Trending February 2024 # The Connection Has Timed Out: How To Fix It On All Browsers # Suggested March 2024 # Top 7 Popular

You are reading the article The Connection Has Timed Out: How To Fix It On All Browsers updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 The Connection Has Timed Out: How To Fix It On All Browsers

The Connection Has Timed Out: How to Fix it on All Browsers Changing the system’s internet default time out is a quick solution




Connection time-outs usually make you unable to connect to a particular website.

Today we are looking at why this happens and solutions to fix them.

You may try to adjust LAN settings, test your browser, and troubleshoot your router.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

One of the most annoying things when trying to access your favorite website is a connection timed-out error, which can happen on all browsers.

It’s usually not your fault because the server of the site you want to access is probably not available at the moment, so sometimes, all you can do is wait.

But, sometimes, users cause connection timed-out errors by consciously or unconsciously changing Windows settings.

So, follow the instructions from this article to ensure you didn’t cause this error and find out how to solve the problem.

What does it mean when it says the connection has timed out?

When a connection timeout occurs on the client’s end, it often means that the client has lost contact with the server or is unable to connect to it for some other reason, such as a distant firewall blocking traffic or the web server going down.

What can cause a connection timeout?

Most web browsers seem to feature a few-minute timeout or keep-alive setting. This implies that the browser will immediately sever the connection if there is no network activity between it and the server hosting the web page.

Connection timed out can be a problematic error, but users reported the following errors as well:

Connection timed out WiFi – This error message can appear on any PC, but according to users, it’s most common while using a WiFi connection.

Your connection either timed out or was lost – This is a standard variation of this message, and it appears mostly if your Internet connection is unresponsive.

Connection timeout TCP – In some rare cases, this error can be caused by your TCP configuration. To fix this problem, you need to edit your TCP configuration manually.

Connection error timed out – This is another variation of this error, and you can fix it simply by using one of the solutions from this article.

The connection request timed out – This error message can sometimes appear, and your network configuration usually causes it. To fix it, you’ll need to adjust your network settings.

Connection attempt timed out – Sometimes, your connection can get timed out due to network issues. After diagnosing and fixing the issue, the problem should be resolved.

Connection server timed out – This problem usually appears if the server doesn’t respond in time, and according to users, the issue is generally caused by a network problem.

The connection has been reset, closed by the server – Sometimes, this error can occur simply because your connection was closed by the server. If your configuration isn’t correct, the server might reject your connection.

Connection timed out Firefox, Chrome – Users reported this problem on all major browsers – According to them, this issue appears mostly on Firefox and Chrome.

Is your current browser using too many PC resources? It’s time for an upgrade

Opera GX is the first gaming browser that allows custom control over resources. It lets you set a custom limit for how much RAM and CPU each tab can use.

You can also limit bandwidth usage and benefit from online privacy with a free, unlimited VPN. Enabling battery mode, dark mode and the adblocker can also help load pages faster.

Opera GX

Surf the web error-free with this lightweight browser with customizable performance features!

Free Get Opera GX

How do I fix the connection has timed out error? 1. Change the default timeout setting

Browsers usually have a timeout limit for the site’s server to respond, and they automatically show a connection timed-out warning if the server doesn’t respond.

So, if you think your favorite site’s server will respond in, let’s say, 20 minutes, and the timeout limit is set to 10, you’ll get the error.

There’s a way to change the default timeout limit in Windows, and it’s not that complicated. So all you have to do is to perform one Registry fix.

But since sites usually don’t take 20 minutes to load, this probably won’t solve the problem (at least you learned how to change your timeout limit, in case you need it). So, check out some of the following solutions.

2. Adjust LAN Settings

Try to reaccess your favorite site after changing LAN Settings, and if the error shows again, try the next solution.

3. Edit Windows Hosts File

There’s a chance you’ve blocked a specific website in your Host’s file, so logically, you cannot access it now.

4. Renew DNS and IP

DNS cache could also cause a connection timed-out error, so we’ll clear the cache, just in case.

5. Disable problematic extensions

Many users use various extensions, but sometimes your extensions can interfere with your browser and cause Connection timed out a message to appear.

To fix the problem, you need to find and disable the problematic extension.

