You are reading the article Nikon’s New Action Camera Shoots Video In All Directions updated in December 2023 on the website Minhminhbmm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Nikon’s New Action Camera Shoots Video In All Directions
We may earn revenue from the products available on this page and participate in affiliate programs. Learn more ›
You’ve probably heard about 360-degree videos. You’ve also probably heard about action cameras. Today, Nikon announced its going to combine the two in a new camera called the KeyMission 360.
The KeyMission 360 is compact like a GoPro, durable like a GoPro, and it also shoots 4K video like a GoPro. But what makes the KeyMission 360 truly unique is the the fact that it can take a beating while filming or photographing in all directions.
At the time of the announcement earlier today at CES 2023, very little information was available about the camera’s technical specifications. Here’s the little information that we know: it’s waterproof to approximately 100 feet (30 meters), dust-proof, shock-proof and survives low temperatures without a hitch.
We still have no idea how much this device will cost, but it’s safe to say it will likely be on the pricier side. Right now, GoPro’s 360-degree camera rigs cost more than $1,000 including the cost of each camera. Nikon’s solution appears to be much simpler, though we expect that functionality to come a premium.
Nikon KeyMission 360
An angled view of the new omnidirectional action camera.
Nikon KeyMission 360
A right-side view of the new omnidirectional action camera.
Nikon KeyMission 360
A view from the top of the new omnidirectional action camera.
You're reading Nikon’s New Action Camera Shoots Video In All Directions
Hohem Isteady Pro 3 Review: The Best Action Camera Gimbal For The Money
The Breakdown
The Hohem iSteady Pro 3 is the gimbal to get for your action camera with a price tag of just $89.00.
Accessories
–
8.0
Design
–
7.0
User Experience
–
8.0
Battery Life
–
9.0
Value For Money
–
9.0
We’re talking about lower frame rates supported and an additional crop of the sensor to allow for EIS to work. It could even go as far as disabling the use of some codecs (such as H.265) as it needs more resources to run EIS and it cannot handle both at the same time.
So, how do you get the best possible video quality while having some silky smooth footage? Well, you already know the answer: by using a Gimbal. Today we’re going to check out the latest Hohem iSteady Pro 3, a gimbal specifically made for GoPro Hero 8/7/6/5/4/3 but that can be used with any action cameras on the market. Keep reading!
Hohem iSteady Pro 3 Review: The Best Action Camera Gimbal for the Money Hohem iSteady Pro 3: Specs
Material: ABS+PC
Weight: 361g (battery included)
Battery Capacity: 3600mAh（18650 Li-ion)
Max camera size：Height 48mm，Thickness 32mm
Rotation Angle: Pan 600° Roll 320° Tilt 320°
Payload: 150g
UnboxingThe Hohem iSteady Pro 3 comes with a case, which you can use to store the gimbal when you carry it around. Something that doesn’t seem important up until you need to carry it with you and you cannot just store it in your backpack as it could get damaged or break quite easily.
Design & Build QualityLet’s start with the 1/4 inch screw hole at the bottom used to place it on the included mini tripod or any other standard tripod; but that’s quite conventional. What’s unconventional though is the other 1/4 inch screw hole on the side which can be used to screw in accessories such as microphones, LED lights and so on. So you can turn your action camera into a Run & Gun camera setup to record vlogs and whatnot on the go.
Although it’s also a feature, another very interesting design perk is the WiFi module for the compatible cameras. This module allows to easily control GoPro cameras, including snapping photos and videos. The feature only works with GoPro cameras though and among them, those who already sport WiFi; thus no older cameras.
Either way, the gimbal can be controlled through a total of five buttons. We have the one to turn on the gimbal, one to change modes, another to zoom in and out, a knob to move the gimbal head and a trigger in the front. This trigger can be used to activate “Sport Mode” which boasts the head movement and makes it turn must faster (you’ll see a sample in the video below).
Gizchina News of the weekFinally, we have the various USB ports to charge the gimbal and the action camera attached to it of you so desired; along with four LEDs that show the battery status.
Build quality wise, it’s a solid gimbal made of the toughest plastic, so we expect it to survive most falls. Additionally, it’ll also survive some water splashes as it is IPX4 certified.
