normally and let the SATA drivers be installed. Once done, check if the error is gone.
3. Connect Your DVD Drive to the Motherboard
This error sometimes also appears when you connect your SSD and DVD to the controller. Due to this, we suggest you connect your DVD drive to your motherboard and the SSD with to system’s controller. Luckily, this has fixed the issue for some users. So, try the same with your SSD and DVD.
4. Turn Off Intel Boot Security
Some users said that disabling Intel Boot Security in BIOS can also help fix the error. Due to this, we suggest you disable the above option in your system’s BIOS. We’ve mentioned the instructions to turn off Intel Boot Security below:
1. You need to first enter your system’s BIOS mode and navigate to the Secure Boot section.
2. In the Secure Boot section, search for Intel Boot Security and disable the toggle.
5. Connect Your Hard Drive to Intel SATA 3 Port Instead of Marvell Port
Another fix to get rid of the “This Computer’s Hardware May Not Support Booting to This Disk” error is to connect your hard drive to an Intel SATA 3 port instead of a Marvell port. You can do this in the UEFI Firmware Settings section in your PC’s BIOS.
6. Turn Off All Unnecessary Boot Devices in BIOS
Some users said that disabling all the unnecessary boot devices in the system’s BIOS can also resolve the “This Computer’s Hardware May Not Support Booting to This Disk” error.
So, try disabling all unnecessary boot devices and check the issue’s status. Follow the below-mentioned instructions to disable all unnecessary boot devices:
1. You need to first enter your PC’s or laptop’s BIOS and navigate to the Boot section of it.
2. In the Boot section, you’ll see all the boot devices in the Boot Options Priorities section.
3. Lastly, disable all the enabled unnecessary boot devices using your keyboard’s arrow keys.
Fix the “Windows Cannot Be Installed to This Disk. The Disk May Fail Soon” Error
Below are some fixes to fix the “Windows Cannot Be Installed to This Disk. The Disk May Fail Soon” error:
1. Run CHKDSK Scan
If you’re getting the “Windows Cannot Be Installed to This Disk the Disk May Fail Soon” error, then they may be appearing because of some errors in your storage drive.
In that case, we suggest running a CHKDSK scan on your system to see if the drive has some errors causing this error. So check the below steps to execute a CHKDSK scan on your PC:
2. Once the Terminal is opened, copy-paste the below-mentioned command into the console and press Enter.
Note: Please make sure to replace “f” with the letter of the hard drive you want to scan for errors and issues.
chkdsk /F3. Press the Y key on your keyboard to schedule the CHKDSK scan on the next system start.
4. Use the Alt + F4 keyboard shortcut to open the Shut Down Windows prompt and select Restart from it.
5. You’ll now see that the Windows system is restarting, and the CHKDSK scan has also started.
6. Once the CHKDSK scan completes, your system will restart and report all the errors. In case it finds some errors, you can try searching for them online and repairing them.
2. Try Replacing Your Hard Drive
If the error still appears while installing Windows, we suggest you replace your hard drive. You can try installing Windows on another hard drive to see if it eliminates the error. Also, this workaround has been suggested by Microsoft. So, try the same and see if it works.
Fix the “The Partition Contains One or More Dynamic Volumes That Are Not Supported for Installation” Error
You can follow the listed fixes to eliminate the “The Partition Contains One or More Dynamic Volumes That Are Not Supported for Installation” error while installing Windows.
1. Convert Your Dynamic Disk to a Basic Disk
If you’re getting the “The Partition Contains One or More Dynamic Volumes That Are Not Supported for Installation” error, then you need to convert your dynamic disk to a basic disk. We’ve explained the procedure to convert your dynamic hard disk to a basic disk below:
1. Use the Windows + S shortcut to open search and type Create and format hard disk partitions in it.
5. Follow the on-screen instructions to complete the conversion process and install Windows.
2. Clean the Entire Storage Drive
Another possible solution to fix the above-mentioned error is to clear the hard entire storage drive on which you’re trying to install Windows. Before doing this, make sure to take a backup of your hard drive’s data. Once done, check the below instructions to clean your entire hard drive:
1. Open the Settings app using the Windows + I shortcut and move to the Recovery section.
3. Select the Cloud download option on the How would you like to reinstall Windows? prompt.
4. Now, continue following the on-screen prompts until you reach the Additional settings window.
6. Once done, continue following the on-screen instructions to delete all the existing partitions or volumes and let the system create a new partition to install Windows on it.
Fix the “Windows Cannot Be Installed to This MBR Disk“ Error
Below are some tested fixes to get rid of the “Windows Cannot Be Installed to This MBR Disk” error:
1. Delete All Partitions & Create a New One
If you’re getting the “Windows Cannot Be Installed to This MBR Disk” error message when installing Windows, we suggest you delete all the existing partitions during the Windows installation process and create a new GPT-style partition.
This will eliminate the error, as it has for many Windows users. You can check the below-listed steps to do the same:
1. Start the Windows installation process and keep following it until you see the Which type of installation do you want? prompt.