Users reported that the HTTPS Everywhere extension was the cause of this problem, so if you use it, be sure to disable it and check if that solves the problem.

If you use the problematic extension frequently, update it to the latest version and check if that solves the problem.

6. Reset your browser to default

After that, your browser will be reset, and all your cookies, history, and extensions will be removed.

If you’re getting the Connection has timed out message, you might want to try resetting your browser settings to default, and this can be done in all browsers.

7. Run your browser in Compatibility mode

Sometimes you can fix Connection timed out message simply by running your browser in Compatibility mode.

After setting the compatibility mode, the problem should be resolved. However, remember that you might have to experience different settings to find the location that works for you.

8. Remove Trusteer Rapport

Expert tip:

This software offers an extra layer of security, but many users reported that it usually interferes with your browser, causing this error to appear.

To fix the issue, users are recommending thoroughly uninstalling Trusteer Rapport. After removing the application, the problem should be resolved entirely.

9. Make sure that you’re using the 64-bit version of your browser

Most PCs today support 64-bit architecture, and to achieve maximum performance, it’s recommended to use 64-bit applications on your PC.

Users reported the Connection timed out message while using a 32-bit version of Chrome on a 64-bit Windows.

We recommend removing your browser and installing the 64-bit version to fix the issue. After doing that, the problem should be resolved entirely.

10. Restart your router

According to users, you might be able to fix the problem simply by restarting your router.

To do that, press the power button on your router to turn it off. Then, you can disconnect all the cables from your router and leave it for a minute.

Now reconnect and press the power button to turn your router on again. After that, wait while your router starts and check if the problem is resolved.

This is a simple solution, and several users reported that it works, so feel free to try it out. However, in some cases, users found that the router was the issue, so you might consider getting a new one.

11. Make sure that your browser is up to date

Sometimes the Connection timed out message can appear if your browser is out of date. This is because outdated software can have compatibility issues and bugs that can cause this and other errors.

To fix the problem, ensure your browser is up to date.

After you update the browser, check if the issue persists. If the problem still appears, you might want to download and install a beta version of your browser.

Several users reported that installing Google Canary fixed the problem, so be sure to try that.

Alternatively, you can try a browser we can’t recommend enough, making all the Chrome-induced aches a thing of the past.

Opera is a great alternative solution that offers smooth browsing and safety online.

⇒ Get Opera

12. Clear your browsing data

After clearing your cache, restart your browser and check again. Sometimes, the Connection has timed-out message can appear due to an old cache, and removing the cache may fix it on all browsers.

13. Use Google’s DNS

After doing that, check if the error message still appears.

14. Disable IPv6

Once your PC restarts, check if the problem still appears. If any new issues appear after disabling IPv6, be sure to enable it back again.

How do I fix the connection has timed out on Windows 11?

Fixing the connection has timed out error on Windows 11 is pretty straightforward. The causes are similar to Windows 10, and the solutions are basically the same.

Hence, go through the list of fixes in this guide and apply them accordingly on Windows 11.

Why am I getting the connection has timed out on all browsers?

If you are getting the connection timed out error on all browsers, it is likely due to problems with the server of the site you are trying to visit.

This is because browsers have a limited time for a website’s server to respond. So if the server does not answer, you will get the connection timed out error.

Also, it might be down to issues with your network. So, you need to make sure it is solid and active.

That’s about it; once again, performing all these solutions doesn’t mean you’ll be able to access the site because it’s often their error.

Note that you will be able to apply these solutions also if the network connection has timed out on AnyDesk, or if you get the error message connection timed out: no further information.

Was this page helpful?


You're reading The Connection Has Timed Out: How To Fix It On All Browsers

The Operation Timed Out, Diskpart Virtual Disk Service Error

While creating a drive partition on a hard disk via the Diskpart utility, some users have experienced the “The operation timed out” error. They have also tried creating the new partition on their hard disk via the Disk Management console but received the “The operation failed to complete” error. Both of these errors prevent users from creating a new partition on their hard disks. If you see the same error messages on the Disk Management console or the Diskpart, the solutions described in this post may help you fix the problem.

The complete error message that users received in the Disc Management console is as follows:

The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by using the refresh task. If the problem persists, close the Disk Management console, then restart Disk Management or restart the computer.