User ExperienceThe Hohem iSteady Pro 3 comes with all the features you expect to find on a gimbal. You can use it in POV mode, which allows the pan, tilt and roll motors to all work at the same time. This mode is used to create a smooth moving effect around an object or a person. We then have PTF mode which will let the camera follow your pan and tilt, PF to only follow the panning and finally L mode which is used to lock the head in a direction, no matter how you move the gimbal. All the modes worked perfectly during our tests and you’ll be able to see most of them in the video below.
Another feature that worked quite well is the time-lapse. Though to use this feature you first need to connect the gimbal to your smartphone through the proprietary app. Once you sync the smartphone and the Hohem iSteady Pro 3, you can then set up a time-lapse by choosing the start and end point, as well as the time it’ll take from point A to point B.
Additionally, through the app you can also control the gimbal remotely. So if for some reason you need to move the action camera while being away from it, you can now do it with ease.
As far as stabilization is concerned, the gimbal comes with what’s called iSteady 3.0 technology and well, it does make the video look steady. It’s probably not as smooth as a professional camera gimbal; but it definitely turns a previously unwatchable shaky footage into something enjoyable.
We can check out what the video looks like with and without the gimbal; along with a preview of some of the modes.
Battery LifeBattery life on the Hohem iSteady Pro 3 is really impressive. We’ve used it a couple times outside and we’re still at four out of four LEDs, in other words: at least 75% of charge. So, the 12 hours the company claims are probably real.
Anyhow it’s definitely more than you need, because either your action camera will run out of storage space or out of battery before the gimbal dies. The large battery can come in handy if you want to charge the action camera while filming though.
Hohem iSteady Pro 3 – ConclusionsClearly, the Hohem iSteady Pro 3 isn’t a product for everybody as you need to already own an action camera before getting it. That means that you probably already have something in mind for which you need the gimbal; do you want to record some smooth clips of your friends skateboarding or any other sports/tricks? Then yes, this is the gimbal to get with a price tag of just $89.00.
Additionally, as we mentioned earlier, the Hohem iSteady Pro 3 could also become a great vlogging companion. Put a microphone or LED light on it, along with your action camera and go out and vlog; it’s never been this easy!
BUY THE HOHEM ISTEADY PRO 3 ACTION CAMERA GIMBAL
The New Before And After Previews In Camera Raw – Photoshop Cc
In this tutorial, we’ll learn all about the new Before & After previews that Adobe recently added to Camera Raw in Photoshop CC (Creative Cloud) which make it much easier to preview our work and compare it with the original version as we’re editing and retouching our images. I’ll be using Camera Raw 8.5 here, the latest version at the time I’m writing this. To access these new preview features, you’ll need to be running Photoshop CC, available with an Adobe Creative Cloud subscription.
This tutorial isn’t meant to be a detailed explanation of how to edit images in Camera Raw. We’re going to keep things simple so we can focus specifically on the new preview options. Here’s an image I have open in Camera Raw. I’ve done nothing to the image yet other than giving it an initial crop:
The original image.
The new preview options (there’s four of them in total) are found in the bottom right corner below the image:
The four new preview options.
Here’s what Photoshop came up with. The image is already looking better:
The image after the auto correction.
Toggling The Preview For Individual PanelsThe image with the Basic panel’s preview turned off.
And now I’m back to seeing the image with my Basic panel settings applied:
The image with the Basic panel adjustments restored.
The Before And After ViewsThe left and right side-by-side view.
If you zoom in on either version of the image and scroll it around, the other version will zoom and scroll along with it, making it easy to compare the exact same area in both versions:
Both versions of the image will zoom and scroll together.
The left and right split view.
The top and bottom view.
The top and bottom split view.
Back to the original single view mode.
The Preview PreferencesWhen the menu appears, choose Preview Preferences at the bottom:
Choosing Preview Preferences.
Unchecked preview modes will no longer appear as you cycle through the views.
There’s also a few options here that control the appearance of certain visual elements when viewing the previews. As I cycled through the preview modes earlier, you may have noticed that a solid black line divided the Before & After images in the side-by-side views, yet there was no line dividing them in the two split views. That’s because in the Preview Preferences, the Divider in side-by-side views option is checked by default, while the Divider in split views option is unchecked. Personally, I don’t like the divider lines at all (not a big fan of clutter) so I would turn them both off, but that’s just me:
Use the first two options to turn the divider line between the Before & After views on or off.