Doing so will create a new GPT-style partition, and the new Windows will automatically install on it. You can now follow the on-screen steps to install Windows without such errors.
2. Use a 2.0 Flash Drive for Windows Installation
If you’re using an external hard drive to install Windows in the system’s drive and getting this error, then we suggest you utilize a 2.0 flash drive for the installation purpose. Doing so will allow you to boot your system in the Legacy mode.
As a result, you won’t get any errors again and be able to install Windows. In addition, using a 2.0 external flash drive is much more efficient for Windows installation. So, try the same and check the issue’s status.
FAQs
How To Fix Windows Cannot Be Installed to This Disk Using CMD?
In order to eliminate the “Windows Cannot Be Installed to This Disk” error message, you need to convert your GPT disk to an MBR disk using CMD.
How Do I Fix a GPT Partition Error?
In order to fix the GPT partition error, you must make sure that Windows can be installed on the partition. You can also try running the CHKDSK scan on your system to repair all the errors with your drive.
Why Windows 10 Is Not Installing in GPT Partition?
If you can’t install Windows 10 on your GPT partition, it could be possible that you may have disabled UEFI in your system’s BIOS. To install Windows in the GPT partition, you must enable UEFI in your BIOS.
How To Change GPT to MBR?
One of the most common methods to convert your GPT disk to an MBR disk is using the Disk Management utility. You can also use the Diskpart utility in the Command Prompt utility to do so.
How To Repair Disk Using CMD?
You need to execute the CHKDSK scan to repair your hard disk using the Command Prompt program.
Final Words
“Windows Cannot Be Installed to This Disk” is one of the most prevalent and irritating Windows installation errors. But fortunately, there are already some workarounds available to easily eliminate this error.
In case you were also encountering the same error while installing Windows on your system’s hard drive, then we hope the workarounds we shared in this guide helped you get rid of it. If the mentioned workarounds helped you resolve the “Windows Cannot Be Installed to This Disk” error, then do let us know which of the workarounds did so.
Extracting Text Strings Using Excel’s Text To Columns
The Easy Way
In this example I’m going to show you how you can extract the domain name from a URL in Excel.
There are two approaches:
The really complicated, banging head on desk, formula method or
I don’t know why but most people choose the formula option. Probably because they don’t know Text to Columns exists.
Don’t get me wrong. Formulas have their place (and I’ll cover them next week), but unless you’re setting up a template that you’re going to use over and over again, Text to Columns is your best friend.
Text to ColumnsYou’ll find the Text to Columns tool on the Data tab of the ribbon in the Data Tools section:
Here you have to choose the file type that describes your data.
The rules are simple:
If you can draw a straight vertical line (that represents a column), between the data you want to separate, then you choose Fixed Width. If you can’t, then you need to choose Delimited.You can see in the image below I’ve put a red line where I want the text separated, but the last row is going to leave a forward slash at the front of my domain.
So, in this case I need to choose the Delimited data type. Pressing ‘Next’ brings me to step 2 of the Wizard:
Here I can choose the delimiter I want to use to separate my data. Common delimiters are Tab, Semicolon, Comma (think .csv files) or Space, but I can also stipulate another delimiter that occurs in my data.
As soon as I enter the slash in the ‘Other’ field the Wizard gives me a preview of how my data will be separated.
Each set of data between a / is separated into its own column as indicated by the vertical lines in the Data preview section below:
In the next step I can choose which columns I want to keep (1) and in what format (2), and where to place the extracted data (3):
You can see in the image below all of the column headers now read ‘Skip Column’ except the column containing the domain which I’m going to keep.
Lastly I can choose the cell Destination for the domain names (3).
Tip: if you want to retain the original URL make sure you change the destination cell (3) to a cell in an empty column, otherwise it will replace your original data.
Finished ProductHere we have our domain names in under a minute, and without bruising to your head. 🙂
Tip: Sometimes you need to run your data through Text to Columns in stages, extracting one part of the data in the first pass, then the next part, and so on. It all depends on the delimiters in your data.
Let’s take the data below as an example:
It’s almost in the right format to just use the Fixed Width format in step 1 of the Wizard, but we can see (image below) when I choose this option that it’s not quite right because the first row has 1 character too many in the second column:
That’s ok, I can use the Delimiter method like this:
See in the image above how I’ve selected several delimiters based on what is present in my text.
I’ll need to run it through the Text to Columns twice though because I also want to separate the 01 from the preceding text and I can only choose one ‘Other’ delimiter at a time.
Other Uses for Text to ColumnsAnother great use for Text to Columns is fixing dates formatted as text.
Next week I’ll step you through the formula method. Don’t worry there’s no need to tape bubble wrap to your head in anticipation of banging your head on the desk.
I’m going to show you an easy way to build complex MID formulas without the usual frustration.
Update the detailed information about Maximize Value Of Coins From Adjacent Row And Columns Cannot To Be Collected on the Minhminhbmm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!