The complete error message displayed by Diskpart while creating a new partition on a hard disk is as follows:

The operation timed out.

If the problem persists exit DiskPart, then restart DiskPart or restart the computer.

Fix Diskpart Virtual Disk Service error, The operation timed out

The cause and solution of the above two errors are the same. The Disk Management console and Diskpart utility display these errors when your computer shuts down suddenly due to a power failure or due to any other reason immediately after creating a partition. After you create a new partition or volume on a hard disk, Windows writes appropriate registry entries for the newly created volume. But if your system shuts down unexpectedly before Windows completes the process of writing the registry entries for the newly created volume, the volume remains partially installed on your system. In this case, when you try to create a new volume, the incorrectly installed volume interferes with the creation of the new volume. Due to this, you receive an error message in the Disk Management console and the Diskpart.

In addition to the above error messages, you may also see the following popup message:

Windows needs to install driver software for your Unknown Device

The following solutions may help you fix this issue.

Restart the computer and try again

Refresh the object by using the RESCAN command

Delete the Unknown device from the Device Manager

Check if the chúng tôi file is missing

Below, we have described both of these solutions in detail.

1] Restart the computer and try again

If you read the error message carefully, you are told to restart the Diskpart utility or restart the computer if the problem persists. Hence, close Diskpart and launch it again, and then check if you can create a new partition. If not, restart your computer, then run the Diskpart again and check if the issue persists. If restarting the computer does not help, try the next solution.

2] Refresh the object by using the RESCAN command

The Rescan command in a Diskpart utility is used to locate newly added disks to a computer. You can run the rescan command to detect the changes in your disk configuration. On running this command, the Diskpart utility will scan all the attached disks for configuration changes and also update other information, like basic volumes, file systems, and drive letters. According to the error message, refreshing the object by using the rescan command can fix the problem. The steps to run the rescan command via the Diskpart utility are written below:

Launch Comand Prompt as administrator.

Type Diskpart and hit Enter.

Type rescan and hit Enter.

After the completion of the above command, check if you can create a partition using the Diskpart utility. If you receive the same error message while creating a partition via Diskpart, try the next solution.

3] Delete the Unknown device from the Device Manager

The number of volumes created on your hard disk is also shown in the Device Manager under the Storage Volumes branch. If Windows encounters an error with a particular storage volume, you will see a warning sign for that storage volume, or that volume is labeled as an “Unknown device” in the Device Manager. Open the Device Manager and uninstall the volume labeled as “Unknown device.” The steps for the same are explained below:

Press the Win + X keys and select Device Manager.

Close the Device Manager.

Now, you should be able to create a new partition using the Disk Management console or the Diskpart utility. If this does not work, restart your computer and try again. If the problem persists, try the next solution.

4] Check if the chúng tôi file is missing %Systemroot%inf

The above command will open the Inf folder. Now, check if the chúng tôi file is present there. If not, follow the instructions explained below.

sfc /verifyonly

If you see the “problems were found” message after the above command is executed successfully, type the following command and press Enter.

sfc /scannow

Now, open the Inf folder by using the Run command box as explained above. Your system should show the chúng tôi file. If you do not find the chúng tôi file in the Inf folder, you have to copy it from another healthy computer and then paste it into the Inf folder. This should fix the issue. Do note that, the computer from which you copy the chúng tôi file should be running on the same version of Windows OS and have the same CPU architecture as yours.


How do I fix Diskpart Virtual disk service error?

Diskpart is a powerful command-line tool that lets you manage hard disks installed on your computer. While performing different actions on your hard disks via the Diskpart tool, you may receive different virtual disk service errors, like “Delete is not allowed on the current boot, system, pagefile, crashdump or hibernation volume,” “The operation timed out,” etc. Different Diskpart virtual disk service errors require different troubleshooting methods.

For example, the virtual disk service error “Delete is not allowed” prevents you from deleting a particular partition on your hard disk. To resolve this error, you can try the following fixes:

Disable the paging file,

Launch the Command Prompt from Windows RE, etc.

Can I restart the Virtual disk service?

Hope this helps.

Read next: DiskPart error, Data error cyclic redundancy check.