The third and final option here controls whether the actual “Before” and “After” labels are visible:
The “Before” and “After” labels.
I like to keep them on so I leave the Pane labels option checked (as it is by default) but you can uncheck it to turn them off:
Use the Panel labels option to show or hide the words “Before” and “After”.
Swapping The Before And After ViewsThe Before and After versions have been swapped.
Copying The Current Settings To The Before VersionThe final new preview option in Camera Raw is, I think, the most useful and interesting of the bunch, and here’s why. As you continue making adjustments to your image, you may get to the point where you know the adjusted version looks better and there’s no longer any need to keep comparing it to the original unedited version. Instead, you may start thinking something along the lines of, “I really like how my adjusted version looks in color, but I wonder how it would look in black and white”.
This copies the current settings to the Before version, and now both the Before and After previews of my image look exactly the same:
The original version has been replaced with the current version in the Before preview.
I can now switch from the Basic panel to the HSL / Grayscale panel, select the Convert to Grayscale option, and drag the various color sliders to create my black and white version:
Creating a custom black and white version in the HSL / Grayscale panel.
The Before & After previews now make it easy to compare my black and white image with the full color version to see which one I like better:
The full color Before and black and white After versions.
Xiaomi’s New 12T Pro Has A 200Mp Camera
In that regard it’s hot on the heels of the Motorola Edge 30 Ultra, the first phone to use Samsung’s Isocell HP1 200Mp sensor. The upcoming Samsung Galaxy S23 Ultra is expected to pack an updated version of the sensor in 2023.
Xiaomi says the 12T Pro’s 200Mp sensor will improve image clarity, focus and low-light performance, but it remains to be seen whether this is borne out in real-world usage. A higher megapixel count doesn’t guarantee better photos. In fact, cramming all those pixels into a tiny sensor means each one captures less light, so we’re keen to see exactly how it performs in low-light in particular.
The company also launched the £499/€599 Xiaomi 12T. This non-Pro phone is powered by the MediaTek Dimensity 8100 Ultra; the 12T Pro opts for the Snapdragon 8+ Gen 1.
It’s notable that both phones use flagship processors, despite their relatively low prices. The 8100 Ultra isn’t quite MediaTek’s latest and greatest – that award goes to the Dimensity 9000+. You won’t find better than the 8+ Gen 1 on the Qualcomm side, however, and that’s one reason why the 12T Pro is £200/€150 more expensive. Nonetheless, you should expect great performance from both phones, especially when combined with 8- or 12GB of RAM.
On the regular 12T, the main camera lens is 108Mp – still way more pixels than on most phones. The other cameras on both are pedestrian by comparison, with 8Mp ultra-wide, 2Mp macro and 20Mp selfie sensors, showing where corners were cut to reach the price points.
Xiaomi
The selfie camera is housed within a small hole-punch notch, but it doesn’t take away from the large 6.67in, 2712 x 1220 OLED display on both handsets. Alongside a 120Hz refresh rate, you also get 480Hz touch sampling for an extra smooth and responsive experience.
Battery sizes are also identical – a 5,000mAh capacity which Xiaomi says will get you up to 13.5 hours of screen-on time. You also get ultra-fast 120W wired charging, which supposedly delivers a full charge in just 19 minutes. The necessary adapter is also included in the box.
Other features of note include an under-display fingerprint scanner, dual speakers and NFC, all within devices that weigh just over 200g (202g on the 12T, 205g on the 12T Pro).
Both phones run the MIUI skin over Android 12, but an update to Android 13 is in the works. Xiaomi now commits to three years of Android updates and four years of software updates for most of its phones, so the 12T and 12T Pro should be supported until 2026.
So far, we only have UK pricing. The regular Xiaomi 12T looks to be a capable mid-ranger for that £499/€599 price, while you’ll need to pay at least £699/€799 for the 12T Pro. However, early bird pre-orders from 20-24 October will drop the starting prices by £100/€100, with the Pro even including the new Redmi Pad tablet at no extra cost.
Full pricing and availability are yet to be .
Redmi PadXiaomi has also unveiled the Redmi Pad, which is pitched as a budget slate for mobile gaming and content consumption.
Display is arguably the highlight of any tablet, and the Redmi Pad features a 10.61in LCD panel. It has a 1200×2000 resolution and 90Hz refresh rate, alongside a very specific claim: the world’s first ever tablet to be SGS certified for low visual fatigue.
Xiaomi
Within some fairly thick bezels you’ll find an 8Mp selfie camera, although a 105° field of view makes it a decent option for video calls. On the back, there’s just one more 8Mp lens.
The Redmi Pad is equipped with an 8,000mAh battery, which Xiaomi says will last “all day”. Of course, that’ll depend on a variety of factors, including your personal usage habits. Fast charging takes a big step down here to 18W, although the 22.5W adapter in the box can make the most of it.
Despite the size of the battery, Xiaomi has managed to keep the Redmi Pad relatively thin – 7.05mm. At 445g, it’s also easy to take anywhere with you.
The Redmi Pad will cost £269/€279, but pricing elsewhere is yet to be revealed. It’s also not clear when the device will go on sale.
Redmi Buds 4 and 4 ProXiaomi has also revealed two new pairs of wireless earbuds. The Redmi Buds 4 and 4 Pro both aim to provide a premium listening experience within a compact and affordable package. But it’s the Pro model that’s the main focus.
Alongside dual drivers and hi-res audio, the most notable feature here is active noise cancellation (ANC). It can allegedly reduce background by up to 43dB, meaning the likes of keyboard typing and vehicle horns should be drowned out.
For the maximum effect, you’ll need to activate ‘deep’ ANC, but light and balanced modes are also available. If you want to hear the sound around you, there’s also an adaptive mode.
The design of the Buds 4 Pro is nothing revolutionary, but both the buds and case do feature IP54 dust and water resistance. Two colours are available – white and black.
Xiaomi
Xiaomi says you’ll get up to nine hours of usage from the Redmi Buds 4 Pro themselves, plus another 25 hours from the case. As expected, the latter charges via USB-C.
The regular Redmi Buds 4 adopt a different design, ditching the stem in favour of an in-ear build. Other key differences include ANC being limited to 35dB here, and battery life from the buds dropping to six hours.
The Buds Pro cost £84.99, but another early bird offer from 4-6 October drops the price to £74.99.
At the same event, Xiaomi announced the global launch of the Mi Band 7 Pro. This was first announced in China back in July, and it looks set to remain the budget fitness tracker to beat. Features include continuous heart rate and blood oxygen tracking, as well as support for 120 different sports, stress evaluation and female cycle tracking.
Eve Cam Indoor Camera Announced With Support For Homekit Secure Video
Update: Preorders are now open.
Eve Cam is available for pre-order from the Eve Store at a price of USD $149.95 and will start shipping on June 23rd. It will be available at chúng tôi and Amazon starting July.
Eve Systems has announced the Eve Cam, which it describes as “the first-ever indoor camera made exclusively for Apple’s HomeKit Secure Video, built from the ground up to keep your data secure”…
HomeKit Secure Video was first announced at WWDC back in the summer and was made available with iOS 13.2. Apple made much of the privacy features, and Eve does the same.
With HomeKit Secure Video, activity detected by a compatible camera like Eve Cam is privately analyzed by your home hub (Apple TV or HomePod) using on-device intelligence to determine if people or pets are present.
When important activity is detected, you and anyone you share your HomeKit Home with will receive a rich notification that lets you view the clip right from the iPhone Lock Screen.
Recorded video is available to view for ten days from the Home app. It’s securely stored for free in supported iCloud accounts and doesn’t count against your storage limit.
“Home security footage is highly personal, that’s why choosing the right indoor camera is so important”, says Jerome Gackel, CEO, Eve Systems. “Eve Cam is the first camera designed exclusively for Apple HomeKit Secure Video, enabling you to keep a close eye on your home while protecting the privacy of your personal space at any time.”
The Logitech Circle 2 was the first camera to support HomeKit Secure Video, with Apple listing the eufyCam 2, eufyCam 2C, Netatmo Smart Indoor Camera, Netatmo Smart Outdoor Camera and the Robin ProLine Doorbell as others in line. The Eve Cam is a new addition to this list.
We got an early hands-on with the Logitech Circle 2, where Zac described it as a good start but missing some key features for now.
You’ll have a little while to wait for Eve Cam, which the company says will be available in early April, but it will be attractively priced at $149.95. It also offers a decent feature set.