Wifi Keeps Disconnecting All The Time? Here’s How To Fix It

A patchy WiFi connection that keeps dropping out of service over and over again can be a major inconvenience.

The culprit could be anything from an out-of-date router and slow internet speeds to an incorrect computer setting or a huge outage on your internet service provider’s end.

Table of Contents

To help you figure out why your WiFi keeps disconnecting, we’ve put together an explainer with a list of causes and solutions to help you bring that speedy WiFi service back to life.

Why Does My WiFi Keep Disconnecting?

Whether you’re trying to send an important email or you want to do a conference call on your PC or mobile device, a dropped WiFi connection can be an impediment to your life. Some of the main reasons why your WiFi keeps disconnecting include:

Being in Airplane mode

Slow speeds owing to signal, slow DNS server or packet loss

Outdated WiFi driver software

A recent update created bugs that disrupt the WiFi connection

Power management issues

Poorly configured wireless adapter

Router is out of date or damaged

Router is damaged or placed far from your device

Interference on the network

Massive service outage

Being in an area with limited or no internet connection

WiFi driver isn’t compatible with your the current version of your operating system

What to Do When Your WiFi Keeps Disconnecting

While there are varying reasons why your WiFi connection keeps dropping, you can troubleshoot most of them yourself. Before we go into more complex solutions, try some of these quick checks to get your WiFi back up and running again in no time.

Quick Checks

Check whether your WiFi switch is set to On.

Ensure that you’re using the correct WiFi connection.

Make sure everything on your router is plugged in the way it should be.

Check the lights on your router to see if any seem unusual or other than green. You can use your router manual to know what each light means and how to resolve any problems.

Move your device closer to the router especially where there’s lots of interference.  You can also get a WiFi range extender to boost your WiFi signal’s strength.

Plug an Ethernet cable into your device and check if the connection is strong again. If it works, the issue is with the wireless signal.

Check with your ISP whether there are any connection issues or service outages in your area.

Remove any objects or electronics that could be interfering with your router.

Update or Reinstall WiFi Adapter Driver Check Power Management Settings

Your computer’s Power Management settings may disable your wireless adapter and cause it to disconnect temporarily. You can make a small adjustment to your settings and resolve the problem.

Check DHCP Settings

DHCP (Dynamic Host Configuration Protocol) automatically distributes IP addresses across the network so that your devices can connect and communicate over the web. If there’s a problem with the DHCP, your WiFi won’t work properly.

Resolve Dropped or Lost WiFi Connections

If your WiFi is still disconnecting even after trying the steps in this guide, you can factory reset your computer or your router to return them to out-of-the-box factory settings. You’ll lose all your settings and data during a factory reset so make sure you backup any data on your computer.

Once you reset your router, give it time to set itself up and check your WiFi connection again. If all else fails, contact your ISP for more guided assistance or get WiFi without an internet provider.

5 Best Web Browsers To Watch Hbo Go On All Your Devices

5 Best Web Browsers to Watch HBO Go on All Your Devices You’ll need a browser with built-in VPN to watch HBO GO abroad





GO is an extremely popular on-demand streaming service available on almost every platform.

If you prefer streaming your favorite show on a browser, we recommend the best ones in this guide.

Browsers became indispensable from our devices. Read more about them by exploring our Browsers page.

Our Web & Cloud Hub offers expert guidance about cloud storage, streaming, and more tools and services.

Struggling with various browser issues? Try a better option: Opera One

You deserve a better browser! Over 300 million people use Opera One daily, a fully-fledged navigation experience coming with various built-in packages, enhanced resource consumption, and great design.

Here’s what Opera One can do:

Optimize resource usage: Opera One uses your Ram more efficiently than Brave

AI and User Friendly: New feature directly accessible from the sidebar

Gaming friendly: Opera GX is the first and best browser for gamers

⇒ Get Opera One

In this article, we share our list comparing the best browser for HBO GO.

HBO GO is a fantastic streaming service that lets you watch your favorite HBO shows on almost any device. It is an excellent alternative to streaming platforms like Netflix and Amazon Prime.

Some users prefer using their web browser for multimedia, and if that’s the case with you, today we’ll show you the best browsers to watch HBO GO.

Which browsers support HBO Go?

Many modern browsers support HBO Go, but for optimal performance, here are our top recommendations:

Opera One





We will tell you why we love these browsers later in the article, but note that since there are a lot of compatible browsers, this is not an exhaustive list.

Which browser is best for streaming?

We will talk more about this browser later in this article.

The first item on our list is the Opera One browser. This browser has low hardware requirements, so it will leave more than enough power for streaming.

Thanks to the built-in ad blocker, the hardware used is even lower, and your multimedia content will load up to 90% faster.

The browser also has a battery saver feature that can give you up to an extra hour of battery life.

It’s worth mentioning that Opera One supports customization, allowing you to tweak your start page with various news feeds easily.

If you use it for multimedia, you’ll be pleased to hear that Opera One has a video pop-out feature that lets you watch videos in a separate mini window while working on other tasks.

Lastly, with native integration for services like Twitch, Discord and various messaging and social media apps it is an excellent choice for multitasking.

Notable Opera One features:

Built-in VPN with unlimited bandwidth

Screenshot tool

Available on all major desktop and mobile platforms

Ability to easily share files and links between devices with Opera Flow

Advanced tab organization with workspaces and tab islands

Built-in AI, free and up to date

Opera One

Opera One is the number 1 browser for streaming thanks to its low hardware requirements and built-in ad blocker and VPN!

Free Download Visit website

If you want to watch HBO GO, Microsoft Edge might be the best browser for the service. Edge was recently completely revamped, and it now has various new and exciting features.

Edge has a native 4K support for streaming, but this feature only currently works with Netflix.

Although Edge was previously exclusively available on Windows 10, the revamped version can also work with older builds.

That’s not all; the new version is available on macOS, iOS, and Android. It also has better privacy control and protection, so you can choose what tracking cookies you want to block.

Notable Edge features:

New and sleek interface based on Chromium engine

Support for Chrome extensions

Ability to customize your home page

Immersive Reader

Built-in malware protection

⇒ Download Microsoft Edge

Expert tip:

Thanks to native Chromecast support, you can easily stream content from your PC or phone to any Chromecast device.

As for additional features, we have to mention thousands of available extensions that let you customize and enhance your browser.

Speaking of customization, Chrome allows you to customize your start page with various themes easily.

Regarding performance, this browser is optimized for multitasking and can easily handle multiple tabs.

Notable Chrome features:

Available on all major desktop and mobile platforms

Built-in password manager


Native translation feature that can cover entire pages

Protection against malicious websites

⇒ Download Google Chrome

If you’re looking for a multimedia browser, then Torch might be a perfect choice. The browser has a Music feature that allows you to access your favorite music and YouTube videos without leaving your current tab.

The browser fully supports Drag and Drop for navigation, so you can efficiently perform searches or share files simply by dragging and dropping.

Speaking of sharing, the browser has an integrated sharing feature that works with Facebook and Twitter.

Notable Torch features:

Can work as a torrent client

Built-in games

Built-in multimedia player

Ability to download any multimedia content

⇒ Download Torch

If you’re looking for a browser that works with HBO GO and protects your privacy, you should consider Firefox.

This browser is completely open-source, and since a non-profit organization makes it, it won’t sell your browsing data to third parties.

Regarding multimedia, Firefox has a pop-out video player that lets you watch videos while working on different tasks. As for privacy, Enhanced Tracking Protection can block more than 2000 other trackers.

Firefox also lets you store your passwords, but you can easily access them on any platform with the Firefox Lockwise app.

Notable Firefox features:

Hundreds of available extensions

Ability to inform you if your account is compromised in a data breach

Customizable user interface

Available on all desktop and mobile platforms

Synchronization feature

⇒ Download Mozilla Firefox

There you have it, our list containing our recommendations for the best browser for HBO GO. Note that these also make our list of the best browser for HBO MAX.

Remember that this service is not available in every country, so you may also need to use any of the best browsers for streaming to get the best content and viewing experience.

Still experiencing issues?

Was this page helpful?