The 150° camera and high-def 1080p resolution give you an unmistakably clear view
Thanks to infrared night vision, you’ll be able to tell whether you have an intruder in
the house, or your kids are raiding the refrigerator
Using the integrated microphone and speaker, you can talk to whoever is in your
home at any time
With the 360° x 180° adjustable, magnetic camera base, you can easily install Eve Cam just about anywhere
You’ll need an iPhone or iPad running iOS 13.2 or later, and either a HomePod or Apple TV to act as a hub. A 200GB+ iCloud storage plan is also required.
Eve has also announced a HomeKit-compatible water-detector, Water Guard.
This HomeKit-enabled water leak detector will alert you with an audible and visible alarm. You also receive instant notifications on your iPhone or Apple Watch. It comes with a 6.5 ft, fully sensing cable that can also be easily extended. Eve Water Guard will start shipping on February 07, 2023, at a price of USD $79.95.
Alerts you acoustically with its 100-dB siren, visually by a red flashing warning light and notifies you via iPhone, iPad or Apple Watch.
Perfect for the bathroom, utility room, basement and beneath sinks and water pipes.
Finally, the Eve Energy smart switch gets a more compact form-factor and a lower price.
Sporting a new, clean white, bar-style design that doesn’t block neighboring outlets, Eve Energy packs the same popular energy monitoring and autonomous scheduling features of its predecessor. Eve Energy starts shipping January 27, 2023, at a lower price of just USD $39.95.
FTC: We use income earning auto affiliate links. More.
More On Why Public Transit Directions Got Lost In Ios 8 Apple Maps
TechCrunch is out with a story today with details on why some of the mapping features originally scheduled for iOS 8 didn’t make the cut at Apple’s WWDC keynote last week. The report quotes a few sources close to the mapping teams that say most of the improvements originally planned for iOS 8 weren’t finished on time due to talent departures and internal politics:
Why didn’t they appear? One tipster says it was a personnel issue: “Many developers left the company, no map improvements planned for iOS 8 release were finished in time. Mostly it was failure of project managers and engineering project managers, tasks were very badly planned, developers had to switch multiple times from project to project.”… It’s a take that is both contested and corroborated by our other source. “I would say that planning, project management and internal politics issues were a much more significant contributor to the failure to complete projects than developers leaving the group,” the source said.
We reported leading up to WWDC that the transit directions in iOS 8 might be pushed back to instead focus on other priorities.
While the TechCrunch report doesn’t mention any names, we do know that the mapping team has lost a few key people recently. Back in March, reports popped up that Cathy Edwards, who happened to be in charge of Maps Quality after joining Apple through the company’s acquisition of Chomp, was leaving the company. The reason behind Cathy’s departure was unknown at the time, but we’ve learned from sources that disagreements with employees on the Maps team working under Edwards and an opposition to her management style lead to problems on the Maps team and ultimately her leaving in April. Apple also lost key Maps team member Jared Waldman from Placebase who worked as Head of Geo at Apple Maps until late last year. In addition, we’ve heard from former employees of the mapping team that recently left the company due to issues with Edwards and management of the Maps team.
9to5Mac has viewed email exchanges between employees regarding several complaints filed about Edwards and requests for investigations by Apple into her treatment of employees.
We previously reported that Apple was working on a number of new mapping features that it was originally planning for iOS 8 and most of those features actually appeared at Apple’s WWDC last week. Those features included improved data, indoor mapping features, and public transit. We also mentioned augmented reality modes slated for future versions of iOS 8. On top of improved data (Flyover city tours, Vector maps in China, Navigation for China), Apple also made a big push into indoor mapping this year, leaving public transit as the only feature missing from iOS 8 at WWDC.
A former Maps team member told 9to5Mac:
The problem with maps is that iTunes is running maps, the don’t want to give up control to people with map experience. Their are no directors in maps with map experience… The EPMs have a difficult role. It’s hard to get a developer to a meeting, managers would limit the communication with the EPMs and show up once a week to daily meetings.
It’s worth noting that iOS 8 is currently missing a lot of features that Apple DID announce, so there is always a possibility that public transit and other mapping features could arrive by the time the new OS goes public this fall. If Apple’s team is truly not running as smoothly as it would like, it may have held off on announcing the feature until an ETA was more clear.
FTC: We use income earning auto affiliate links. More.
Update the detailed information about Nikon’s New Action Camera Shoots Video In All Directions on the Minhminhbmm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!