Start a conversation

How To Fix Bluetooth Connection Problems In Macos

Bluetooth is a quick and convenient way to transfer files between your Mac and other Bluetooth-enabled devices. That is why it can be frustrating when Bluetooth doesn’t work on your machine. This tutorial will run through all the fixes for trying to fix Bluetooth connection problems in macOS.

1. Is Bluetooth enabled on both devices?

There’s a chance you may have accidentally disabled Bluetooth on either your Mac or the target device(s). It may sound obvious, but it’s always worth double-checking that Bluetooth really is enabled!

On macOS

If you added the Bluetooth icon to your Mac’s menu bar, then a quick glance will tell you whether it’s enabled.

If the Bluetooth icon isn’t displayed as part of your Mac’s menu bar, then:

On the target device

If the target device is a peripheral such as a mouse or keyboard, then try flipping it over and checking for a switch or a button that enables Bluetooth. If the device is a smartphone or computer, you should check the device’s settings to make sure the Bluetooth is turned on.

2. Does your peripheral have power?

For peripherals like computer mice and keyboards, it isn’t always so obvious when it is running out of power. Your Mac cannot connect to a device that’s turned off, so check that the peripheral has power!

Many peripherals have LEDs that indicate when the device is switched on. If these LEDs aren’t illuminated as expected, this may indicate that the device isn’t switched on, so try toggling its “on/off” switch. If the device is battery-powered, check that the batteries haven’t come loose or try inserting a new set of batteries.

Some peripherals may also enter power-saving mode when they’ve been inactive for an extended period of time. If you suspect your peripheral may have fallen asleep, try interacting with it. For example, press a few keys on your Bluetooth-enabled keyboard. Once the device wakes up, it should be ready to connect to your Mac over Bluetooth.

Does your peripheral have enough power?

Just because a peripheral has some battery power doesn’t mean it has enough juice to maintain a Bluetooth connection. Some devices disable Bluetooth automatically when their battery drops below a certain level.

If you suspect your peripheral may be running low on battery, try connecting it to a power outlet, insert new batteries, or put its batteries on charge.

3. Is there some outstanding setup?

If you’re trying to connect a device for the very first time, there is always a pairing process you need to perform:

1. Select the Apple logo in your Mac’s menu bar.

2. Select “System Preferences.”

3. Choose the preference pane that corresponds to the peripheral you’re having issues with, such as Keyboard or Mouse. This pane should contain some settings that you can use to connect the peripheral to your Mac, such as “Set Up Bluetooth Keyboard … ”

Even if you previously connected this device to your Mac, you may need to repeat the setup process if you’ve recently updated macOS or performed any kind of factory reset.

4. Is your Bluetooth preference list corrupt?

If you’ve tried all the above fixes and macOS is still refusing to connect over Bluetooth, then your Bluetooth preference list may be to blame. The Bluetooth.plist file can become corrupted over time, so deleting Bluetooth.plist and letting macOS regenerate this file can resolve a host of Bluetooth-related issues.

To delete your Bluetooth preference list:

2. Copy/paste the following command into the Terminal window:









3. When prompted, enter your password.

4. Restart your Mac.

Your Mac will now recreate the Bluetooth preference list automatically.

5. Resetting NVRAM

Non-volatile random-access memory (NVRAM) is a small amount of memory where macOS stores the settings it needs to access quickly, including some settings related to Bluetooth. If these settings become corrupted, it can cause a range of technical issues, so resetting your NVRAM may resolve your Bluetooth connection problems.

Before we begin, just be aware that resetting NVRAM will also reset your system settings and preferences, so you may need to spend some time reapplying these settings following an NVRAM reset.

To reset NVRAM:

1. Shut down your Mac as normal.

2. Power up your Mac and immediately press Option + Command P + R. Keep holding these keys until your Mac restarts.

3. Release the keys.

You’ve now successfully reset your Mac’s NVRAM.

6. Reset the Bluetooth module

1. On your desktop, hold down the Shift + Option keys.

3. Select Debug.

You’ll now have access to two debug settings to reset your Mac’s Bluetooth settings:

Reset the Bluetooth module: This will wipe all of the Bluetooth hardware module’s settings. Resetting the module will disconnect every device and peripheral that’s currently connected to your Mac via Bluetooth, so you’ll temporarily lose connection and may need to manually reconnect some or all of your devices following the module reset.

Factory reset all connected Apple devices: This will restore factory settings for all Apple-branded devices currently connected to your Mac.

Hopefully, one of the above solutions helped you fix the Bluetooth connection problems in macOS. If you are using a lot of Bluetooth devices, make sure you understand the security issues of Bluetooth and how to protect yourself.

Jessica Thornsby

Jessica Thornsby is a technical writer based in Derbyshire, UK. When she isn’t obsessing over all things tech, she enjoys researching her family tree, and spending far too much time with her house rabbits.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

How To Fix The ‘Unfortunately, App Has Stopped’ Messages

How To Fix The ‘Unfortunately, App Has Stopped’ Messages Why You Get Such Errors?

Clean Your RAM

The most basic step is to clean RAM to remove ‘Unfortunately, App Has Stopped’ error message on Android smartphones. Several apps running in the background eats up a lot of RAM. It may be possible that there is less RAM available to run the application due to which the app keeps stopping repeatedly and shows ‘Unfortunately, App Has Stopped’ error.

Clear Cache Memory

Cleaning the cache memory of the faulty application is also a good idea to resolve ‘Unfortunately, App Has Stopped’ error message. Cache files are one of the most common reasons to generate such kind of errors. Cleaning cache should solve most of the major issues with an application as it restarts the application with fresh files associated with it.

To clear cache files, open ‘Settings’ of your device and go to ‘Applications’ or ‘Apps’. Select ‘All’ to list all Apps and navigate to the app that is creating issues. Go to the ‘Storage’ section and then tap on ‘Clear Data’ or ‘Clear Cache’. If needed you may also ‘Force stop’ the app to give it a new start.

Smart Phone Cleaner will ensure that your App works properly and you do not encounter such error messages due to system issues.

Restart Your Device

Restarting your device is known as a soft reset that can also fix the issue as when you turn off the device, it closes all the apps and cleans the cache files and on a restart, the app will ignite with a fresh cache. This is one of the most basic troubleshooting which you should perform whenever you feel that your device is not listening to you.

Uninstall & Re-install the App

At times, data packets of newly installed Apps don’t unbox properly and hence the app keeps stopping and crashes repeatedly. It may be due to hardware or software compatibility resulting in ‘Unfortunately, App Has Stopped’ error message or any other failure. It is recommended to uninstall the App and then reinstall it back from Google Play Store and see if it still gives an error. If you still get the same error, that clearly indicates that the App is not compatible with the available software and hardware configurations of the device.

Perform a Factory Reset

Performing a factory reset should be the last step while troubleshooting issues related to the device you are using. Just one faulty app should not trigger a factory reset as if one app isn’t working, that can be the issue with the app. If multiple apps are not functioning properly, you should factory reset the settings and make them as good as new.

Before performing a Factory Reset, it is highly recommended to take proper backup of your device as Factory reset will erase all the files, folders, app updates, contacts, messages, pictures music, and everything you installed on the device. It will be as good as a new device and you will need to install everything back on the device. Go to ‘Settings’ and navigate to ‘Backup and Restore’ menu once you have taken a proper backup, you can tap on ‘Factory Reset’ to get the device back to original factory settings.

Backup Your Device with Right Backup

If you are looking for a permanent backup solution and want to ensure that all your files, folders, app updates, contacts, messages, pictures music, and everything you installed on the device remain intact with a proper backup, it is highly recommended to use ‘Right Backup Anywhere – Online Cloud Storage’ app. This is the most intelligent app to automatically take a backup of everything on your device on a realtime basis.

Using Right Backup, You can ensure that all your data is safe on the cloud storage and you can share files of any size after performing a security check. You can take a backup anytime and restore it back on your device after Factory Reset without any sort of data loss.

Summing Up

If your Google Play service keeps stopping, or you get ‘unfortunately, app has stopped’ error message while using Android Apps, the above steps can help fix these Android problems. We have reviewed various reasons why app keeps stopping and how to fix such android problems and smart ways to get rid of ‘unfortunately, app has stopped’ error message.

Follow Us:

Quick Reaction:

About the author

Raj Soni

Update the detailed information about The Connection Has Timed Out: How To Fix It On All Browsers on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!